Re: [PATCH 01/23] ARM: dts: qcom: apq8064: disable HDMI nodes by default

[Neil Armstrong <neil.armstrong@linaro.org>]

On 30/09/2022 20:52, Dmitry Baryshkov wrote:
> Disable HDMI nodes. Individual board can enable them if required. The
> only APQ8064 board that has working HDMI output is IFC6410, which
> enables these devices explicitly.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   arch/arm/boot/dts/qcom-apq8064.dtsi | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 942aa2278355..829e197579b9 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -1470,6 +1470,8 @@ hdmi: hdmi-tx@4a00000 {
>   
>   			phys = <&hdmi_phy>;
>   
> +			status = "disabled";
> +
>   			ports {
>   				#address-cells = <1>;
>   				#size-cells = <0>;
> @@ -1498,6 +1500,8 @@ hdmi_phy: hdmi-phy@4a00400 {
>   			clocks = <&mmcc HDMI_S_AHB_CLK>;
>   			clock-names = "slave_iface";
>   			#phy-cells = <0>;
> +
> +			status = "disabled";
>   		};
>   
>   		mdp: mdp@5100000 {

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>