Re: [PATCH] arm64: dt marvell: extend AP806 system controller size

[Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

Hi Baruch,
 
 On ven., sept. 15 2017, Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org> wrote:

> Extend the container size to 0x2000 to include the gpio controller at
> offset 0x1040.
>
> While at it, add start address notation to the gpio node name to match
> its 'offset' property.
>
> Signed-off-by: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>

I made a quick test on a mcbin and I confirm that the watchdog is here
and usable.

Tested-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
and 
Applied on mvebu/dt64

Thanks,

Gregory

> ---
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 4d360713ed12..30d48ecf46e0 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -254,7 +254,7 @@
>  
>  			ap_syscon: system-controller@6f4000 {
>  				compatible = "syscon", "simple-mfd";
> -				reg = <0x6f4000 0x1000>;
> +				reg = <0x6f4000 0x2000>;
>  
>  				ap_clk: clock {
>  					compatible = "marvell,ap806-clock";
> @@ -265,7 +265,7 @@
>  					compatible = "marvell,ap806-pinctrl";
>  				};
>  
> -				ap_gpio: gpio {
> +				ap_gpio: gpio@1040 {
>  					compatible = "marvell,armada-8k-gpio";
>  					offset = <0x1040>;
>  					ngpios = <20>;
> -- 
> 2.14.1
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html