* [PATCH 0/3] usb: dwc3: Introduce refclk lpm @ 2018-11-03 1:35 Thinh Nguyen 2018-11-03 1:35 ` [PATCH 1/3] usb: dwc3: Add reference clock properties Thinh Nguyen 0 siblings, 1 reply; 12+ messages in thread From: Thinh Nguyen @ 2018-11-03 1:35 UTC (permalink / raw) To: Felipe Balbi, linux-usb, devicetree, Rob Herring, Mark Rutland; +Cc: John Youn This patch series introduce a new feature in DWC_usb31 with more aggressive low power management using reference clock. Thinh Nguyen (3): usb: dwc3: Add reference clock properties usb: dwc3: Set reference clock period usb: dwc3: Enable low power management using refclk Documentation/devicetree/bindings/usb/dwc3.txt | 18 ++++++++++++++ drivers/usb/dwc3/core.c | 34 ++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 14 +++++++++++ 3 files changed, 66 insertions(+) -- 2.11.0 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-03 1:35 [PATCH 0/3] usb: dwc3: Introduce refclk lpm Thinh Nguyen @ 2018-11-03 1:35 ` Thinh Nguyen 2018-11-06 11:26 ` Felipe Balbi 0 siblings, 1 reply; 12+ messages in thread From: Thinh Nguyen @ 2018-11-03 1:35 UTC (permalink / raw) To: Felipe Balbi, linux-usb, devicetree, Rob Herring, Mark Rutland; +Cc: John Youn Add two new device properties to program the reference clock period and to enable low power management using the reference clock. This allows a higher demand to go in low power for Audio Device Class devices. This feature is currently only valid for DWC_usb31 peripheral controller v1.80a and higher. Set "snps,refclk-period-ns" to program the reference clock period. The valid input periods are as follow: +-------------+-----------------+ | Period (ns) | Freq (MHz) | +-------------+-----------------+ | 25 | 39.7/40 | | 41 | 24.4 | | 50 | 20 | | 52 | 19.2 | | 58 | 17.2 | | 62 | 16.1 | +-------------+-----------------+ Set "snps,refclk-lpm" to enable low power scheduling of isochronous transfers by running SOF/ITP counters using the reference clock. Both "snps,dis_u2_susphy_quirk" and "snps,dis_enblslpm_quirk" must not be set for this feature to be enabled. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> --- Documentation/devicetree/bindings/usb/dwc3.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 636630fb92d7..712b344c3a31 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -95,6 +95,24 @@ Optional properties: this and tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 programming guide section 1.2.3) to enable periodic ESS TX threshold. + - snps,refclk-period-ns: set to program the reference clock period. The valid + input periods are as follow: + +-------------+-----------------+ + | Period (ns) | Freq (MHz) | + +-------------+-----------------+ + | 25 | 39.7/40 | + | 41 | 24.4 | + | 50 | 20 | + | 52 | 19.2 | + | 58 | 17.2 | + | 62 | 16.1 | + +-------------+-----------------+ + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous + transfers by running SOF/ITP counters using the + reference clock. Only valid for DWC_usb31 peripheral + controller v1.80a and higher. Both + "snps,dis_u2_susphy_quirk" and + "snps,dis_enblslpm_quirk" must not be set. - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 -- 2.11.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-03 1:35 ` [PATCH 1/3] usb: dwc3: Add reference clock properties Thinh Nguyen @ 2018-11-06 11:26 ` Felipe Balbi 2018-11-07 4:11 ` Thinh Nguyen 0 siblings, 1 reply; 12+ messages in thread From: Felipe Balbi @ 2018-11-06 11:26 UTC (permalink / raw) To: Thinh Nguyen, linux-usb, devicetree, Rob Herring, Mark Rutland; +Cc: John Youn [-- Attachment #1: Type: text/plain, Size: 2776 bytes --] hi, Thinh Nguyen <thinh.nguyen@synopsys.com> writes: > Add two new device properties to program the reference clock period and > to enable low power management using the reference clock. This allows a > higher demand to go in low power for Audio Device Class devices. This > feature is currently only valid for DWC_usb31 peripheral controller > v1.80a and higher. > > Set "snps,refclk-period-ns" to program the reference clock period. The > valid input periods are as follow: > +-------------+-----------------+ > | Period (ns) | Freq (MHz) | > +-------------+-----------------+ > | 25 | 39.7/40 | > | 41 | 24.4 | > | 50 | 20 | > | 52 | 19.2 | > | 58 | 17.2 | > | 62 | 16.1 | > +-------------+-----------------+ > > Set "snps,refclk-lpm" to enable low power scheduling of isochronous > transfers by running SOF/ITP counters using the reference clock. Both > "snps,dis_u2_susphy_quirk" and "snps,dis_enblslpm_quirk" must not be > set for this feature to be enabled. > > Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> > --- > Documentation/devicetree/bindings/usb/dwc3.txt | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > index 636630fb92d7..712b344c3a31 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -95,6 +95,24 @@ Optional properties: > this and tx-thr-num-pkt-prd to a valid, non-zero value > 1-16 (DWC_usb31 programming guide section 1.2.3) to > enable periodic ESS TX threshold. > + - snps,refclk-period-ns: set to program the reference clock period. The valid > + input periods are as follow: > + +-------------+-----------------+ > + | Period (ns) | Freq (MHz) | > + +-------------+-----------------+ > + | 25 | 39.7/40 | > + | 41 | 24.4 | > + | 50 | 20 | > + | 52 | 19.2 | > + | 58 | 17.2 | > + | 62 | 16.1 | > + +-------------+-----------------+ > + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous > + transfers by running SOF/ITP counters using the > + reference clock. Only valid for DWC_usb31 peripheral > + controller v1.80a and higher. Both > + "snps,dis_u2_susphy_quirk" and > + "snps,dis_enblslpm_quirk" must not be set. sounds like you should rely on clk API here. Then on driver call clk_get_rate() to computer whatever you need to compute. -- balbi [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-06 11:26 ` Felipe Balbi @ 2018-11-07 4:11 ` Thinh Nguyen 2018-11-07 6:37 ` Felipe Balbi 0 siblings, 1 reply; 12+ messages in thread From: Thinh Nguyen @ 2018-11-07 4:11 UTC (permalink / raw) To: Felipe Balbi, Thinh Nguyen, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring, Mark Rutland Cc: John Youn Hi Felipe, On 11/6/2018 3:26 AM, Felipe Balbi wrote: > hi, > > Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >> Add two new device properties to program the reference clock period and >> to enable low power management using the reference clock. This allows a >> higher demand to go in low power for Audio Device Class devices. This >> feature is currently only valid for DWC_usb31 peripheral controller >> v1.80a and higher. >> >> Set "snps,refclk-period-ns" to program the reference clock period. The >> valid input periods are as follow: >> +-------------+-----------------+ >> | Period (ns) | Freq (MHz) | >> +-------------+-----------------+ >> | 25 | 39.7/40 | >> | 41 | 24.4 | >> | 50 | 20 | >> | 52 | 19.2 | >> | 58 | 17.2 | >> | 62 | 16.1 | >> +-------------+-----------------+ >> >> Set "snps,refclk-lpm" to enable low power scheduling of isochronous >> transfers by running SOF/ITP counters using the reference clock. Both >> "snps,dis_u2_susphy_quirk" and "snps,dis_enblslpm_quirk" must not be >> set for this feature to be enabled. >> >> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> >> --- >> Documentation/devicetree/bindings/usb/dwc3.txt | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >> index 636630fb92d7..712b344c3a31 100644 >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >> @@ -95,6 +95,24 @@ Optional properties: >> this and tx-thr-num-pkt-prd to a valid, non-zero value >> 1-16 (DWC_usb31 programming guide section 1.2.3) to >> enable periodic ESS TX threshold. >> + - snps,refclk-period-ns: set to program the reference clock period. The valid >> + input periods are as follow: >> + +-------------+-----------------+ >> + | Period (ns) | Freq (MHz) | >> + +-------------+-----------------+ >> + | 25 | 39.7/40 | >> + | 41 | 24.4 | >> + | 50 | 20 | >> + | 52 | 19.2 | >> + | 58 | 17.2 | >> + | 62 | 16.1 | >> + +-------------+-----------------+ >> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >> + transfers by running SOF/ITP counters using the >> + reference clock. Only valid for DWC_usb31 peripheral >> + controller v1.80a and higher. Both >> + "snps,dis_u2_susphy_quirk" and >> + "snps,dis_enblslpm_quirk" must not be set. > sounds like you should rely on clk API here. Then on driver call > clk_get_rate() to computer whatever you need to compute. > There's nothing to compute here. We can simply enable this feature with "snps, enable-refclk-lpm" and the controller will use the default refclk settings. Thinh ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-07 4:11 ` Thinh Nguyen @ 2018-11-07 6:37 ` Felipe Balbi 2018-11-07 22:49 ` Thinh Nguyen 0 siblings, 1 reply; 12+ messages in thread From: Felipe Balbi @ 2018-11-07 6:37 UTC (permalink / raw) To: Thinh Nguyen; +Cc: John Youn [-- Attachment #1: Type: text/plain, Size: 3626 bytes --] Hi, Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >> Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>> Add two new device properties to program the reference clock period and >>> to enable low power management using the reference clock. This allows a >>> higher demand to go in low power for Audio Device Class devices. This >>> feature is currently only valid for DWC_usb31 peripheral controller >>> v1.80a and higher. >>> >>> Set "snps,refclk-period-ns" to program the reference clock period. The >>> valid input periods are as follow: >>> +-------------+-----------------+ >>> | Period (ns) | Freq (MHz) | >>> +-------------+-----------------+ >>> | 25 | 39.7/40 | >>> | 41 | 24.4 | >>> | 50 | 20 | >>> | 52 | 19.2 | >>> | 58 | 17.2 | >>> | 62 | 16.1 | >>> +-------------+-----------------+ >>> >>> Set "snps,refclk-lpm" to enable low power scheduling of isochronous >>> transfers by running SOF/ITP counters using the reference clock. Both >>> "snps,dis_u2_susphy_quirk" and "snps,dis_enblslpm_quirk" must not be >>> set for this feature to be enabled. >>> >>> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> >>> --- >>> Documentation/devicetree/bindings/usb/dwc3.txt | 18 ++++++++++++++++++ >>> 1 file changed, 18 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>> index 636630fb92d7..712b344c3a31 100644 >>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>> @@ -95,6 +95,24 @@ Optional properties: >>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>> enable periodic ESS TX threshold. >>> + - snps,refclk-period-ns: set to program the reference clock period. The valid >>> + input periods are as follow: >>> + +-------------+-----------------+ >>> + | Period (ns) | Freq (MHz) | >>> + +-------------+-----------------+ >>> + | 25 | 39.7/40 | >>> + | 41 | 24.4 | >>> + | 50 | 20 | >>> + | 52 | 19.2 | >>> + | 58 | 17.2 | >>> + | 62 | 16.1 | >>> + +-------------+-----------------+ >>> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >>> + transfers by running SOF/ITP counters using the >>> + reference clock. Only valid for DWC_usb31 peripheral >>> + controller v1.80a and higher. Both >>> + "snps,dis_u2_susphy_quirk" and >>> + "snps,dis_enblslpm_quirk" must not be set. >> sounds like you should rely on clk API here. Then on driver call >> clk_get_rate() to computer whatever you need to compute. >> > There's nothing to compute here. We can simply enable this feature with > "snps, enable-refclk-lpm" and the controller will use the default refclk > settings. Right, right. What I'm saying, though, is that we have a clock API for describing a clock. So why wouldn't we rely on that API for this? I think both of these new properties can be replaced with standard clock API properties: clocks = <&clk1>, ..., <&lpm_clk> clock-names = "clock1", ...., "lpm"; Then dwc3 core could, simply, check if we have a clock named "lpm" and if there is, use NSECS_PER_SEC / clk_get_rate() to get its period and write it to the register that needs the information. -- balbi [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-07 6:37 ` Felipe Balbi @ 2018-11-07 22:49 ` Thinh Nguyen 2018-11-08 7:17 ` Felipe Balbi 0 siblings, 1 reply; 12+ messages in thread From: Thinh Nguyen @ 2018-11-07 22:49 UTC (permalink / raw) To: Felipe Balbi, Thinh Nguyen, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring, Mark Rutland Cc: John Youn Hi Felipe, On 11/6/2018 10:37 PM, Felipe Balbi wrote: > Hi, > > Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>> Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>> Add two new device properties to program the reference clock period and >>>> to enable low power management using the reference clock. This allows a >>>> higher demand to go in low power for Audio Device Class devices. This >>>> feature is currently only valid for DWC_usb31 peripheral controller >>>> v1.80a and higher. >>>> >>>> Set "snps,refclk-period-ns" to program the reference clock period. The >>>> valid input periods are as follow: >>>> +-------------+-----------------+ >>>> | Period (ns) | Freq (MHz) | >>>> +-------------+-----------------+ >>>> | 25 | 39.7/40 | >>>> | 41 | 24.4 | >>>> | 50 | 20 | >>>> | 52 | 19.2 | >>>> | 58 | 17.2 | >>>> | 62 | 16.1 | >>>> +-------------+-----------------+ >>>> >>>> Set "snps,refclk-lpm" to enable low power scheduling of isochronous >>>> transfers by running SOF/ITP counters using the reference clock. Both >>>> "snps,dis_u2_susphy_quirk" and "snps,dis_enblslpm_quirk" must not be >>>> set for this feature to be enabled. >>>> >>>> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> >>>> --- >>>> Documentation/devicetree/bindings/usb/dwc3.txt | 18 ++++++++++++++++++ >>>> 1 file changed, 18 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>> index 636630fb92d7..712b344c3a31 100644 >>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>> @@ -95,6 +95,24 @@ Optional properties: >>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>> enable periodic ESS TX threshold. >>>> + - snps,refclk-period-ns: set to program the reference clock period. The valid >>>> + input periods are as follow: >>>> + +-------------+-----------------+ >>>> + | Period (ns) | Freq (MHz) | >>>> + +-------------+-----------------+ >>>> + | 25 | 39.7/40 | >>>> + | 41 | 24.4 | >>>> + | 50 | 20 | >>>> + | 52 | 19.2 | >>>> + | 58 | 17.2 | >>>> + | 62 | 16.1 | >>>> + +-------------+-----------------+ >>>> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >>>> + transfers by running SOF/ITP counters using the >>>> + reference clock. Only valid for DWC_usb31 peripheral >>>> + controller v1.80a and higher. Both >>>> + "snps,dis_u2_susphy_quirk" and >>>> + "snps,dis_enblslpm_quirk" must not be set. >>> sounds like you should rely on clk API here. Then on driver call >>> clk_get_rate() to computer whatever you need to compute. >>> >> There's nothing to compute here. We can simply enable this feature with >> "snps, enable-refclk-lpm" and the controller will use the default refclk >> settings. > Right, right. What I'm saying, though, is that we have a clock API for > describing a clock. So why wouldn't we rely on that API for this? I > think both of these new properties can be replaced with standard clock > API properties: > > clocks = <&clk1>, ..., <&lpm_clk> > clock-names = "clock1", ...., "lpm"; > > Then dwc3 core could, simply, check if we have a clock named "lpm" and > if there is, use NSECS_PER_SEC / clk_get_rate() to get its period and > write it to the register that needs the information. There's no new clock here. We are using the ref_clk for SOF and ITP counter for this feature. Also, clocks are optional on non-DT platforms. To use the clock API, then we need to update the driver to allow some optional clock such as "ref" clock for non-DT platforms. Do you want to do it like this? Thinh ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-07 22:49 ` Thinh Nguyen @ 2018-11-08 7:17 ` Felipe Balbi 2018-11-08 19:51 ` Thinh Nguyen 0 siblings, 1 reply; 12+ messages in thread From: Felipe Balbi @ 2018-11-08 7:17 UTC (permalink / raw) To: Thinh Nguyen; +Cc: John Youn [-- Attachment #1: Type: text/plain, Size: 2774 bytes --] Hi, Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>> index 636630fb92d7..712b344c3a31 100644 >>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>> @@ -95,6 +95,24 @@ Optional properties: >>>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>>> enable periodic ESS TX threshold. >>>>> + - snps,refclk-period-ns: set to program the reference clock period. The valid >>>>> + input periods are as follow: >>>>> + +-------------+-----------------+ >>>>> + | Period (ns) | Freq (MHz) | >>>>> + +-------------+-----------------+ >>>>> + | 25 | 39.7/40 | >>>>> + | 41 | 24.4 | >>>>> + | 50 | 20 | >>>>> + | 52 | 19.2 | >>>>> + | 58 | 17.2 | >>>>> + | 62 | 16.1 | >>>>> + +-------------+-----------------+ >>>>> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >>>>> + transfers by running SOF/ITP counters using the >>>>> + reference clock. Only valid for DWC_usb31 peripheral >>>>> + controller v1.80a and higher. Both >>>>> + "snps,dis_u2_susphy_quirk" and >>>>> + "snps,dis_enblslpm_quirk" must not be set. >>>> sounds like you should rely on clk API here. Then on driver call >>>> clk_get_rate() to computer whatever you need to compute. >>>> >>> There's nothing to compute here. We can simply enable this feature with >>> "snps, enable-refclk-lpm" and the controller will use the default refclk >>> settings. >> Right, right. What I'm saying, though, is that we have a clock API for >> describing a clock. So why wouldn't we rely on that API for this? I >> think both of these new properties can be replaced with standard clock >> API properties: >> >> clocks = <&clk1>, ..., <&lpm_clk> >> clock-names = "clock1", ...., "lpm"; >> >> Then dwc3 core could, simply, check if we have a clock named "lpm" and >> if there is, use NSECS_PER_SEC / clk_get_rate() to get its period and >> write it to the register that needs the information. > There's no new clock here. We are using the ref_clk for SOF and ITP > counter for this feature. Also, clocks are optional on non-DT platforms. > To use the clock API, then we need to update the driver to allow some > optional clock such as "ref" clock for non-DT platforms. Do you want to > do it like this? I can't think of a problem that would arise from that. Can you? Mark, Rob, what do you think? -- balbi [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-08 7:17 ` Felipe Balbi @ 2018-11-08 19:51 ` Thinh Nguyen 2018-11-09 7:14 ` Felipe Balbi 0 siblings, 1 reply; 12+ messages in thread From: Thinh Nguyen @ 2018-11-08 19:51 UTC (permalink / raw) To: Felipe Balbi, Thinh Nguyen, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring, Mark Rutland Cc: John Youn Hi Felipe, On 11/7/2018 11:17 PM, Felipe Balbi wrote: > Hi, > > Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>> index 636630fb92d7..712b344c3a31 100644 >>>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>> @@ -95,6 +95,24 @@ Optional properties: >>>>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>>>> enable periodic ESS TX threshold. >>>>>> + - snps,refclk-period-ns: set to program the reference clock period. The valid >>>>>> + input periods are as follow: >>>>>> + +-------------+-----------------+ >>>>>> + | Period (ns) | Freq (MHz) | >>>>>> + +-------------+-----------------+ >>>>>> + | 25 | 39.7/40 | >>>>>> + | 41 | 24.4 | >>>>>> + | 50 | 20 | >>>>>> + | 52 | 19.2 | >>>>>> + | 58 | 17.2 | >>>>>> + | 62 | 16.1 | >>>>>> + +-------------+-----------------+ >>>>>> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >>>>>> + transfers by running SOF/ITP counters using the >>>>>> + reference clock. Only valid for DWC_usb31 peripheral >>>>>> + controller v1.80a and higher. Both >>>>>> + "snps,dis_u2_susphy_quirk" and >>>>>> + "snps,dis_enblslpm_quirk" must not be set. >>>>> sounds like you should rely on clk API here. Then on driver call >>>>> clk_get_rate() to computer whatever you need to compute. >>>>> >>>> There's nothing to compute here. We can simply enable this feature with >>>> "snps, enable-refclk-lpm" and the controller will use the default refclk >>>> settings. >>> Right, right. What I'm saying, though, is that we have a clock API for >>> describing a clock. So why wouldn't we rely on that API for this? I >>> think both of these new properties can be replaced with standard clock >>> API properties: >>> >>> clocks = <&clk1>, ..., <&lpm_clk> >>> clock-names = "clock1", ...., "lpm"; >>> >>> Then dwc3 core could, simply, check if we have a clock named "lpm" and >>> if there is, use NSECS_PER_SEC / clk_get_rate() to get its period and >>> write it to the register that needs the information. >> There's no new clock here. We are using the ref_clk for SOF and ITP >> counter for this feature. Also, clocks are optional on non-DT platforms. >> To use the clock API, then we need to update the driver to allow some >> optional clock such as "ref" clock for non-DT platforms. Do you want to >> do it like this? > I can't think of a problem that would arise from that. Can you? Mark, > Rob, what do you think? > No problem. That can be done. This will remove the "snps,refclk-period-ns" property. But we should have "snps,enable-refclk-lpm" to enable this feature. Thinh ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-08 19:51 ` Thinh Nguyen @ 2018-11-09 7:14 ` Felipe Balbi 2018-11-09 7:45 ` Thinh Nguyen 0 siblings, 1 reply; 12+ messages in thread From: Felipe Balbi @ 2018-11-09 7:14 UTC (permalink / raw) To: Thinh Nguyen; +Cc: John Youn [-- Attachment #1: Type: text/plain, Size: 3191 bytes --] Hi, Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >> Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>> index 636630fb92d7..712b344c3a31 100644 >>>>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>> @@ -95,6 +95,24 @@ Optional properties: >>>>>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>>>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>>>>> enable periodic ESS TX threshold. >>>>>>> + - snps,refclk-period-ns: set to program the reference clock period. The valid >>>>>>> + input periods are as follow: >>>>>>> + +-------------+-----------------+ >>>>>>> + | Period (ns) | Freq (MHz) | >>>>>>> + +-------------+-----------------+ >>>>>>> + | 25 | 39.7/40 | >>>>>>> + | 41 | 24.4 | >>>>>>> + | 50 | 20 | >>>>>>> + | 52 | 19.2 | >>>>>>> + | 58 | 17.2 | >>>>>>> + | 62 | 16.1 | >>>>>>> + +-------------+-----------------+ >>>>>>> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >>>>>>> + transfers by running SOF/ITP counters using the >>>>>>> + reference clock. Only valid for DWC_usb31 peripheral >>>>>>> + controller v1.80a and higher. Both >>>>>>> + "snps,dis_u2_susphy_quirk" and >>>>>>> + "snps,dis_enblslpm_quirk" must not be set. >>>>>> sounds like you should rely on clk API here. Then on driver call >>>>>> clk_get_rate() to computer whatever you need to compute. >>>>>> >>>>> There's nothing to compute here. We can simply enable this feature with >>>>> "snps, enable-refclk-lpm" and the controller will use the default refclk >>>>> settings. >>>> Right, right. What I'm saying, though, is that we have a clock API for >>>> describing a clock. So why wouldn't we rely on that API for this? I >>>> think both of these new properties can be replaced with standard clock >>>> API properties: >>>> >>>> clocks = <&clk1>, ..., <&lpm_clk> >>>> clock-names = "clock1", ...., "lpm"; >>>> >>>> Then dwc3 core could, simply, check if we have a clock named "lpm" and >>>> if there is, use NSECS_PER_SEC / clk_get_rate() to get its period and >>>> write it to the register that needs the information. >>> There's no new clock here. We are using the ref_clk for SOF and ITP >>> counter for this feature. Also, clocks are optional on non-DT platforms. >>> To use the clock API, then we need to update the driver to allow some >>> optional clock such as "ref" clock for non-DT platforms. Do you want to >>> do it like this? >> I can't think of a problem that would arise from that. Can you? Mark, >> Rob, what do you think? >> > No problem. That can be done. This will remove the > "snps,refclk-period-ns" property. But we should have > "snps,enable-refclk-lpm" to enable this feature. not really. Just check if you have a clock named lpm. If you do, then you enable the feature. -- balbi [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-09 7:14 ` Felipe Balbi @ 2018-11-09 7:45 ` Thinh Nguyen 2018-11-09 8:54 ` Felipe Balbi 0 siblings, 1 reply; 12+ messages in thread From: Thinh Nguyen @ 2018-11-09 7:45 UTC (permalink / raw) To: Felipe Balbi, Thinh Nguyen, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring, Mark Rutland Cc: John Youn Hi Felipe, On 11/8/2018 11:14 PM, Felipe Balbi wrote: > Hi, > > Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>> Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>>>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>> index 636630fb92d7..712b344c3a31 100644 >>>>>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>> @@ -95,6 +95,24 @@ Optional properties: >>>>>>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>>>>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>>>>>> enable periodic ESS TX threshold. >>>>>>>> + - snps,refclk-period-ns: set to program the reference clock period. The valid >>>>>>>> + input periods are as follow: >>>>>>>> + +-------------+-----------------+ >>>>>>>> + | Period (ns) | Freq (MHz) | >>>>>>>> + +-------------+-----------------+ >>>>>>>> + | 25 | 39.7/40 | >>>>>>>> + | 41 | 24.4 | >>>>>>>> + | 50 | 20 | >>>>>>>> + | 52 | 19.2 | >>>>>>>> + | 58 | 17.2 | >>>>>>>> + | 62 | 16.1 | >>>>>>>> + +-------------+-----------------+ >>>>>>>> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >>>>>>>> + transfers by running SOF/ITP counters using the >>>>>>>> + reference clock. Only valid for DWC_usb31 peripheral >>>>>>>> + controller v1.80a and higher. Both >>>>>>>> + "snps,dis_u2_susphy_quirk" and >>>>>>>> + "snps,dis_enblslpm_quirk" must not be set. >>>>>>> sounds like you should rely on clk API here. Then on driver call >>>>>>> clk_get_rate() to computer whatever you need to compute. >>>>>>> >>>>>> There's nothing to compute here. We can simply enable this feature with >>>>>> "snps, enable-refclk-lpm" and the controller will use the default refclk >>>>>> settings. >>>>> Right, right. What I'm saying, though, is that we have a clock API for >>>>> describing a clock. So why wouldn't we rely on that API for this? I >>>>> think both of these new properties can be replaced with standard clock >>>>> API properties: >>>>> >>>>> clocks = <&clk1>, ..., <&lpm_clk> >>>>> clock-names = "clock1", ...., "lpm"; >>>>> >>>>> Then dwc3 core could, simply, check if we have a clock named "lpm" and >>>>> if there is, use NSECS_PER_SEC / clk_get_rate() to get its period and >>>>> write it to the register that needs the information. >>>> There's no new clock here. We are using the ref_clk for SOF and ITP >>>> counter for this feature. Also, clocks are optional on non-DT platforms. >>>> To use the clock API, then we need to update the driver to allow some >>>> optional clock such as "ref" clock for non-DT platforms. Do you want to >>>> do it like this? >>> I can't think of a problem that would arise from that. Can you? Mark, >>> Rob, what do you think? >>> >> No problem. That can be done. This will remove the >> "snps,refclk-period-ns" property. But we should have >> "snps,enable-refclk-lpm" to enable this feature. > not really. Just check if you have a clock named lpm. If you do, then > you enable the feature. > But this clock name should be "ref". The new name "lpm" would make it seem like it's a different clock. Thinh ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-09 7:45 ` Thinh Nguyen @ 2018-11-09 8:54 ` Felipe Balbi 2018-12-08 2:25 ` Thinh Nguyen 0 siblings, 1 reply; 12+ messages in thread From: Felipe Balbi @ 2018-11-09 8:54 UTC (permalink / raw) To: Thinh Nguyen; +Cc: John Youn [-- Attachment #1: Type: text/plain, Size: 3649 bytes --] Hi, Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >> Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>> Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>>>>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>>> index 636630fb92d7..712b344c3a31 100644 >>>>>>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>>> @@ -95,6 +95,24 @@ Optional properties: >>>>>>>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>>>>>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>>>>>>> enable periodic ESS TX threshold. >>>>>>>>> + - snps,refclk-period-ns: set to program the reference clock period. The valid >>>>>>>>> + input periods are as follow: >>>>>>>>> + +-------------+-----------------+ >>>>>>>>> + | Period (ns) | Freq (MHz) | >>>>>>>>> + +-------------+-----------------+ >>>>>>>>> + | 25 | 39.7/40 | >>>>>>>>> + | 41 | 24.4 | >>>>>>>>> + | 50 | 20 | >>>>>>>>> + | 52 | 19.2 | >>>>>>>>> + | 58 | 17.2 | >>>>>>>>> + | 62 | 16.1 | >>>>>>>>> + +-------------+-----------------+ >>>>>>>>> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >>>>>>>>> + transfers by running SOF/ITP counters using the >>>>>>>>> + reference clock. Only valid for DWC_usb31 peripheral >>>>>>>>> + controller v1.80a and higher. Both >>>>>>>>> + "snps,dis_u2_susphy_quirk" and >>>>>>>>> + "snps,dis_enblslpm_quirk" must not be set. >>>>>>>> sounds like you should rely on clk API here. Then on driver call >>>>>>>> clk_get_rate() to computer whatever you need to compute. >>>>>>>> >>>>>>> There's nothing to compute here. We can simply enable this feature with >>>>>>> "snps, enable-refclk-lpm" and the controller will use the default refclk >>>>>>> settings. >>>>>> Right, right. What I'm saying, though, is that we have a clock API for >>>>>> describing a clock. So why wouldn't we rely on that API for this? I >>>>>> think both of these new properties can be replaced with standard clock >>>>>> API properties: >>>>>> >>>>>> clocks = <&clk1>, ..., <&lpm_clk> >>>>>> clock-names = "clock1", ...., "lpm"; >>>>>> >>>>>> Then dwc3 core could, simply, check if we have a clock named "lpm" and >>>>>> if there is, use NSECS_PER_SEC / clk_get_rate() to get its period and >>>>>> write it to the register that needs the information. >>>>> There's no new clock here. We are using the ref_clk for SOF and ITP >>>>> counter for this feature. Also, clocks are optional on non-DT platforms. >>>>> To use the clock API, then we need to update the driver to allow some >>>>> optional clock such as "ref" clock for non-DT platforms. Do you want to >>>>> do it like this? >>>> I can't think of a problem that would arise from that. Can you? Mark, >>>> Rob, what do you think? >>>> >>> No problem. That can be done. This will remove the >>> "snps,refclk-period-ns" property. But we should have >>> "snps,enable-refclk-lpm" to enable this feature. >> not really. Just check if you have a clock named lpm. If you do, then >> you enable the feature. >> > But this clock name should be "ref". The new name "lpm" would make it > seem like it's a different clock. now I understand. There's no special LPM clock, this is just the regular old reference clock being used for LPM. I agree with you, only refclk-period-ns will be replaced. -- balbi [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] usb: dwc3: Add reference clock properties 2018-11-09 8:54 ` Felipe Balbi @ 2018-12-08 2:25 ` Thinh Nguyen 0 siblings, 0 replies; 12+ messages in thread From: Thinh Nguyen @ 2018-12-08 2:25 UTC (permalink / raw) To: Felipe Balbi, Thinh Nguyen, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring, Mark Rutland Cc: John Youn Hi Felipe, On 11/9/2018 12:54 AM, Felipe Balbi wrote: > Hi, > > Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>> Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>>> Thinh Nguyen <thinh.nguyen@synopsys.com> writes: >>>>>>>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>>>> index 636630fb92d7..712b344c3a31 100644 >>>>>>>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>>>>>>> @@ -95,6 +95,24 @@ Optional properties: >>>>>>>>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>>>>>>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>>>>>>>> enable periodic ESS TX threshold. >>>>>>>>>> + - snps,refclk-period-ns: set to program the reference clock period. The valid >>>>>>>>>> + input periods are as follow: >>>>>>>>>> + +-------------+-----------------+ >>>>>>>>>> + | Period (ns) | Freq (MHz) | >>>>>>>>>> + +-------------+-----------------+ >>>>>>>>>> + | 25 | 39.7/40 | >>>>>>>>>> + | 41 | 24.4 | >>>>>>>>>> + | 50 | 20 | >>>>>>>>>> + | 52 | 19.2 | >>>>>>>>>> + | 58 | 17.2 | >>>>>>>>>> + | 62 | 16.1 | >>>>>>>>>> + +-------------+-----------------+ >>>>>>>>>> + - snps,enable-refclk-lpm: set to enable low power scheduling of isochronous >>>>>>>>>> + transfers by running SOF/ITP counters using the >>>>>>>>>> + reference clock. Only valid for DWC_usb31 peripheral >>>>>>>>>> + controller v1.80a and higher. Both >>>>>>>>>> + "snps,dis_u2_susphy_quirk" and >>>>>>>>>> + "snps,dis_enblslpm_quirk" must not be set. >>>>>>>>> sounds like you should rely on clk API here. Then on driver call >>>>>>>>> clk_get_rate() to computer whatever you need to compute. >>>>>>>>> >>>>>>>> There's nothing to compute here. We can simply enable this feature with >>>>>>>> "snps, enable-refclk-lpm" and the controller will use the default refclk >>>>>>>> settings. >>>>>>> Right, right. What I'm saying, though, is that we have a clock API for >>>>>>> describing a clock. So why wouldn't we rely on that API for this? I >>>>>>> think both of these new properties can be replaced with standard clock >>>>>>> API properties: >>>>>>> >>>>>>> clocks = <&clk1>, ..., <&lpm_clk> >>>>>>> clock-names = "clock1", ...., "lpm"; >>>>>>> >>>>>>> Then dwc3 core could, simply, check if we have a clock named "lpm" and >>>>>>> if there is, use NSECS_PER_SEC / clk_get_rate() to get its period and >>>>>>> write it to the register that needs the information. >>>>>> There's no new clock here. We are using the ref_clk for SOF and ITP >>>>>> counter for this feature. Also, clocks are optional on non-DT platforms. >>>>>> To use the clock API, then we need to update the driver to allow some >>>>>> optional clock such as "ref" clock for non-DT platforms. Do you want to >>>>>> do it like this? >>>>> I can't think of a problem that would arise from that. Can you? Mark, >>>>> Rob, what do you think? >>>>> >>>> No problem. That can be done. This will remove the >>>> "snps,refclk-period-ns" property. But we should have >>>> "snps,enable-refclk-lpm" to enable this feature. >>> not really. Just check if you have a clock named lpm. If you do, then >>> you enable the feature. >>> >> But this clock name should be "ref". The new name "lpm" would make it >> seem like it's a different clock. > now I understand. There's no special LPM clock, this is just the regular > old reference clock being used for LPM. I agree with you, only > refclk-period-ns will be replaced. > I had some misunderstanding with the purpose of GUCTL.REFCLKPER. After a discussion with the RTL engineers, it's not to control the reference clock. Setting this register field does not control the reference clock rate. The controller uses this value to perform internal timing calculations that are based on the reference clock. So, we will still need this property to set this value. I will resend the patch series with some changes and correct the commit messages with the proper definition of this feature. Thanks, Thinh ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2018-12-08 2:25 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-11-03 1:35 [PATCH 0/3] usb: dwc3: Introduce refclk lpm Thinh Nguyen 2018-11-03 1:35 ` [PATCH 1/3] usb: dwc3: Add reference clock properties Thinh Nguyen 2018-11-06 11:26 ` Felipe Balbi 2018-11-07 4:11 ` Thinh Nguyen 2018-11-07 6:37 ` Felipe Balbi 2018-11-07 22:49 ` Thinh Nguyen 2018-11-08 7:17 ` Felipe Balbi 2018-11-08 19:51 ` Thinh Nguyen 2018-11-09 7:14 ` Felipe Balbi 2018-11-09 7:45 ` Thinh Nguyen 2018-11-09 8:54 ` Felipe Balbi 2018-12-08 2:25 ` Thinh Nguyen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).