From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?Q?Andreas_F=c3=a4rber?= Subject: Re: [PATCH] arm64: dts: allwinner: a64: Add UART2 pin nodes Date: Tue, 18 Apr 2017 21:32:19 +0200 Message-ID: <81e89b9b-1b1c-42f7-eabc-e262cfd99735@suse.de> References: <20170414171320.19743-1-afaerber@suse.de> <20170418053458.phcbp4da3vatejpg@lukather> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20170418053458.phcbp4da3vatejpg@lukather> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Chen-Yu Tsai , Rob Herring , Mark Rutland , Catalin Marinas , Will Deacon , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Am 18.04.2017 um 07:34 schrieb Maxime Ripard: > On Fri, Apr 14, 2017 at 07:13:20PM +0200, Andreas Färber wrote: >> UART2 is exposed on the Pi connector of Pine64. Make a pinctrl node >> available at the SoC level, to simplify enabling UART2 via DT overlay. >> >> Signed-off-by: Andreas Färber > > Applied, thanks! Thanks, that was fast. > Could you also create the node in the pine64 DTS (with an explicit > status = "disabled" in there) so that the overlay would be even easier > to make ? Makes sense. I went ahead and did it for all UART nodes then - careful, final patch is neither build- nor runtime-tested yet. Cheers, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html