devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Nuno Sá" <noname.nuno@gmail.com>
To: Antoniu Miclaus <antoniu.miclaus@analog.com>,
	jic23@kernel.org,  robh@kernel.org, conor+dt@kernel.org,
	linux-iio@vger.kernel.org,  devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,  linux-pwm@vger.kernel.org
Cc: David Lechner <dlechner@baylibre.com>
Subject: Re: [PATCH v10 4/8] iio: adc: adi-axi-adc: add interface type
Date: Fri, 17 Jan 2025 16:18:01 +0000	[thread overview]
Message-ID: <847596a107c6ab0370d69a16deb3d9dfc6c04074.camel@gmail.com> (raw)
In-Reply-To: <20250117130702.22588-5-antoniu.miclaus@analog.com>

On Fri, 2025-01-17 at 15:06 +0200, Antoniu Miclaus wrote:
> Add support for getting the interface (CMOS or LVDS) used by the AXI ADC
> IP.
> 
> Reviewed-by: David Lechner <dlechner@baylibre.com>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---

Reviewed-by: Nuno Sa <nuno.sa@analog.com>

> no changes in v10.
>  drivers/iio/adc/adi-axi-adc.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
> index c7357601f0f8..d2e1dc63775c 100644
> --- a/drivers/iio/adc/adi-axi-adc.c
> +++ b/drivers/iio/adc/adi-axi-adc.c
> @@ -39,6 +39,9 @@
>  #define   ADI_AXI_REG_RSTN_MMCM_RSTN		BIT(1)
>  #define   ADI_AXI_REG_RSTN_RSTN			BIT(0)
>  
> +#define ADI_AXI_ADC_REG_CONFIG			0x000c
> +#define   ADI_AXI_ADC_REG_CONFIG_CMOS_OR_LVDS_N	BIT(7)
> +
>  #define ADI_AXI_ADC_REG_CTRL			0x0044
>  #define    ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK	BIT(1)
>  
> @@ -290,6 +293,25 @@ static int axi_adc_chan_disable(struct iio_backend *back,
> unsigned int chan)
>  				 ADI_AXI_REG_CHAN_CTRL_ENABLE);
>  }
>  
> +static int axi_adc_interface_type_get(struct iio_backend *back,
> +				      enum iio_backend_interface_type *type)
> +{
> +	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = regmap_read(st->regmap, ADI_AXI_ADC_REG_CONFIG, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val & ADI_AXI_ADC_REG_CONFIG_CMOS_OR_LVDS_N)
> +		*type = IIO_BACKEND_INTERFACE_SERIAL_CMOS;
> +	else
> +		*type = IIO_BACKEND_INTERFACE_SERIAL_LVDS;
> +
> +	return 0;
> +}
> +
>  static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
>  						 struct iio_dev *indio_dev)
>  {
> @@ -337,6 +359,7 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
>  	.iodelay_set = axi_adc_iodelays_set,
>  	.test_pattern_set = axi_adc_test_pattern_set,
>  	.chan_status = axi_adc_chan_status,
> +	.interface_type_get = axi_adc_interface_type_get,
>  	.debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
>  	.debugfs_print_chan_status =
> iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
>  };


  reply	other threads:[~2025-01-17 16:18 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-17 13:06 [PATCH v10 0/8] Add support for AD485x DAS Family Antoniu Miclaus
2025-01-17 13:06 ` [PATCH v10 1/8] iio: backend: add API for interface get Antoniu Miclaus
2025-01-17 16:08   ` Nuno Sá
2025-01-17 13:06 ` [PATCH v10 2/8] iio: backend: add support for data size set Antoniu Miclaus
2025-01-17 16:09   ` Nuno Sá
2025-01-17 13:06 ` [PATCH v10 3/8] iio: backend: add API for oversampling Antoniu Miclaus
2025-01-17 16:17   ` Nuno Sá
2025-01-18 16:42     ` Jonathan Cameron
2025-01-17 13:06 ` [PATCH v10 4/8] iio: adc: adi-axi-adc: add interface type Antoniu Miclaus
2025-01-17 16:18   ` Nuno Sá [this message]
2025-01-17 13:06 ` [PATCH v10 5/8] iio: adc: adi-axi-adc: set data format Antoniu Miclaus
2025-01-17 16:20   ` Nuno Sá
2025-01-17 17:50     ` David Lechner
2025-01-18 14:47       ` Nuno Sá
2025-01-17 13:07 ` [PATCH v10 6/8] iio: adc: adi-axi-adc: add oversampling Antoniu Miclaus
2025-01-17 16:22   ` Nuno Sá
2025-01-17 13:07 ` [PATCH v10 7/8] dt-bindings: iio: adc: add ad4851 Antoniu Miclaus
2025-01-17 13:07 ` [PATCH v10 8/8] iio: adc: ad4851: add ad485x driver Antoniu Miclaus
2025-01-17 21:45   ` David Lechner
2025-01-18 16:57     ` Jonathan Cameron
2025-01-18 17:09       ` David Lechner
2025-01-18 17:41         ` Jonathan Cameron
2025-01-20 12:37     ` Miclaus, Antoniu
2025-01-20 17:37       ` David Lechner
2025-01-21 10:24         ` Nuno Sá
2025-01-18 15:10   ` Nuno Sá
2025-01-18 17:37     ` David Lechner
2025-01-20  9:44       ` Nuno Sá

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=847596a107c6ab0370d69a16deb3d9dfc6c04074.camel@gmail.com \
    --to=noname.nuno@gmail.com \
    --cc=antoniu.miclaus@analog.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).