devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sivaprakash Murugesan <sivaprak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V7 0/4] Add APSS clock controller support for IPQ6018
Date: Thu, 18 Jun 2020 12:30:58 +0530	[thread overview]
Message-ID: <852c7804-b1b3-2d78-00f6-b67b9fd4e720@codeaurora.org> (raw)
In-Reply-To: <1591440907-20021-1-git-send-email-sivaprak@codeaurora.org>

Ping!

Hi Stephen,

Is it possible for you to review this series? We have regulators and few 
other patches

depend on this patch, it would be great if you could provide your inputs 
on this.

Thanks,

Siva

On 6/6/2020 4:25 PM, Sivaprakash Murugesan wrote:
> The CPU on Qualcomm's IPQ6018 devices are primarily fed by APSS PLL and XO,
> these are connected to a clock mux and enable block.
>
> This patch series adds support for these clocks and inturn enables clocks
> required for CPU freq.
>
> [V7]
>   * Removed dts patch from this series, will send that separately
>   * Addressed Rob's minor comment on the binding
>   * Patch 1 depends on a53 pll bindings
>     https://lkml.org/lkml/2020/5/4/60
> [V6]
>   * Split mailbox driver from this series, mailbox changes will sent as a
>     separate series
>   * Addressed review comments from Stephen
> [V5]
>   * Addressed Bjorn comments on apss clk and dt-bindings
>   * Patch 2 depends on a53 pll dt-bindings
>     https://www.spinics.net/lists/linux-clk/msg48358.html
> [V4]
>   * Re-written PLL found on IPQ platforms as a separate driver
>   * Addressed stephen's comments on apss clock controller and pll
>   * Addressed Rob's review comments on bindings
>   * moved a53 pll binding from this series as it is not applicable, will send
>     it separately.
> [V3]
>   * Fixed dt binding check error in patch2
>     dt-bindings: clock: Add YAML schemas for QCOM A53 PLL
> [V2]
>   * Restructred the patch series as there are two different HW blocks,
>     the mux and enable belongs to the apcs block and PLL has a separate HW
>     block.
>   * Converted qcom mailbox and qcom a53 pll documentation to yaml.
>   * Addressed review comments from Stephen, Rob and Sibi where it is applicable.
>   * Changed this cover letter to state the purpose of this patch series
>
> Sivaprakash Murugesan (4):
>    dt-bindings: clock: add ipq6018 a53 pll compatible
>    clk: qcom: Add ipq apss pll driver
>    clk: qcom: Add DT bindings for ipq6018 apss clock controller
>    clk: qcom: Add ipq6018 apss clock controller
>
>   .../devicetree/bindings/clock/qcom,a53pll.yaml     |  18 ++++
>   drivers/clk/qcom/Kconfig                           |  19 ++++
>   drivers/clk/qcom/Makefile                          |   2 +
>   drivers/clk/qcom/apss-ipq-pll.c                    |  95 ++++++++++++++++++
>   drivers/clk/qcom/apss-ipq6018.c                    | 106 +++++++++++++++++++++
>   include/dt-bindings/clock/qcom,apss-ipq.h          |  12 +++
>   6 files changed, 252 insertions(+)
>   create mode 100644 drivers/clk/qcom/apss-ipq-pll.c
>   create mode 100644 drivers/clk/qcom/apss-ipq6018.c
>   create mode 100644 include/dt-bindings/clock/qcom,apss-ipq.h
>

  parent reply	other threads:[~2020-06-18  7:01 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-06 10:55 [PATCH V7 0/4] Add APSS clock controller support for IPQ6018 Sivaprakash Murugesan
2020-06-06 10:55 ` [PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible Sivaprakash Murugesan
2020-06-15 17:59   ` Rob Herring
2020-06-20  0:36   ` Stephen Boyd
2020-06-20  1:06     ` Sivaprakash Murugesan
2020-06-06 10:55 ` [PATCH V7 2/4] clk: qcom: Add ipq apss pll driver Sivaprakash Murugesan
2020-06-06 10:55 ` [PATCH V7 3/4] clk: qcom: Add DT bindings for ipq6018 apss clock controller Sivaprakash Murugesan
2020-06-09 19:47   ` Rob Herring
2020-06-20  2:26   ` Stephen Boyd
2020-06-06 10:55 ` [PATCH V7 4/4] clk: qcom: Add " Sivaprakash Murugesan
2020-06-18  7:00 ` Sivaprakash Murugesan [this message]
2020-06-20  0:31   ` [PATCH V7 0/4] Add APSS clock controller support for IPQ6018 Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=852c7804-b1b3-2d78-00f6-b67b9fd4e720@codeaurora.org \
    --to=sivaprak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).