[PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation

[PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation

[Robert Jarzmik]

For pxa based platforms, the number of requestor lines should be
specified, so that the driver can check if the flow control should be
activated (when a requestor line is asked for) or not.

Signed-off-by: Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>
---
Since v1: rename of property to #dma-requests
      	  modify default value to 32 as suggested by Vinod
---
 Documentation/devicetree/bindings/dma/mmp-dma.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
index 7a802f64e5bd..8f7364a7b349 100644
--- a/Documentation/devicetree/bindings/dma/mmp-dma.txt
+++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt
@@ -12,6 +12,8 @@ Required properties:
 Optional properties:
 - #dma-channels: Number of DMA channels supported by the controller (defaults
   to 32 when not specified)
+- #dma-requests: Number of DMA requestor lines supported by the controller
+  (defaults to 32 when not specified)
 
 "marvell,pdma-1.0"
 Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/4] dmaengine: mmp-pdma: add number of requestors

[Robert Jarzmik]

The DMA chip has a fixed number of requestor lines used for flow
control. This number is platform dependent. The pxa_dma dma driver will
use this value to activate or not the flow control.

There won't be any impact on mmp_pdma driver.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 include/linux/platform_data/mmp_dma.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h
index 2a330ec9e2af..d1397c8ed94e 100644
--- a/include/linux/platform_data/mmp_dma.h
+++ b/include/linux/platform_data/mmp_dma.h
@@ -14,6 +14,7 @@
 
 struct mmp_dma_platdata {
 	int dma_channels;
+	int nb_requestors;
 };
 
 #endif /* MMP_DMA_H */
-- 
2.1.4

Re: [PATCH v2 2/4] dmaengine: mmp-pdma: add number of requestors

[Robert Jarzmik]

Robert Jarzmik <robert.jarzmik@free.fr> writes:

> The DMA chip has a fixed number of requestor lines used for flow
> control. This number is platform dependent. The pxa_dma dma driver will
> use this value to activate or not the flow control.
>
> There won't be any impact on mmp_pdma driver.
Haojian,

Even if mmp_pdma will not be impacted, it would be good to have have your ack on
this trivial patch.

Cheers.

[PATCH v2 3/4] ARM: pxa: add the number of DMA requestor lines

[Robert Jarzmik]

Declare the number of DMA requestor lines per platform :
 - for pxa25x: 40 requestor lines
 - for pxa27x: 75 requestor lines
 - for pxa3xx: 100 requestor lines

This information will be used to activate the DMA flow control or not.

Signed-off-by: Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>
---
Since v1: rename of property to #dma-requests
---
 arch/arm/boot/dts/pxa27x.dtsi        | 1 +
 arch/arm/boot/dts/pxa3xx.dtsi        | 1 +
 arch/arm/mach-pxa/devices.c          | 3 ++-
 arch/arm/mach-pxa/pxa25x.c           | 2 +-
 arch/arm/mach-pxa/pxa27x.c           | 2 +-
 arch/arm/mach-pxa/pxa3xx.c           | 2 +-
 arch/arm/plat-pxa/include/plat/dma.h | 2 +-
 7 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index ef366b204c89..aab08a48dbca 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -13,6 +13,7 @@
 			interrupts = <25>;
 			#dma-channels = <32>;
 			#dma-cells = <2>;
+			#dma-requests = <75>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index cf6998a0804d..bea454f50ff9 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -12,6 +12,7 @@
 			interrupts = <25>;
 			#dma-channels = <32>;
 			#dma-cells = <2>;
+			#dma-requests = <100>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 6e12c162506f..d9ff6e4dd854 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1233,6 +1233,7 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
 
 static struct mmp_dma_platdata pxa_dma_pdata = {
 	.dma_channels	= 0,
+	.nb_requestors	= 0,
 };
 
 static struct resource pxa_dma_resource[] = {
@@ -1261,7 +1262,7 @@ static struct platform_device pxa2xx_pxa_dma = {
 	.resource	= pxa_dma_resource,
 };
 
