Re: [PATCH 10/49] ath11k: add debug.c

[Anilkumar Kolli <akolli-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]

On 2019-08-26 19:17, Sven Eckelmann wrote:
> On Tuesday, 20 August 2019 17:47:36 CEST Kalle Valo wrote:
>> +static ssize_t ath11k_read_simulate_fw_crash(struct file *file,
>> +                                            char __user *user_buf,
>> +                                            size_t count, loff_t 
>> *ppos)
>> +{
>> +       const char buf[] =
>> +               "To simulate firmware crash write one of the keywords 
>> to this file:\n"
>> +               "`assert` - this will send WMI_FORCE_FW_HANG_CMDID to 
>> firmware to cause assert.\n"
>> +               "`hw-restart` - this will simply queue hw restart 
>> without fw/hw actually crashing.\n";
>> +
>> +       return simple_read_from_buffer(user_buf, count, ppos, buf, 
>> strlen(buf));
>> +}
> 
> There is nothing in the write handler which handles "hw-restart". It 
> just
> causes an -EINVAL.
> 

Yes. I will add "hw-restart".

>> +
>> +/* Simulate firmware crash:
>> + * 'soft': Call wmi command causing firmware hang. This firmware hang 
>> is
>> + * recoverable by warm firmware reset.
>> + * 'hard': Force firmware crash by setting any vdev parameter for not 
>> allowed
>> + * vdev id. This is hard firmware crash because it is recoverable 
>> only by cold
>> + * firmware reset.
>> + */
>> +static ssize_t ath11k_write_simulate_fw_crash(struct file *file,
>> +                                             const char __user 
>> *user_buf,
>> +                                             size_t count, loff_t 
>> *ppos)
>> +{
>> +       struct ath11k_base *ab = file->private_data;
>> +       struct ath11k_pdev *pdev;
>> +       struct ath11k *ar = ab->pdevs[0].ar;
>> +       char buf[32] = {0};
>> +       ssize_t rc;
>> +       int i, ret, radioup;
>> +
>> +       for (i = 0; i < ab->num_radios; i++) {
>> +               pdev = &ab->pdevs[i];
>> +               ar = pdev->ar;
>> +               if (ar && ar->state == ATH11K_STATE_ON) {
>> +                       radioup = 1;
>> +                       break;
>> +               }
>> +       }
>> +       /* filter partial writes and invalid commands */
>> +       if (*ppos != 0 || count >= sizeof(buf) || count == 0)
>> +               return -EINVAL;
>> +
>> +       rc = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, 
>> user_buf, count);
>> +       if (rc < 0)
>> +               return rc;
>> +
>> +       /* drop the possible '\n' from the end */
>> +       if (buf[*ppos - 1] == '\n')
>> +               buf[*ppos - 1] = '\0';
>> +
>> +       if (radioup == 0) {
>> +               ret = -ENETDOWN;
>> +               goto exit;
>> +       }
>> +
>> +       if (!strcmp(buf, "assert")) {
>> +               ath11k_info(ab, "simulating firmware assert crash\n");
>> +               ret = ath11k_wmi_force_fw_hang_cmd(ar,
>> +                                                  
>> ATH11K_WMI_FW_HANG_ASSERT_TYPE,
>> +                                                  
>> ATH11K_WMI_FW_HANG_DELAY);
>> +       } else {
>> +               ret = -EINVAL;
>> +               goto exit;
>> +       }
>> +
>> +       if (ret) {
>> +               ath11k_warn(ab, "failed to simulate firmware crash: 
>> %d\n", ret);
>> +               goto exit;
>> +       }
>> +
>> +       ret = count;
>> +
>> +exit:
>> +       return ret;
>> +}
> 
> And right now, the write of an "assert" to this file just causes an
> fatal error for the system:
> 
>     [ 4312.409255] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: fatal
