From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: agross@kernel.org, robh+dt@kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, rohitkr@codeaurora.org,
srinivas.kandagatla@linaro.org,
Ajit Pandey <ajitp@codeaurora.org>,
V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Subject: Re: [PATCH] arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver
Date: Tue, 1 Dec 2020 09:22:40 +0530 [thread overview]
Message-ID: <838489a9-22df-0d1c-9b8c-30f9c35e8442@codeaurora.org> (raw)
In-Reply-To: <X8UjShseQ0F7itZe@builder.lan>
Thanks Bjorn For your comments!!!
On 11/30/2020 10:22 PM, Bjorn Andersson wrote:
> On Fri 18 Sep 09:51 CDT 2020, Srinivasa Rao Mandadapu wrote:
>
>> From: Ajit Pandey <ajitp@codeaurora.org>
>>
>> Add dai link for supporting lpass I2S driver, which is used
>> for audio capture and playback.
>> Add lpass-cpu node with pin controls and i2s primary
>> and secondary dai-links
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
>> Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
> Ajit needs to certify the origin of the patch, with his signed-off-by
> and as you are the last to touch it your signed-off-by should be last.
>
> Also, please advice on the dependencies of this patch, because the tree
> doesn't build after applying this patch.
>
> Regards,
> Bjorn
After this patch v2 patch is posted.
https://lore.kernel.org/patchwork/patch/1317796/
>> ---
>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 59 ++++++++++++++++++++++++++++
>> 1 file changed, 59 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> index bf87558..5724982 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> @@ -220,6 +220,44 @@
>> max-brightness = <1023>;
>> };
>> };
>> +
>> + sound {
>> + compatible = "qcom,sc7180-sndcard";
>> + model = "sc7180-snd-card";
>> +
>> + audio-routing =
>> + "Headphone Jack", "HPOL",
>> + "Headphone Jack", "HPOR";
>> +
>> + audio-jack = <&alc5682>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + dai-link@0 {
>> + link-name = "MultiMedia0";
>> + reg = <0>;
>> + cpu {
>> + sound-dai = <&lpass_cpu 0>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&alc5682 0>;
>> + };
>> + };
>> +
>> + dai-link@1 {
>> + link-name = "MultiMedia1";
>> + reg = <1>;
>> + cpu {
>> + sound-dai = <&lpass_cpu 1>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&max98357a>;
>> + };
>> + };
>> + };
>> };
>>
>> &qfprom {
>> @@ -725,6 +763,27 @@ hp_i2c: &i2c9 {
>> modem-init;
>> };
>>
>> +&lpass_cpu {
>> + status = "okay";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sec_mi2s_active &pri_mi2s_active &pri_mi2s_mclk_active>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + mi2s-primary@0 {
>> + reg = <MI2S_PRIMARY>;
>> + qcom,playback-sd-lines = <1>;
>> + qcom,capture-sd-lines = <0>;
>> + };
>> +
>> + mi2s-secondary@1 {
>> + reg = <MI2S_SECONDARY>;
>> + qcom,playback-sd-lines = <0>;
>> + };
>> +};
>> +
>> &mdp {
>> status = "okay";
>> };
>> --
>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
>> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>>
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
prev parent reply other threads:[~2020-12-01 3:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-18 14:51 [PATCH] arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver Srinivasa Rao Mandadapu
2020-11-30 16:52 ` Bjorn Andersson
2020-12-01 3:52 ` Srinivasa Rao Mandadapu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=838489a9-22df-0d1c-9b8c-30f9c35e8442@codeaurora.org \
--to=srivasam@codeaurora.org \
--cc=agross@kernel.org \
--cc=ajitp@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rohitkr@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=vsujithk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).