-void __init pxa2xx_set_dmac_info(int nb_channels)
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
 {
 	pxa_dma_pdata.dma_channels = nb_channels;
 	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index a177bf45feef..823504f48f80 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -206,7 +206,7 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
-		pxa2xx_set_dmac_info(16);
+		pxa2xx_set_dmac_info(16, 40);
 		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 73e96270dc53..d84239c89639 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -310,7 +310,7 @@ static int __init pxa27x_init(void)
 		if (!of_have_populated_dt()) {
 			pxa_register_device(&pxa27x_device_gpio,
 					    &pxa27x_gpio_info);
-			pxa2xx_set_dmac_info(32);
+			pxa2xx_set_dmac_info(32, 75);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
 		}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index a1c4c888f246..fb0adb669124 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -450,7 +450,7 @@ static int __init pxa3xx_init(void)
 		if (of_have_populated_dt())
 			return 0;
 
-		pxa2xx_set_dmac_info(32);
+		pxa2xx_set_dmac_info(32, 100);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 		if (ret)
 			return ret;
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
index 28848b344e2d..ceba3e4184fc 100644
--- a/arch/arm/plat-pxa/include/plat/dma.h
+++ b/arch/arm/plat-pxa/include/plat/dma.h
@@ -95,6 +95,6 @@ static inline int pxad_toggle_reserved_channel(int legacy_channel)
 }
 #endif
 
-extern void __init pxa2xx_set_dmac_info(int nb_channels);
+extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
 
 #endif /* __PLAT_DMA_H */
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line

[Robert Jarzmik]

The current number of requestor lines is limited to 31. This was an
error of a previous commit, as this number is platform dependent, and is
actually :
 - for pxa25x: 40 requestor lines
 - for pxa27x: 75 requestor lines
 - for pxa3xx: 100 requestor lines

The previous testing did not reveal the faulty constant as on pxa[23]xx
platforms, only camera, MSL and USB are above requestor 32, and in these
only the camera has a driver using dma.

Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case")
Signed-off-by: Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>
---
Since v1: change to #dma-requests the of property name
      	  default to 32 requestors and warn as suggested by Vinod
---
 drivers/dma/pxa_dma.c | 39 ++++++++++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 11 deletions(-)

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index ca6c088edc8a..8b333601687f 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -122,6 +122,7 @@ struct pxad_chan {
 struct pxad_device {
 	struct dma_device		slave;
 	int				nr_chans;
+	int				nr_requestors;
 	void __iomem			*base;
 	struct pxad_phy			*phys;
 	spinlock_t			phy_lock;	/* Phy association */
@@ -473,7 +474,7 @@ static void pxad_free_phy(struct pxad_chan *chan)
 		return;
 
 	/* clear the channel mapping in DRCMR */
-	if (chan->drcmr <= DRCMR_CHLNUM) {
+	if (chan->drcmr <= pdev->nr_requestors) {
 		reg = pxad_drcmr(chan->drcmr);
 		writel_relaxed(0, chan->phy->base + reg);
 	}
@@ -509,6 +510,7 @@ static bool is_running_chan_misaligned(struct pxad_chan *chan)
 
 static void phy_enable(struct pxad_phy *phy, bool misaligned)
 {
+	struct pxad_device *pdev;
 	u32 reg, dalgn;
 
 	if (!phy->vchan)
@@ -518,7 +520,8 @@ static void phy_enable(struct pxad_phy *phy, bool misaligned)
 		"%s(); phy=%p(%d) misaligned=%d\n", __func__,
 		phy, phy->idx, misaligned);
 
-	if (phy->vchan->drcmr <= DRCMR_CHLNUM) {
+	pdev = to_pxad_dev(phy->vchan->vc.chan.device);
+	if (phy->vchan->drcmr <= pdev->nr_requestors) {
 		reg = pxad_drcmr(phy->vchan->drcmr);
 		writel_relaxed(DRCMR_MAPVLD | phy->idx, phy->base + reg);
 	}
@@ -914,6 +917,7 @@ static void pxad_get_config(struct pxad_chan *chan,
 {
 	u32 maxburst = 0, dev_addr = 0;
 	enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
+	struct pxad_device *pdev = to_pxad_dev(chan->vc.chan.device);
 
