From: E Shattow <e@freeshell.de>
To: Yixun Lan <dlan@kernel.org>,
"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
"Martin K. Petersen" <mkp@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@sandisk.com>,
Bart Van Assche <bvanassche@acm.org>,
Bean Huo <beanhuo@micron.com>,
Stanley Jhu <stanleyjhu@google.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>
Cc: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>,
Aurelien Jarno <aurelien@aurel32.net>,
Jennifer Berringer <jberring@redhat.com>,
Trevor Gamblin <tgamblin@baylibre.com>,
linux-scsi@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v8 0/2] Add UFS Host driver support for SpacemiT K3 SoC
Date: Mon, 16 Nov 2026 17:15:08 -0800 [thread overview]
Message-ID: <8462a0d9-e9b7-467d-b2e1-7870c78e2691@freeshell.de> (raw)
In-Reply-To: <20261116-08-k3-ufs-support-v8-0-e3b256972dd4@kernel.org>
Hi Yixun,
On 11/15/26 19:46, Yixun Lan wrote:
> This series try to add UFS support for SpacemiT K3 SoC, the controller
> components consists of System Bus Interface Unit, UFS Host Controller
> Interface, UFS Transport Protocol Layer, UFS Host Registers, Device
> Management Entity (DME), Transport Layer, Network Layer, Data Link
> Layer, PHY Adapter Layer, and M-PHY Interface. A more detail functional
> block diagram can be found in SpacemiT website, chapter 9.7.3 [1]
>
> The DTS patch has been dropped in this series [2], and will send
> in separate series once this patch accepted. For people who want to
> test UFS driver, please grab the DT patch from version v5 [3].
>
> Enable UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND,
> This allows the device auto-bkops to be always enabled except
> during suspend (both runtime and suspend), with this feature,
> the BKOPS interrupt (log below) isn't reported anymore.
>
> [ 806.710763] ufshcd-spacemit c0e00000.ufshc: ufshcd_bkops_exception_event_handler: device raised urgent BKOPS exception for bkops status 1
>
> Link: https://spacemit.com/community/document/info?nodepath=hardware/key_stone/k3/k3_docs/k3_usermanual/09_memory_storage.md&lang=en [1]
> Link: https://lore.kernel.org/all/20260918-belligerent-succinct-kraken-7fa592@quoll/ [2]
> Link: https://lore.kernel.org/all/20260916-08-k3-ufs-support-v5-3-1f5d71f1027d@kernel.org/ [3]
> Signed-off-by: Yixun Lan <dlan@kernel.org>
> ---
> Changes in v8:
> - enable UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND
> - rename to "ref_clk", see explanation in patch
> - add delay between enable clk & deassert reset
> - respect bRefClkGatingWaitTime, add wait delay
> - drop comment of ufs_hba_spacemit_vops, which got CI complaint
> - rebase to v7.4-rc1
> - Link to v7: https://patch.msgid.link/20261002-08-k3-ufs-support-v7-0-bb39007ff9ae@kernel.org
>
> Changes in v7:
> - check err return value of ufs_spacemit_quirk_host_pa_saveconfigtime()
> - Link to v6: https://patch.msgid.link/20260921-08-k3-ufs-support-v6-0-3479768a2299@kernel.org
>
> Changes in v6:
> - drop unused macro and dev_req_params
> - use global PX_xx macros
> - fix axi clock name
> - drop dts patch
> - collect tags
> - Link to v5: https://patch.msgid.link/20260916-08-k3-ufs-support-v5-0-1f5d71f1027d@kernel.org
>
> Changes in v5:
> - adjust clock names
> - add runtime power support
> - collect tags
> - Link to v4: https://patch.msgid.link/20260908-08-k3-ufs-support-v4-0-22aa2bd97d3b@kernel.org
>
> Changes in v4:
> - fix clock and reset settings
> - drop function which retrieve value of tx_lanes
> - propagate return error of ufs_spacemit_dme_set()
> - check return value ufs_spacemit_check_hibern8()
> - drop call to ufshcd_vops_phy_initialization()
> - handle compiling warning if CONFIG_OF not enabled
> add __maybe_unused to ufs_spacemit_of_match
> - Link to v3: https://patch.msgid.link/20260806-08-k3-ufs-support-v3-0-037fb322acdb@kernel.org
>
> Changes in v3:
> - collect tags
> - fix dt-binding warning reported-by sashiko
> - fix low freq in opp-2 table
> - fix err checking in check_hibern8()
> - propagate err code in link_startup_notify()
> - update documents for event_notify()
> - ufs clock driver is merged into v7.3-rc1, update cover letter
> - Link to v2: https://patch.msgid.link/20260725-08-k3-ufs-support-v2-0-45036a2a2418@kernel.org
>
> Changes in v2:
> - fix missing interrupts property
> - move ufs node to k3-com260.dtsi
> - convert freq-table-hz to operating-points-v2
> - rework reset_control, fix header and drop global variable
> - drop dump_host_regs() debug interface
> - converge and refactor dme_set() operations
> - massive reduce of busy delay() loops
> - drop vendor specific hce_enable_notify(), fallback to default
> - drop unused member from struct ufs_spacemit_host
> - add COMPILE_TEST support to Kconfig
> - comment style fix
> - Link to v1: https://patch.msgid.link/20260702-08-k3-ufs-support-v1-0-1a64a3ab128f@kernel.org
>
> ---
> Yixun Lan (2):
> scsi: ufs: spacemit: dt-bindings: Add UFS controller for K3 SoC
> scsi: ufs: spacemit: k3: Add UFS Host Controller driver
>
> .../devicetree/bindings/ufs/spacemit,k3-ufshc.yaml | 56 ++
> drivers/ufs/host/Kconfig | 12 +
> drivers/ufs/host/Makefile | 1 +
> drivers/ufs/host/ufs-spacemit.c | 655 +++++++++++++++++++++
> drivers/ufs/host/ufs-spacemit.h | 77 +++
> 5 files changed, 801 insertions(+)
> ---
> base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
> change-id: 20260605-08-k3-ufs-support-c8b308e415e2
>
> Best regards,
> --
> Yixun Lan <dlan@kernel.org>
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Tested v7 and v8 successfully on Sipeed K3 Pico-ITX (32GiB DRAM / 128GiB
UFS model). Build and test methodology:
### build chimera debian-installer with patched mainline kernel
### assume fresh Debian testing "forky" build environment
apt update
apt install -y b4 bc bison ca-certificates cpio \
crossbuild-essential-riscv64 curl debhelper fakeroot flex kmod \
libdw-dev libssl-dev libssl-dev:riscv64 linux-config-7.2:riscv64 \
python3 rsync
curl -L \
https://git.kernel.org/torvalds/t/linux-7.4-rc3.tar.gz \
| tar xz
pushd linux-7.4-rc3
b4 am -v1 -o- \
https://lore.kernel.org/all/20261115195112.32120-1-e@freeshell.de/ \
| patch -p1
b4 am -v5 -P3 -o- \
https://lore.kernel.org/all/20260916-08-k3-ufs-support-v5-0-1f5d71f1027d@kernel.org/ \
| patch -p1
b4 am -v8 -P1,2 -o- \
https://lore.kernel.org/linux-riscv/20261116-08-k3-ufs-support-v8-0-e3b256972dd4@kernel.org/ \
| patch -p1
xzcat /usr/src/linux-config-7.2/config.riscv64_none_riscv64.xz \
> .config
scripts/config \
--module SCSI_UFS_SPACEMIT \
--module SCSI_UFSHCD_PLATFORM \
--module CONFIG_PHY_SPACEMIT_K3_COMBO_PHY \
--enable DEBUG_INFO_NONE \
--undefine CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
make ARCH=riscv olddefconfig
make ARCH=riscv KDEB_CHANGELOG_DIST=unreleased LOCALVERSION=-k3ufs \
-j$(nproc) bindeb-pkg
popd
curl -L \
https://d-i.debian.org/daily-images/riscv64/daily/netboot/netboot.tar.gz \
| tar xz ./debian-installer
fakeroot # enter fakeroot environment to preserve initrd permissions
gzip -dc debian-installer/riscv64/initrd.gz \
| cpio -id --directory=initrd
dpkg -x linux-image-*k3ufs*_riscv64.deb initrd/custom
gzip -dc initrd/custom/boot/vmlinuz-* \
> debian-installer/riscv64/linux-custom
mv initrd/lib/modules initrd/custom/
mv initrd/custom/lib/modules initrd/lib/
mv initrd/custom/usr/lib/* debian-installer/device-tree-custom
find initrd -path initrd/custom -prune -o -printf '%P\0' \
| cpio -0oH newc --directory=initrd \
| gzip -c > debian-installer/riscv64/initrd-custom.gz
exit # leave fakeroot environment
pushd debian-installer
tar -czf ../debian-installer-k3ufs.tar.gz \
--transform 's~^~debian-installer-k3ufs/~' \
device-tree-custom \
riscv64/linux-custom \
riscv64/initrd-custom.gz \
../linux-image-*k3ufs*_riscv64.deb
popd
### end (build chimera debian-installer with patched mainline kernel)
Then follow mainline U-Boot/OpenSBI build guide at:
