From: Andrew Lunn <andrew@lunn.ch>
To: Kaison Deng <dkx@t-chip.com.cn>
Cc: Rob Herring <robh@kernel.org>, Jimmy Hon <honyuenkwun@gmail.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>, Wayne Chou <zxf@t-chip.com.cn>,
Quentin Schulz <quentin.schulz@cherry.de>,
Dragan Simic <dsimic@manjaro.org>,
Jonas Karlman <jonas@kwiboo.se>, FUKAUMI Naoki <naoki@radxa.com>,
Peter Robinson <pbrobinson@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
Date: Mon, 15 Sep 2025 05:01:56 +0200 [thread overview]
Message-ID: <83b50c2a-bcbc-45cc-935b-af3bc910853c@lunn.ch> (raw)
In-Reply-To: <349c4226824efa52ceb14e3d8518c8bb5c7465fc.1757902513.git.dkx@t-chip.com.cn>
> +&gmac0 {
> + clock_in_out = "output";
> + phy-handle = <&rgmii_phy0>;
> + phy-mode = "rgmii-id";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gmac0_miim
> + &gmac0_tx_bus2
> + &gmac0_rx_bus2
> + &gmac0_rgmii_clk
> + &gmac0_rgmii_bus>;
> + status = "okay";
> +};
> +
> +&gmac1 {
> + clock_in_out = "output";
> + phy-handle = <&rgmii_phy1>;
> + phy-mode = "rgmii-id";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gmac1_miim
> + &gmac1_tx_bus2
> + &gmac1_rx_bus2
> + &gmac1_rgmii_clk
> + &gmac1_rgmii_bus>;
> + status = "okay";
> +};
> +&mdio0 {
> + rgmii_phy0: ethernet-phy@1 {
> + compatible = "ethernet-phy-id001c.c916";
> + reg = <0x1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rtl8211f_0_rst>;
> + reset-assert-us = <20000>;
> + reset-deassert-us = <100000>;
> + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&mdio1 {
> + rgmii_phy1: ethernet-phy@1 {
> + compatible = "ethernet-phy-id001c.c916";
> + reg = <0x1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rtl8211f_1_rst>;
> + reset-assert-us = <20000>;
> + reset-deassert-us = <100000>;
> + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + };
> +};
For these nodes only:
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
next prev parent reply other threads:[~2025-09-15 3:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-15 2:22 [PATCH v3 0/2] Add support for Firefly ROC-RK3588-RT Kaison Deng
2025-09-15 2:22 ` [PATCH v3 1/2] dt-bindings: arm: rockchip: Add " Kaison Deng
2025-09-15 13:54 ` Rob Herring (Arm)
2025-09-16 3:28 ` Kaison Deng
2025-09-16 7:34 ` Heiko Stübner
2025-09-15 2:22 ` [PATCH v3 2/2] arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT Kaison Deng
2025-09-15 3:01 ` Andrew Lunn [this message]
2025-09-18 21:09 ` [PATCH v3 0/2] Add support for Firefly ROC-RK3588-RT Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=83b50c2a-bcbc-45cc-935b-af3bc910853c@lunn.ch \
--to=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dkx@t-chip.com.cn \
--cc=dsimic@manjaro.org \
--cc=heiko@sntech.de \
--cc=honyuenkwun@gmail.com \
--cc=jonas@kwiboo.se \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=naoki@radxa.com \
--cc=pbrobinson@gmail.com \
--cc=quentin.schulz@cherry.de \
--cc=robh@kernel.org \
--cc=zxf@t-chip.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox