Re: [PATCH v6 12/14] arm64: dts: marvell: add AP806 SEI subnode

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Hi Miquel,
 
 On lun., oct. 01 2018, Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Add the System Error Interrupt node, representing an IRQ chip which is
> part of the GIC. The SEI node aggregates interrupts from the AP through
> wired interrupts, and from the CPs through MSIs.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Applied on mvebu/dt64

Thanks,

Gregory

> ---
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 176e38d54872..92215342b453 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -124,6 +124,15 @@
>  				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
>  			};
>  
> +			sei: interrupt-controller@3f0200 {
> +				compatible = "marvell,ap806-sei";
> +				reg = <0x3f0200 0x40>;
> +				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> +				#interrupt-cells = <1>;
> +				interrupt-controller;
> +				msi-controller;
> +			};
> +
>  			xor@400000 {
>  				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
>  				reg = <0x400000 0x1000>,
> -- 
> 2.17.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com