https://lore.kernel.org/u-boot/20261029001555.1890775-1-e@freeshell.de/
with "python3 -m http.server 8000" to serve the files:
u-boot> env set autoload no
u-boot> dhcp
u-boot> wget $kernel_addr_r http://host:8000/riscv64/linux-custom
u-boot> wget $fdt_addr_r
http://host:8000/device-tree-custom/spacemit/k3-pico-itx.dtb
u-boot> wget $ramdisk_addr_r http://host:8000/riscv64/initrd-custom.gz
u-boot> env set bootargs 'console=ttyS0,115200 debug rootwait earlycon=sbi'
u-boot> bootefi $kernel_addr_r $ramdisk_addr_r:$filesize $fdt_addr_r
before the very last step of debian-installer to reboot, go to console
screen and use chroot to install the patched kernel to target and copy
out the necessary files
for i in /dev /dev/pts /proc /run /sys /tmp ; do mount -o bind $i
/target$i ; done
chroot /target sh -c 'scp
user@host:/path/to/debian-installer-k3ufs/linux-image-*k3ufs*.deb /tmp'
chroot /target sh -c 'dpkg -i /tmp/linux-image-*k3ufs*.deb'
chroot /target sh -c 'scp /boot/initrd.img-*k3ufs
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp /boot/vmlinuz-*k3ufs
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp
/lib/linux-image-*k3ufs/spacemit/k3-pico-itx.dtb
user@host:/path/to/installed-debiank3'
chroot /target sh -c 'scp /boot/grub/grub.cfg
user@host:/path/to/installed-debiank3'
for i in /dev/pts /dev /proc /run /sys /tmp ; do umount /target$i ; done
... over network to some host later used to serve the bootloader these
files via "python -m http.server 8000"
u-boot> env set autoload no
u-boot> dhcp
u-boot> wget $kernel_addr_r http://host:8000/vmlinux-7.4.0-rc3-k3ufs
u-boot> wget $fdt_addr_r http://host:8000/k3-pico-itx.dtb
u-boot> wget $ramdisk_addr_r http://host:8000/initrd.img-7.4.0-rc3-k3ufs
u-boot> env set bootargs 'root=UUID=<place UUID here from grub.cfg> ro
quiet'
u-boot> bootefi $kernel_addr_r $ramdisk_addr_r:$filesize $fdt_addr_r
Workload for testing is to repeat the above build steps on-device from
UFS-backed root filesystem. In v7 there would be the occasional BKOPS
warnings, and v8 here now no such BKOPS warnings.
I do notice some UFS-related warnings and errors in dmesg:
journalctl --dmesg | grep ufshcd
ufshcd-spacemit c0e00000.ufshc: freq-table-hz property not specified
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vdd-hba-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vcc-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vccq-supply regulator, assuming enabled
ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
vccq2-supply regulator, assuming enabled
scsi host0: ufshcd
ufshcd-spacemit c0e00000.ufshc: ufshcd_scsi_add_wlus: BOOT WLUN not found
ufshcd-spacemit c0e00000.ufshc: DL error event, INT errors:0x4,
DL_ERR:0x80000020
-E
prev parent reply other threads:[~2026-11-17 1:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 3:46 [PATCH v8 0/2] Add UFS Host driver support for SpacemiT K3 SoC Yixun Lan
2026-11-16 3:46 ` [PATCH v8 1/2] scsi: ufs: spacemit: dt-bindings: Add UFS controller for " Yixun Lan
2026-11-16 3:46 ` [PATCH v8 2/2] scsi: ufs: spacemit: k3: Add UFS Host Controller driver Yixun Lan
2026-11-16 4:16 ` sashiko-bot
2026-11-17 1:15 ` E Shattow [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8462a0d9-e9b7-467d-b2e1-7870c78e2691@freeshell.de \
--to=e@freeshell.de \
--cc=James.Bottomley@HansenPartnership.com \
--cc=alex@ghiti.fr \
--cc=alim.akhtar@samsung.com \
--cc=aou@eecs.berkeley.edu \
--cc=asrinivasan@oss.tenstorrent.com \
--cc=aurelien@aurel32.net \
--cc=avri.altman@sandisk.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@kernel.org \
--cc=jberring@redhat.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mkp@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=robh@kernel.org \
--cc=spacemit@lists.linux.dev \
--cc=stanleyjhu@google.com \
--cc=tgamblin@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox