Re: [PATCH v3 1/3] dt-bindings: dma: snps,dw-axi-dmac: constrain minItems/maxItems of resets for JH7110 DMA

[Walker Chen <walker.chen@starfivetech.com>]

On 2023/2/28 23:37, Rob Herring wrote:
> On Mon, Feb 27, 2023 at 09:10:40PM +0800, Walker Chen wrote:
>> The DMA controller needs two reset items to work properly on JH7110 SoC,
>> so there is need to change the maxItems' value to 2 and add minItems
>> whose value is equal to 1. Other platforms do not have this constraint.
>> 
>> Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
>> ---
>>  .../bindings/dma/snps,dw-axi-dmac.yaml        | 25 ++++++++++++++++---
>>  1 file changed, 21 insertions(+), 4 deletions(-)
>> 
>> diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
>> index ad107a4d3b33..4ed0a6b7ca69 100644
>> --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
>> +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
>> @@ -12,14 +12,12 @@ maintainers:
>>  description:
>>    Synopsys DesignWare AXI DMA Controller DT Binding
>>  
>> -allOf:
>> -  - $ref: "dma-controller.yaml#"
>> -
>>  properties:
>>    compatible:
>>      enum:
>>        - snps,axi-dma-1.01a
>>        - intel,kmb-axi-dma
>> +      - starfive,jh7110-axi-dma
>>  
>>    reg:
>>      minItems: 1
>> @@ -58,7 +56,8 @@ properties:
>>      maximum: 8
>>  
>>    resets:
>> -    maxItems: 1
>> +    minItems: 1
>> +    maxItems: 2
>>  
>>    snps,dma-masters:
>>      description: |
>> @@ -109,6 +108,24 @@ required:
>>    - snps,priority
>>    - snps,block-size
>>  
>> +allOf:
>> +  - $ref: "dma-controller.yaml#"
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - starfive,jh7110-axi-dma
>> +    then:
>> +      properties:
>> +        resets:
>> +          minItems: 1
>> +          maxItems: 2
> 
> A given platform should not have a variable number of resets. This also 
> does nothing because you just duplicated the top-level constraints. If 
> you have 2, then you want just 'minItems: 2'.

Okay, this will be fixed.
Thank you for pointing out the problem for me.

Best regards,
Walker