* [PATCH v4 0/1] arm64: dts: mt8195: Add Ethernet controller
@ 2022-10-20 8:52 Biao Huang
2022-10-20 8:52 ` [PATCH v4] " Biao Huang
0 siblings, 1 reply; 3+ messages in thread
From: Biao Huang @ 2022-10-20 8:52 UTC (permalink / raw)
To: AngeloGioacchino Del Regno, Rob Herring, Krzysztof Kozlowski,
Matthias Brugger
Cc: devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
Biao Huang, macpaul.lin
Changes in v4:
1. remove {address,size}-cells = <0> to avoid warning as Angelo's feedback.
2. Add reviewd-by as Angelo's comments.
Changes in v3:
1. move stmmac-axi-config, rx-queues-config, tx-queues-configs inside ethernet node
as Angelo's comments.
2. add {address,size}-cells = <0> in ethernet node as Angelo's comments.
Changes in v2:
1. modify pinctrl node used by ethernet to match rules in pinctrl-mt8195.yaml,
which is pointed by Krzysztof.
2. remove "mac-address" property in ethernet node as comments of Krzysztof.
Changes in v1:
add dts node for MT8195 Ethernet controller
Biao Huang (1):
arm64: dts: mt8195: Add Ethernet controller
arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 88 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 86 +++++++++++++++++++
2 files changed, 174 insertions(+)
--
2.18.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v4] arm64: dts: mt8195: Add Ethernet controller
2022-10-20 8:52 [PATCH v4 0/1] arm64: dts: mt8195: Add Ethernet controller Biao Huang
@ 2022-10-20 8:52 ` Biao Huang
2022-11-24 3:45 ` Macpaul Lin
0 siblings, 1 reply; 3+ messages in thread
From: Biao Huang @ 2022-10-20 8:52 UTC (permalink / raw)
To: AngeloGioacchino Del Regno, Rob Herring, Krzysztof Kozlowski,
Matthias Brugger
Cc: devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
Biao Huang, macpaul.lin
Add Ethernet controller node for mt8195.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 88 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 86 +++++++++++++++++++
2 files changed, 174 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 4fbd99eb496a..0e8496d837ef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -258,6 +258,72 @@ &mt6359_vsram_others_ldo_reg {
};
&pio {
+ eth_default_pins: eth-default-pins {
+ pins-txd {
+ pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+ <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+ <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+ <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ };
+ pins-cc {
+ pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+ <PINMUX_GPIO88__FUNC_GBE_TXEN>,
+ <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+ <PINMUX_GPIO86__FUNC_GBE_RXC>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ };
+ pins-rxd {
+ pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+ <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+ <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+ <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+ };
+ pins-mdio {
+ pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+ <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+ input-enable;
+ };
+ pins-power {
+ pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+ <PINMUX_GPIO92__FUNC_GPIO92>;
+ output-high;
+ };
+ };
+
+ eth_sleep_pins: eth-sleep-pins {
+ pins-txd {
+ pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+ <PINMUX_GPIO78__FUNC_GPIO78>,
+ <PINMUX_GPIO79__FUNC_GPIO79>,
+ <PINMUX_GPIO80__FUNC_GPIO80>;
+ };
+ pins-cc {
+ pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+ <PINMUX_GPIO88__FUNC_GPIO88>,
+ <PINMUX_GPIO87__FUNC_GPIO87>,
+ <PINMUX_GPIO86__FUNC_GPIO86>;
+ };
+ pins-rxd {
+ pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+ <PINMUX_GPIO82__FUNC_GPIO82>,
+ <PINMUX_GPIO83__FUNC_GPIO83>,
+ <PINMUX_GPIO84__FUNC_GPIO84>;
+ };
+ pins-mdio {
+ pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+ <PINMUX_GPIO90__FUNC_GPIO90>;
+ input-disable;
+ bias-disable;
+ };
+ pins-power {
+ pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+ <PINMUX_GPIO92__FUNC_GPIO92>;
+ input-disable;
+ bias-disable;
+ };
+ };
+
gpio_keys_pins: gpio-keys-pins {
pins {
pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
@@ -434,6 +500,28 @@ &xhci0 {
status = "okay";
};
+ð {
+ phy-mode ="rgmii-rxid";
+ phy-handle = <ðernet_phy0>;
+ snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+ snps,reset-delays-us = <0 10000 10000>;
+ mediatek,tx-delay-ps = <2030>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <ð_default_pins>;