 	*dcmd = 0;
 	if (dir == DMA_DEV_TO_MEM) {
@@ -922,7 +926,7 @@ static void pxad_get_config(struct pxad_chan *chan,
 		dev_addr = chan->cfg.src_addr;
 		*dev_src = dev_addr;
 		*dcmd |= PXA_DCMD_INCTRGADDR;
-		if (chan->drcmr <= DRCMR_CHLNUM)
+		if (chan->drcmr <= pdev->nr_requestors)
 			*dcmd |= PXA_DCMD_FLOWSRC;
 	}
 	if (dir == DMA_MEM_TO_DEV) {
@@ -931,7 +935,7 @@ static void pxad_get_config(struct pxad_chan *chan,
 		dev_addr = chan->cfg.dst_addr;
 		*dev_dst = dev_addr;
 		*dcmd |= PXA_DCMD_INCSRCADDR;
-		if (chan->drcmr <= DRCMR_CHLNUM)
+		if (chan->drcmr <= pdev->nr_requestors)
 			*dcmd |= PXA_DCMD_FLOWTRG;
 	}
 	if (dir == DMA_MEM_TO_MEM)
@@ -1341,13 +1345,15 @@ static struct dma_chan *pxad_dma_xlate(struct of_phandle_args *dma_spec,
 
 static int pxad_init_dmadev(struct platform_device *op,
 			    struct pxad_device *pdev,
-			    unsigned int nr_phy_chans)
+			    unsigned int nr_phy_chans,
+			    unsigned int nr_requestors)
 {
 	int ret;
 	unsigned int i;
 	struct pxad_chan *c;
 
 	pdev->nr_chans = nr_phy_chans;
+	pdev->nr_requestors = nr_requestors;
 	INIT_LIST_HEAD(&pdev->slave.channels);
 	pdev->slave.device_alloc_chan_resources = pxad_alloc_chan_resources;
 	pdev->slave.device_free_chan_resources = pxad_free_chan_resources;
@@ -1382,7 +1388,7 @@ static int pxad_probe(struct platform_device *op)
 	const struct of_device_id *of_id;
 	struct mmp_dma_platdata *pdata = dev_get_platdata(&op->dev);
 	struct resource *iores;
-	int ret, dma_channels = 0;
+	int ret, dma_channels = 0, nb_requestors = 0;
 	const enum dma_slave_buswidth widths =
 		DMA_SLAVE_BUSWIDTH_1_BYTE   | DMA_SLAVE_BUSWIDTH_2_BYTES |
 		DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1399,13 +1405,23 @@ static int pxad_probe(struct platform_device *op)
 		return PTR_ERR(pdev->base);
 
 	of_id = of_match_device(pxad_dt_ids, &op->dev);
-	if (of_id)
+	if (of_id) {
 		of_property_read_u32(op->dev.of_node, "#dma-channels",
 				     &dma_channels);
-	else if (pdata && pdata->dma_channels)
+		ret = of_property_read_u32(op->dev.of_node, "#dma-requests",
+					   &nb_requestors);
+		if (ret) {
+			dev_warn(pdev->slave.dev,
+				 "#dma-requests set to default 32 as missing in OF: %d",
+				 ret);
+			nb_requestors = 32;
+		};
+	} else if (pdata && pdata->dma_channels) {
 		dma_channels = pdata->dma_channels;
-	else
+		nb_requestors = pdata->nb_requestors;
+	} else {
 		dma_channels = 32;	/* default 32 channel */
+	}
 
 	dma_cap_set(DMA_SLAVE, pdev->slave.cap_mask);
 	dma_cap_set(DMA_MEMCPY, pdev->slave.cap_mask);
@@ -1423,7 +1439,7 @@ static int pxad_probe(struct platform_device *op)
 	pdev->slave.descriptor_reuse = true;
 
 	pdev->slave.dev = &op->dev;
-	ret = pxad_init_dmadev(op, pdev, dma_channels);
+	ret = pxad_init_dmadev(op, pdev, dma_channels, nb_requestors);
 	if (ret) {
 		dev_err(pdev->slave.dev, "unable to register\n");
 		return ret;
@@ -1442,7 +1458,8 @@ static int pxad_probe(struct platform_device *op)
 
 	platform_set_drvdata(op, pdev);
 	pxad_init_debugfs(pdev);
-	dev_info(pdev->slave.dev, "initialized %d channels\n", dma_channels);
+	dev_info(pdev->slave.dev, "initialized %d channels on %d requestors\n",
+		 dma_channels, nb_requestors);
 	return 0;
 }
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line

[Robert Jarzmik]

Robert Jarzmik <robert.jarzmik@free.fr> writes:

> The current number of requestor lines is limited to 31. This was an
> error of a previous commit, as this number is platform dependent, and is
> actually :
>  - for pxa25x: 40 requestor lines
>  - for pxa27x: 75 requestor lines
>  - for pxa3xx: 100 requestor lines
>
> The previous testing did not reveal the faulty constant as on pxa[23]xx
> platforms, only camera, MSL and USB are above requestor 32, and in these
> only the camera has a driver using dma.
>
> Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case")
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> ---
> Since v1: change to #dma-requests the of property name
>       	  default to 32 requestors and warn as suggested by Vinod

Hi Vinod,

Are you happy with this version ?
If so could you provide me your Acked-by please ?

Cheers.

Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line

[Vinod Koul]

On Mon, Feb 15, 2016 at 09:57:48PM +0100, Robert Jarzmik wrote:
> The current number of requestor lines is limited to 31. This was an
> error of a previous commit, as this number is platform dependent, and is
> actually :
>  - for pxa25x: 40 requestor lines
>  - for pxa27x: 75 requestor lines
>  - for pxa3xx: 100 requestor lines
> 
> The previous testing did not reveal the faulty constant as on pxa[23]xx
> platforms, only camera, MSL and USB are above requestor 32, and in these
> only the camera has a driver using dma.
> 
> Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case")
> Signed-off-by: Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>

Acked-by: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

Which tree is this targetted thru?

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line

[Robert Jarzmik]

Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> writes:

> On Mon, Feb 15, 2016 at 09:57:48PM +0100, Robert Jarzmik wrote:
>> The current number of requestor lines is limited to 31. This was an
>> error of a previous commit, as this number is platform dependent, and is
>> actually :
>>  - for pxa25x: 40 requestor lines
>>  - for pxa27x: 75 requestor lines
>>  - for pxa3xx: 100 requestor lines
>> 
>> The previous testing did not reveal the faulty constant as on pxa[23]xx
>> platforms, only camera, MSL and USB are above requestor 32, and in these
>> only the camera has a driver using dma.
>> 
>> Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case")
>> Signed-off-by: Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>
>
> Acked-by: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>
> Which tree is this targetted thru?
PXA for-next tree, my tree, once I gather the acks.

Cheers.

-- 
Robert
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line

[Robert Jarzmik]

Robert Jarzmik <robert.jarzmik@free.fr> writes:

> Vinod Koul <vinod.koul@intel.com> writes:
>
>> On Mon, Feb 15, 2016 at 09:57:48PM +0100, Robert Jarzmik wrote:
>>> The current number of requestor lines is limited to 31. This was an
>>> error of a previous commit, as this number is platform dependent, and is
>>> actually :
>>>  - for pxa25x: 40 requestor lines
>>>  - for pxa27x: 75 requestor lines
>>>  - for pxa3xx: 100 requestor lines
>>> 
>>> The previous testing did not reveal the faulty constant as on pxa[23]xx
>>> platforms, only camera, MSL and USB are above requestor 32, and in these
>>> only the camera has a driver using dma.
>>> 
>>> Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case")
>>> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
>>
>> Acked-by: Vinod Koul <vinod.koul@intel.com>
>>
>> Which tree is this targetted thru?
> PXA for-next tree, my tree, once I gather the acks.
>
> Cheers.

Queued into pxa/for-next, thanks.

-- 
Robert

Re: [PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation

[Rob Herring]

On Mon, Feb 15, 2016 at 09:57:45PM +0100, Robert Jarzmik wrote:
> For pxa based platforms, the number of requestor lines should be
> specified, so that the driver can check if the flow control should be
> activated (when a requestor line is asked for) or not.
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> ---
> Since v1: rename of property to #dma-requests
>       	  modify default value to 32 as suggested by Vinod
> ---
>  Documentation/devicetree/bindings/dma/mmp-dma.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>