> error received:
>     [ 4312.409255] QC Image Version:
> QC_IMAGE_VERSION_STRING=WLAN.HK.2.1.0.1-00410-QCAHKSWPL_SILICONZ-2
>     [ 4312.409255] Image Variant : 
> IMAGE_VARIANT_STRING=8074.wlanfw.eval_v2Q
>     [ 4312.409255]
>     [ 4312.409255] wlan_wmi.c:234 Assertion 0 failedparam0 :zero,
> param1 :zero, param2 :zero.
>     [ 4312.409255] Thread ID      : 0x00000069  Thread name    : WLAN
> RT0  Process ID     : 0
>     [ 4312.409255] Register:
>     [ 4312.409255] SP : 0x4c168d58
>     [ 4312.409255] FP : 0x4c168d60
>     [ 4312.409255] PC : 0x4b1c8850
>     [ 4312.409255] SSR : 0x00000008
>     [ 4312.409255] BADVA : 0x00020000
>     [ 4312.409255] LR : 0x4b1c7c68
>     [ 4312.409255]
>     [ 4312.409255] Stack Dump
>     [ 4312.409255] from : 0x4c168d58
>     [ 4312.409255] to   : 0x4c168f00
>     [ 4312.409255]
>     [ 4312.455997] remoteproc remoteproc0: crash detected in
> cd00000.qcom_q6v5_wcss: type fatal error
>     [ 4312.478259] remoteproc remoteproc0: handling crash #1 in
> cd00000.qcom_q6v5_wcss
>     [ 4312.486826] Kernel panic - not syncing: remoteproc remoteproc0:
> Resetting the SoC - cd00000.qcom_q6v5_wcss crashed
>     [ 4312.494028] CPU: 2 PID: 5590 Comm: kworker/2:0 Tainted: G
>  W       4.4.60 #0
>     [ 4312.504436] Hardware name: Generic DT based system
>     [ 4312.511991] Workqueue: events rproc_crash_handler_work
>     [ 4312.521880] [<8021e86c>] (unwind_backtrace) from [<8021b404>]
> (show_stack+0x10/0x14)
>     [ 4312.521979] [<8021b404>] (show_stack) from [<803dd818>]
> (dump_stack+0x7c/0x9c)
>     [ 4312.529789] [<803dd818>] (dump_stack) from [<80225d80>]
> (panic+0x84/0x1f8)
>     [ 4312.536818] [<80225d80>] (panic) from [<80555278>]
> (rproc_crash_handler_work+0x90/0x98)
>     [ 4312.543678] [<80555278>] (rproc_crash_handler_work) from
> [<802380e8>] (process_one_work+0x1c0/0x2f8)
>     [ 4312.551578] [<802380e8>] (process_one_work) from [<80238d24>]
> (worker_thread+0x2b0/0x3ec)
>     [ 4312.560952] [<80238d24>] (worker_thread) from [<8023cf84>]
> (kthread+0xd8/0xec)
>     [ 4312.569023] [<8023cf84>] (kthread) from [<80209be8>]
> (ret_from_fork+0x14/0x2c)
>     [ 4312.576141] CPU0: stopping
>     [ 4312.583335] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W
>     4.4.60 #0
>     [ 4312.586032] Hardware name: Generic DT based system
>     [ 4312.593237] [<8021e86c>] (unwind_backtrace) from [<8021b404>]
> (show_stack+0x10/0x14)
>     [ 4312.597930] [<8021b404>] (show_stack) from [<803dd818>]
> (dump_stack+0x7c/0x9c)
>     [ 4312.605827] [<803dd818>] (dump_stack) from [<8021dc3c>]
> (handle_IPI+0xe8/0x180)
>     [ 4312.612858] [<8021dc3c>] (handle_IPI) from [<802093a4>]
> (gic_handle_irq+0x78/0x94)
>     [ 4312.620063] [<802093a4>] (gic_handle_irq) from [<8020a480>]
> (__irq_svc+0x40/0x74)
>     [ 4312.627701] Exception stack(0x80c67f60 to 0x80c67fa8)
>     [ 4312.635249] 7f60: 00000001 00000000 00000000 8020b320 00000000
> 80c66000 00000000 80c612cc
>     [ 4312.640291] 7f80: 80c67fb8 808f3a30 80cae010 00000000 00000000
> 80c67fb0 80218edc 80218ee0
>     [ 4312.648448] 7fa0: 60000013 ffffffff
>     [ 4312.656601] [<8020a480>] (__irq_svc) from [<80218ee0>]
> (arch_cpu_idle+0x2c/0x50)
>     [ 4312.659909] [<80218ee0>] (arch_cpu_idle) from [<80254b38>]
> (cpu_startup_entry+0x134/0x214)
>     [ 4312.667553] [<80254b38>] (cpu_startup_entry) from [<808cac48>]
> (start_kernel+0x380/0x404)
>     [ 4312.675620] CPU1: stopping
>     [ 4312.683855] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W
>     4.4.60 #0
