Re: [RESEND PATCH 11/12] arm64: dts: qcom: sm6375: Supply clock from cpufreq node to CPUs

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 15.02.2023 08:03, Manivannan Sadhasivam wrote:
> Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
> to the CPU cores. But this relationship is not represented in DTS so far.
> 
> So let's make cpufreq node as the clock provider and CPU nodes as the
> consumers. The clock index for each CPU node is based on the frequency
> domain index.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6375.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
> index 31b88c738510..58d3b4785401 100644
> --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
> @@ -39,6 +39,7 @@ CPU0: cpu@0 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo660";
>  			reg = <0x0 0x0>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_0>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -58,6 +59,7 @@ CPU1: cpu@100 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo660";
>  			reg = <0x0 0x100>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_100>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -74,6 +76,7 @@ CPU2: cpu@200 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo660";
>  			reg = <0x0 0x200>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_200>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -90,6 +93,7 @@ CPU3: cpu@300 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo660";
>  			reg = <0x0 0x300>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_300>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -106,6 +110,7 @@ CPU4: cpu@400 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo660";
>  			reg = <0x0 0x400>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_400>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -122,6 +127,7 @@ CPU5: cpu@500 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo660";
>  			reg = <0x0 0x500>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_500>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -139,6 +145,7 @@ CPU6: cpu@600 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo660";
>  			reg = <0x0 0x600>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_600>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
> @@ -155,6 +162,7 @@ CPU7: cpu@700 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo660";
>  			reg = <0x0 0x700>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_700>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
> @@ -1383,6 +1391,7 @@ cpufreq_hw: cpufreq@fd91000 {
>  				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
>  			#freq-domain-cells = <1>;
> +			#clock-cells = <1>;
>  		};
>  	};
>