Re: [PATCH] dt-bindings: serial: Convert cnxt,cx92755-usart to DT schema

[Baruch Siach <baruch@tkos.co.il>]

Hi Rob,

On Tue, May 06 2025, Rob Herring (Arm) wrote:

> Convert the Conexant Digicolor USART binding to DT schema. It is a
> straight-forward conversion.
>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Acked-by: Baruch Siach <baruch@tkos.co.il>

Thanks,
baruch

> ---
>  .../bindings/serial/cnxt,cx92755-usart.yaml   | 48 +++++++++++++++++++
>  .../bindings/serial/digicolor-usart.txt       | 27 -----------
>  2 files changed, 48 insertions(+), 27 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/serial/cnxt,cx92755-usart.yaml
>  delete mode 100644 Documentation/devicetree/bindings/serial/digicolor-usart.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/cnxt,cx92755-usart.yaml
> b/Documentation/devicetree/bindings/serial/cnxt,cx92755-usart.yaml
> new file mode 100644
> index 000000000000..720229455330
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/cnxt,cx92755-usart.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/cnxt,cx92755-usart.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Conexant Digicolor USART
> +
> +maintainers:
> +  - Baruch Siach <baruch@tkos.co.il>
> +
> +description: >
> +  Note: this binding is only applicable for using the USART peripheral as UART.
> +  USART also support synchronous serial protocols like SPI and I2S.
> +  Use the binding that matches the wiring of your system.
> +
> +allOf:
> +  - $ref: /schemas/serial/serial.yaml#
> +
> +properties:
> +  compatible:
> +    const: cnxt,cx92755-usart
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    serial@f0000740 {
> +        compatible = "cnxt,cx92755-usart";
> +        reg = <0xf0000740 0x20>;
> +        clocks = <&main_clk>;
> +        interrupts = <44>;
> +    };
> diff --git a/Documentation/devicetree/bindings/serial/digicolor-usart.txt
> b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
> deleted file mode 100644
> index 2d3ede66889d..000000000000
> --- a/Documentation/devicetree/bindings/serial/digicolor-usart.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -Binding for Conexant Digicolor USART
> -
> -Note: this binding is only applicable for using the USART peripheral as
> -UART. USART also support synchronous serial protocols like SPI and I2S. Use
> -the binding that matches the wiring of your system.
> -
> -Required properties:
> -- compatible : should be "cnxt,cx92755-usart".
> -- reg: Should contain USART controller registers location and length.
> -- interrupts: Should contain a single USART controller interrupt.
> -- clocks: Must contain phandles to the USART clock
> -  See ../clocks/clock-bindings.txt for details.
> -
> -Note: Each UART port should have an alias correctly numbered
> -in "aliases" node.
> -
> -Example:
> -	aliases {
> -		serial0 = &uart0;
> -	};
> -
> -	uart0: uart@f0000740 {
> -		compatible = "cnxt,cx92755-usart";
> -		reg = <0xf0000740 0x20>;
> -		clocks = <&main_clk>;
> -		interrupts = <44>;
> -	};

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -