[PATCH v4 0/2] Add support for Agilex3 SoCFPGA board

[PATCH v4 0/2] Add support for Agilex3 SoCFPGA board

[niravkumarlaxmidas.rabara]

From: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>

Agilex3 SoCFPGA development kit is a low cost and small form factor
development kit similar to Agilex5 013b board.
Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference
being the number of CPU cores — Agilex3 has 2 cores compared to 4 in
Agilex5.

https://www.altera.com/products/devkit/a1jui000005pw9bmas/agilex-3-fpga-and-soc-c-series-development-kit

This series includes:
 - The addition of the Agilex3 compatible in DT bindings.
 - The initial board device tree support for the Agilex3 SoCFPGA.

Note:
The patch 2 depends on the series: "Add iommu supports"
https://lore.kernel.org/all/cover.1760486497.git.khairul.anuar.romli@altera.com/

Patch series "Add iommu supports" is applied to socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19


v4 changes:
 - Retained v3 Reviewed-by for dt bindings patch.
 - Update commit message formatting for dts patch.
 - Use agilex5 dtsi instead of creating new agilex3 dtsi.
 - Update qspi node parititions in dts patch.
v3 link:
https://lore.kernel.org/all/20251112105657.1291563-1-niravkumarlaxmidas.rabara@altera.com/

v3 changes:
 - Add missing agilex5 fallback in dt bindings

v2 link:
https://lore.kernel.org/all/cover.1762840092.git.niravkumarlaxmidas.rabara@altera.com/

v2 changes:
 - Add separate agilex3 compatible.
 - Use separate dtsi file for Agilex3.

v1 link:
https://lore.kernel.org/all/cover.1762756191.git.niravkumarlaxmidas.rabara@altera.com/


Niravkumar L Rabara (2):
  dt-bindings: intel: Add Agilex3 SoCFPGA board
  arm64: dts: socfpga: add Agilex3 board

 .../bindings/arm/intel,socfpga.yaml           |   6 +
 arch/arm64/boot/dts/intel/Makefile            |   1 +
 .../boot/dts/intel/socfpga_agilex3_socdk.dts  | 132 ++++++++++++++++++
 3 files changed, 139 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts

-- 
2.25.1

[PATCH v4 1/2] dt-bindings: intel: Add Agilex3 SoCFPGA board

[niravkumarlaxmidas.rabara]

From: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>

Add compatible string for Agilex3 SoCFPGA board, which shares the same
architecture as Agilex5 but with two fewer CPU cores.

Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---

v4 changes:
 - No change, retained Reviewed-by from v3.
v3 link:
https://lore.kernel.org/all/20251112105657.1291563-2-niravkumarlaxmidas.rabara@altera.com/

v3 changes:
 - Add missing agilex5 fallback.

v2 link:
https://lore.kernel.org/all/e9d398bacb299c996f14c9993bf041a9a6740cbf.1762840092.git.niravkumarlaxmidas.rabara@altera.com/

v2 changes:
 - Add separate agilex3 compatible instead of using agilex5 context.

v1 link:
https://lore.kernel.org/all/51ecc7f4eb7e419c00ee51fc26156e25686dfece.1762756191.git.niravkumarlaxmidas.rabara@altera.com/

 Documentation/devicetree/bindings/arm/intel,socfpga.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
index cf7a91dfec8a..c918837bd41c 100644
--- a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
+++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
@@ -21,6 +21,12 @@ properties:
               - intel,socfpga-agilex-n6000
               - intel,socfpga-agilex-socdk
           - const: intel,socfpga-agilex
+      - description: Agilex3 boards
+        items:
+          - enum:
+              - intel,socfpga-agilex3-socdk
+          - const: intel,socfpga-agilex3
+          - const: intel,socfpga-agilex5
       - description: Agilex5 boards
         items:
           - enum:
-- 
2.25.1

[PATCH v4 2/2] arm64: dts: socfpga: add Agilex3 board

[niravkumarlaxmidas.rabara]

From: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>

Agilex3 SoCFPGA development kit is a small form factor board similar to
Agilex5 013b board. Agilex3 is derived from Agilex5 SoCFPGA, with the main
difference of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.

Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
---

v4 changes:
 - Update commit message formatting.
 - Use agilex5 dtsi instead of creating new agilex3 dtsi.
 - Update qspi node parititions.
v3 link:
https://lore.kernel.org/all/20251112105657.1291563-3-niravkumarlaxmidas.rabara@altera.com/

v3 change:
 - Add agilex5 fallback compatible string.

v2 link:
https://lore.kernel.org/all/97fea9a15bfe2a3d52d5b75bee6bda25615422e7.1762840092.git.niravkumarlaxmidas.rabara@altera.com/

v2 changes:
 - Use separate dtsi file for agilex3 instead of using agilex5 dtsi.

v1 link:
https://lore.kernel.org/all/aa19e005a2aa2aab63c8fe8cbaee7f59c416690f.1762756191.git.niravkumarlaxmidas.rabara@altera.com/

 arch/arm64/boot/dts/intel/Makefile            |   1 +
 .../boot/dts/intel/socfpga_agilex3_socdk.dts  | 132 ++++++++++++++++++
 2 files changed, 133 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts

diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 391d5cbe50b3..a117268267ee 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex_socdk.dtb \
 				socfpga_agilex_socdk_nand.dtb \
+				socfpga_agilex3_socdk.dtb \
 				socfpga_agilex5_socdk.dtb \
 				socfpga_agilex5_socdk_013b.dtb \
 				socfpga_agilex5_socdk_nand.dtb \
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
new file mode 100644
index 000000000000..14b299f19f3a
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex3 SoCDK";
+	compatible = "intel,socfpga-agilex3-socdk", "intel,socfpga-agilex3",
+		     "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		/delete-node/ cpu@2;
+		/delete-node/ cpu@3;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "hps_led0";
+			gpios = <&porta 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&porta 12 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		emac2_phy0: ethernet-phy@0 {
+			reg = <0>;
+			rxc-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txc-skew-ps = <0>;
+			txen-skew-ps = <60>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <60>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x00c00000>;
+			};
+
+			root: partition@c00000 {
+				label = "root";
+				reg = <0x00c00000 0x03400000>;
+			};
+		};
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
-- 
2.25.1

Re: [PATCH v4 0/2] Add support for Agilex3 SoCFPGA board

[Dinh Nguyen]

On 11/13/25 18:59, niravkumarlaxmidas.rabara@altera.com wrote:
> From: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
> 
> Agilex3 SoCFPGA development kit is a low cost and small form factor
> development kit similar to Agilex5 013b board.
> Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference
> being the number of CPU cores — Agilex3 has 2 cores compared to 4 in
> Agilex5.
> 
> https://www.altera.com/products/devkit/a1jui000005pw9bmas/agilex-3-fpga-and-soc-c-series-development-kit
> 
> This series includes:
>   - The addition of the Agilex3 compatible in DT bindings.
>   - The initial board device tree support for the Agilex3 SoCFPGA.
> 
> Note:
> The patch 2 depends on the series: "Add iommu supports"
> https://lore.kernel.org/all/cover.1760486497.git.khairul.anuar.romli@altera.com/
> 
> Patch series "Add iommu supports" is applied to socfpga maintainer's tree
> https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19
> 

Applied!

Thanks,
Dinh