+ pinctrl-1 = <ð_sleep_pins>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet_phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <0x1>;
+ };
+ };
+};
+
&xhci1 {
vusb33-supply = <&mt6359_vusb_ldo_reg>;
status = "okay";
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 905d1a90b406..0639ad9d261c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1042,6 +1042,92 @@ spis1: spi@1101e000 {
status = "disabled";
};
+ eth: ethernet@11021000 {
+ compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a";
+ reg = <0 0x11021000 0 0x4000>;
+ interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "macirq";
+ clock-names = "axi",
+ "apb",
+ "mac_cg",
+ "mac_main",
+ "ptp_ref",
+ "rmii_internal";
+ clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
+ <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
+ <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>,
+ <&topckgen CLK_TOP_SNPS_ETH_250M>,
+ <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+ <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
+ assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
+ <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+ <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
+ assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
+ <&topckgen CLK_TOP_ETHPLL_D8>,
+ <&topckgen CLK_TOP_ETHPLL_D10>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>;
+ mediatek,pericfg = <&infracfg_ao>;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,txpbl = <16>;
+ snps,rxpbl = <16>;
+ snps,clk-csr = <0>;
+ status = "disabled";
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ queue2 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ queue3 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x0>;
+ };
+ queue1 {
+ snps,weight = <0x11>;
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+ queue2 {
+ snps,weight = <0x12>;
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+ queue3 {
+ snps,weight = <0x13>;
+ snps,dcb-algorithm;
+ snps,priority = <0x3>;
+ };
+ };
+ };
+
xhci0: usb@11200000 {
compatible = "mediatek,mt8195-xhci",
"mediatek,mtk-xhci";
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v4] arm64: dts: mt8195: Add Ethernet controller
2022-10-20 8:52 ` [PATCH v4] " Biao Huang
@ 2022-11-24 3:45 ` Macpaul Lin
0 siblings, 0 replies; 3+ messages in thread
From: Macpaul Lin @ 2022-11-24 3:45 UTC (permalink / raw)
To: Biao Huang, AngeloGioacchino Del Regno, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger
Cc: devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
Miles Chen, Pablo Sun, Bear Wang
On 10/20/22 16:52, Biao Huang wrote:
> Add Ethernet controller node for mt8195.
>
> Signed-off-by: Biao Huang <biao.huang@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Dear Matthias,
Biao also found this patch for ethernet node seems missing in 6.2 dts
pull-request.
Just a remind for this patch.
Please help to review this patch if you have time.
Thanks!
> ---
> arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 88 ++++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 86 +++++++++++++++++++
> 2 files changed, 174 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> index 4fbd99eb496a..0e8496d837ef 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> @@ -258,6 +258,72 @@ &mt6359_vsram_others_ldo_reg {
> };
>
> &pio {
> + eth_default_pins: eth-default-pins {
> + pins-txd {
> + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
> + <PINMUX_GPIO78__FUNC_GBE_TXD2>,
> + <PINMUX_GPIO79__FUNC_GBE_TXD1>,
> + <PINMUX_GPIO80__FUNC_GBE_TXD0>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + };
> + pins-cc {
> + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
> + <PINMUX_GPIO88__FUNC_GBE_TXEN>,
> + <PINMUX_GPIO87__FUNC_GBE_RXDV>,
> + <PINMUX_GPIO86__FUNC_GBE_RXC>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + };
> + pins-rxd {
> + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
> + <PINMUX_GPIO82__FUNC_GBE_RXD2>,
> + <PINMUX_GPIO83__FUNC_GBE_RXD1>,
> + <PINMUX_GPIO84__FUNC_GBE_RXD0>;
> + };
> + pins-mdio {
> + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
> + <PINMUX_GPIO90__FUNC_GBE_MDIO>;
> + input-enable;
> + };
> + pins-power {
> + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
> + <PINMUX_GPIO92__FUNC_GPIO92>;
> + output-high;
> + };
> + };
> +
> + eth_sleep_pins: eth-sleep-pins {
> + pins-txd {
> + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
> + <PINMUX_GPIO78__FUNC_GPIO78>,
> + <PINMUX_GPIO79__FUNC_GPIO79>,
> + <PINMUX_GPIO80__FUNC_GPIO80>;
> + };
> + pins-cc {
> + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
> + <PINMUX_GPIO88__FUNC_GPIO88>,
> + <PINMUX_GPIO87__FUNC_GPIO87>,
> + <PINMUX_GPIO86__FUNC_GPIO86>;
> + };
> + pins-rxd {
> + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
> + <PINMUX_GPIO82__FUNC_GPIO82>,
> + <PINMUX_GPIO83__FUNC_GPIO83>,
> + <PINMUX_GPIO84__FUNC_GPIO84>;
> + };
> + pins-mdio {
> + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
> + <PINMUX_GPIO90__FUNC_GPIO90>;
> + input-disable;
> + bias-disable;
> + };
> + pins-power {
> + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
> + <PINMUX_GPIO92__FUNC_GPIO92>;
> + input-disable;
> + bias-disable;
> + };
> + };
> +
> gpio_keys_pins: gpio-keys-pins {
> pins {
> pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
> @@ -434,6 +500,28 @@ &xhci0 {
> status = "okay";
> };
>
> +ð {
> + phy-mode ="rgmii-rxid";
> + phy-handle = <ðernet_phy0>;
> + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
> + snps,reset-delays-us = <0 10000 10000>;
> + mediatek,tx-delay-ps = <2030>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <ð_default_pins>;
> + pinctrl-1 = <ð_sleep_pins>;
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ethernet_phy0: ethernet-phy@1 {
> + compatible = "ethernet-phy-id001c.c916";
> + reg = <0x1>;
> + };
> + };
> +};
> +
> &xhci1 {
> vusb33-supply = <&mt6359_vusb_ldo_reg>;
> status = "okay";
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 905d1a90b406..0639ad9d261c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1042,6 +1042,92 @@ spis1: spi@1101e000 {
> status = "disabled";
> };
>
> + eth: ethernet@11021000 {
> + compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a";
> + reg = <0 0x11021000 0 0x4000>;
> + interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "macirq";
> + clock-names = "axi",
> + "apb",
> + "mac_cg",
> + "mac_main",
> + "ptp_ref",
> + "rmii_internal";
> + clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
> + <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
> + <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>,
> + <&topckgen CLK_TOP_SNPS_ETH_250M>,
> + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
> + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
> + assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
> + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
> + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
> + assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
> + <&topckgen CLK_TOP_ETHPLL_D8>,
> + <&topckgen CLK_TOP_ETHPLL_D10>;
> + power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>;
> + mediatek,pericfg = <&infracfg_ao>;
> + snps,axi-config = <&stmmac_axi_setup>;
> + snps,mtl-rx-config = <&mtl_rx_setup>;
> + snps,mtl-tx-config = <&mtl_tx_setup>;
> + snps,txpbl = <16>;
> + snps,rxpbl = <16>;
> + snps,clk-csr = <0>;
> + status = "disabled";
> +
> + stmmac_axi_setup: stmmac-axi-config {
> + snps,wr_osr_lmt = <0x7>;
> + snps,rd_osr_lmt = <0x7>;
> + snps,blen = <0 0 0 0 16 8 4>;
> + };
> +
> + mtl_rx_setup: rx-queues-config {
> + snps,rx-queues-to-use = <4>;
> + snps,rx-sched-sp;
> + queue0 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x0>;
> + };
> + queue1 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x0>;
> + };
> + queue2 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x0>;
> + };
> + queue3 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x0>;
> + };
> + };
> +
> + mtl_tx_setup: tx-queues-config {
> + snps,tx-queues-to-use = <4>;
> + snps,tx-sched-wrr;
> + queue0 {
> + snps,weight = <0x10>;
> + snps,dcb-algorithm;
> + snps,priority = <0x0>;
> + };
> + queue1 {
> + snps,weight = <0x11>;
> + snps,dcb-algorithm;
> + snps,priority = <0x1>;
> + };
> + queue2 {
> + snps,weight = <0x12>;
> + snps,dcb-algorithm;
> + snps,priority = <0x2>;
> + };
> + queue3 {
> + snps,weight = <0x13>;
> + snps,dcb-algorithm;
> + snps,priority = <0x3>;
> + };
> + };
> + };
> +
> xhci0: usb@11200000 {
> compatible = "mediatek,mt8195-xhci",
> "mediatek,mtk-xhci";
Regards,
Macpaul Lin
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-11-24 3:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-10-20 8:52 [PATCH v4 0/1] arm64: dts: mt8195: Add Ethernet controller Biao Huang
2022-10-20 8:52 ` [PATCH v4] " Biao Huang
2022-11-24 3:45 ` Macpaul Lin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).