Re: [PATCH v7 1/4] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 10/15/25 12:52 PM, Krishna Kurapati wrote:
> From: Wesley Cheng <quic_wcheng@quicinc.com>
> 
> Add the base USB devicetree definitions for SM8750 platforms.  The overall
> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
> (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
> transition to using the M31 eUSB2 PHY compared to previous SoCs.
> 
> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---

[...]

> +		usb_1: usb@a6f8800 {
> +			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
> +			reg = <0x0 0x0a6f8800 0x0 0x400>;

Please resend this using the flattened model

Konrad