Re: [RESEND PATCH 06/12] arm64: dts: qcom: qdu1000: Supply clock from cpufreq node to CPUs

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 15.02.2023 08:03, Manivannan Sadhasivam wrote:
> Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
> to the CPU cores. But this relationship is not represented in DTS so far.
> 
> So let's make cpufreq node as the clock provider and CPU nodes as the
> consumers. The clock index for each CPU node is based on the frequency
> domain index.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index f234159d2060..98a859ad5229 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -27,6 +27,7 @@ CPU0: cpu@0 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a55";
>  			reg = <0x0 0x0>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			power-domains = <&CPU_PD0>;
>  			power-domain-names = "psci";
> @@ -45,6 +46,7 @@ CPU1: cpu@100 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a55";
>  			reg = <0x0 0x100>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			power-domains = <&CPU_PD1>;
>  			power-domain-names = "psci";
> @@ -60,6 +62,7 @@ CPU2: cpu@200 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a55";
>  			reg = <0x0 0x200>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			power-domains = <&CPU_PD2>;
>  			power-domain-names = "psci";
> @@ -75,6 +78,7 @@ CPU3: cpu@300 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a55";
>  			reg = <0x0 0x300>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			power-domains = <&CPU_PD3>;
>  			power-domain-names = "psci";
> @@ -1312,6 +1316,7 @@ cpufreq_hw: cpufreq@17d90000 {
>  			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>  			clock-names = "xo", "alternate";
>  			#freq-domain-cells = <1>;
> +			#clock-cells = <1>;
>  		};
>  
>  		gem_noc: interconnect@19100000 {