>     [ 4312.686466] Hardware name: Generic DT based system
>     [ 4312.693671] [<8021e86c>] (unwind_backtrace) from [<8021b404>]
> (show_stack+0x10/0x14)
>     [ 4312.698363] [<8021b404>] (show_stack) from [<803dd818>]
> (dump_stack+0x7c/0x9c)
>     [ 4312.706263] [<803dd818>] (dump_stack) from [<8021dc3c>]
> (handle_IPI+0xe8/0x180)
>     [ 4312.713293] [<8021dc3c>] (handle_IPI) from [<802093a4>]
> (gic_handle_irq+0x78/0x94)
>     [ 4312.720497] [<802093a4>] (gic_handle_irq) from [<8020a480>]
> (__irq_svc+0x40/0x74)
>     [ 4312.728135] Exception stack(0xbe083f98 to 0xbe083fe0)
>     [ 4312.735683] 3f80:
>         00000001 00000000
>     [ 4312.740725] 3fa0: 00000000 8020b320 00000000 be082000 00000000
> 80c612cc be083ff0 410fd034
>     [ 4312.748884] 3fc0: 00000000 00000000 00000000 be083fe8 80218edc
> 80218ee0 60000013 ffffffff
>     [ 4312.757045] [<8020a480>] (__irq_svc) from [<80218ee0>]
> (arch_cpu_idle+0x2c/0x50)
>     [ 4312.765203] [<80218ee0>] (arch_cpu_idle) from [<80254b38>]
> (cpu_startup_entry+0x134/0x214)
>     [ 4312.772669] [<80254b38>] (cpu_startup_entry) from [<4120944c>]
> (0x4120944c)
>     [ 4312.780737] CPU3: stopping
>     [ 4312.787589] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G        W
>     4.4.60 #0
>     [ 4312.790372] Hardware name: Generic DT based system
>     [ 4312.797577] [<8021e86c>] (unwind_backtrace) from [<8021b404>]
> (show_stack+0x10/0x14)
>     [ 4312.802270] [<8021b404>] (show_stack) from [<803dd818>]
> (dump_stack+0x7c/0x9c)
>     [ 4312.810167] [<803dd818>] (dump_stack) from [<8021dc3c>]
> (handle_IPI+0xe8/0x180)
>     [ 4312.817199] [<8021dc3c>] (handle_IPI) from [<802093a4>]
> (gic_handle_irq+0x78/0x94)
>     [ 4312.824403] [<802093a4>] (gic_handle_irq) from [<8020a480>]
> (__irq_svc+0x40/0x74)
>     [ 4312.832041] Exception stack(0xbe087f98 to 0xbe087fe0)
>     [ 4312.839588] 7f80:
>         00000001 00000000
>     [ 4312.844630] 7fa0: 00000000 8020b320 00000000 be086000 00000000
> 80c612cc be087ff0 410fd034
>     [ 4312.852791] 7fc0: 00000000 00000000 00000000 be087fe8 80218edc
> 80218ee0 60000013 ffffffff
>     [ 4312.860951] [<8020a480>] (__irq_svc) from [<80218ee0>]
> (arch_cpu_idle+0x2c/0x50)
>     [ 4312.869109] [<80218ee0>] (arch_cpu_idle) from [<80254b38>]
> (cpu_startup_entry+0x134/0x214)
>     [ 4312.876576] [<80254b38>] (cpu_startup_entry) from [<4120944c>]
> (0x4120944c)
>     [ 4312.884650] The reading for sensor 4 is 0x002041f7
>     [ 4312.891499] The reading for sensor 5 is 0x002051f4
>     [ 4312.896415] Couldn't get reading for sensor 6
>     [ 4312.901189] Couldn't get reading for sensor 7
>     [ 4312.905561] The reading for sensor 8 is 0x002081e0
>     [ 4312.909902] The reading for sensor 9 is 0x002091f7
>     [ 4312.914645] Couldn't get reading for sensor 10
>     [ 4312.919364] The reading for sensor 11 is 0x0020b1fa
>     [ 4312.923791] The reading for sensor 12 is 0x0020c1fa
>     [ 4312.928621] Couldn't get reading for sensor 13
>     [ 4312.933425] The reading for sensor 14 is 0x0020e1f4
>     [ 4312.937941] The reading for sensor 15 is 0x0020f1e7
>     [ 4313.942700] Rebooting in 3 seconds..
> 
> Maybe can be fixed by a different kernel (for the remoteproc). But I 
> don't
> have this kernel at the moment.
> 

The write of an "assert", sends 'WMI_FORCE_FW_HANG_CMDID' WMI command to 
target firmware.
This WMI command forces the target to assert.

Anil

> 
> Kind regards,
> 	Sven
> _______________________________________________
> ath11k mailing list
> ath11k-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/ath11k

-- 
Thanks
Anil.