Re: [PATCH v3 1/2] leds: ncp5623: Add device tree binding documentation

[Florian Vaussard <florian.vaussard-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

Hi Pavel,

Le 24. 09. 16 à 13:58, Pavel Machek a écrit :
> Hi!
> 
>> +Example
>> +=======
>> +
>> +led1: ncp5623@38 {
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>> +	compatible = "onnn,ncp5623";
>> +	reg = <0x38>;
>> +	onnn,led-iref-microamp = <10>;
>> +
>> +	led1r@0 {
>> +		label = "ncp:power:red";
>> +		linux,default-trigger = "default-on";
> ...
>> +	led1b@1 {
>> +		label = "ncp:power:blue";
>> +		reg = <1>;
> 
> Actually... the three LEDs are packaged such as this is one colorful
> light to the user, right? Some day we'll need to group them, so that
> kernel can automatically tell this is one led, and probably add extra
> attributes, such as values that produce white light.
> 

Actually, it's up to the hardware designer to choose. On my board for instance,
this chip is driving an RGB LED, but it can really drive three independent LEDs
if you want.

I agree that the RGB case is quite common nowadays and currently not very well
managed by the LED subsystem. But I do not think that this is specific to this
driver.

Best regards,
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html