From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory CLEMENT Subject: Re: [PATCH v2 02/10] usb: host: xhci: mvebu: add reset on resume quirk Date: Fri, 18 Jan 2019 17:04:01 +0100 Message-ID: <878szilzpq.fsf@FE-laptop> References: <20190111133133.24803-1-miquel.raynal@bootlin.com> <20190111133133.24803-3-miquel.raynal@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190111133133.24803-3-miquel.raynal@bootlin.com> (Miquel Raynal's message of "Fri, 11 Jan 2019 14:31:25 +0100") List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Miquel Raynal Cc: Mark Rutland , Andrew Lunn , Jason Cooper , Mathias Nyman , devicetree@vger.kernel.org, Antoine Tenart , Greg Kroah-Hartman , linux-usb@vger.kernel.org, Kishon Vijay Abraham I , Nadav Haklai , Rob Herring , Alan Stern , Thomas Petazzoni , Maxime Chevallier , Ofer Heifetz , linux-arm-kernel@lists.infradead.org, Sebastian Hesselbarth List-Id: devicetree@vger.kernel.org Hi Miquel, On ven., janv. 11 2019, Miquel Raynal wrote: > From: Ofer Heifetz > > The mvebu xHCI host driver does not have suspend/resume support. Use of > the XHCI_RESET_ON_RESUME quirk is mandatory in order to avoid failures > after resume. This will work only if no USB device is plugged-in. > > While at it, mention in the Kconfig file that this IP is also present > on the A3700 SoC. > > Signed-off-by: Ofer Heifetz > [miquel.raynal@bootlin.com: Reword the commit message] > Signed-off-by: Miquel Raynal > --- > drivers/usb/host/Kconfig | 4 ++-- > drivers/usb/host/xhci-mvebu.c | 11 +++++++++++ > drivers/usb/host/xhci-mvebu.h | 6 ++++++ > drivers/usb/host/xhci-plat.c | 7 +++++++ > 4 files changed, 26 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 16758b12a5e9..13d59be6a6aa 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -69,13 +69,13 @@ config USB_XHCI_MTK > If unsure, say N. > > config USB_XHCI_MVEBU > - tristate "xHCI support for Marvell Armada 375/38x" > + tristate "xHCI support for Marvell Armada 375/38x/3700" I would name it 37xx to be consistent with 38x > select USB_XHCI_PLATFORM > depends on HAS_IOMEM > depends on ARCH_MVEBU || COMPILE_TEST > ---help--- > Say 'Y' to enable the support for the xHCI host controller > - found in Marvell Armada 375/38x ARM SOCs. > + found in Marvell Armada 375/38x/3700 ARM SOCs. same here > > config USB_XHCI_RCAR > tristate "xHCI support for Renesas R-Car SoCs" > diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c > index 32e158568788..60651a50770f 100644 > --- a/drivers/usb/host/xhci-mvebu.c > +++ b/drivers/usb/host/xhci-mvebu.c > @@ -13,6 +13,7 @@ > #include > > #include "xhci-mvebu.h" > +#include "xhci.h" > > #define USB3_MAX_WINDOWS 4 > #define USB3_WIN_CTRL(w) (0x0 + ((w) * 8)) > @@ -72,3 +73,13 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) > > return 0; > } > + > +int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) > +{ > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > + > + /* Without reset on resume, the HC won't work at all */ > + xhci->quirks |= XHCI_RESET_ON_RESUME; > + > + return 0; > +} > diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h > index 09791df2cec0..ca0a3a5721dd 100644 > --- a/drivers/usb/host/xhci-mvebu.h > +++ b/drivers/usb/host/xhci-mvebu.h > @@ -12,10 +12,16 @@ struct usb_hcd; > > #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) > int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); > +int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); > #else > static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) > { > return 0; > } > + > +static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) > +{ > + return 0; > +} > #endif > #endif /* __LINUX_XHCI_MVEBU_H */ > diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c > index ef09cb06212f..0ac4ec975547 100644 > --- a/drivers/usb/host/xhci-plat.c > +++ b/drivers/usb/host/xhci-plat.c > @@ -98,6 +98,10 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = { > .init_quirk = xhci_mvebu_mbus_init_quirk, > }; > > +static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { > + .init_quirk = xhci_mvebu_a3700_init_quirk, > +}; > + > static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { > .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, > .init_quirk = xhci_rcar_init_quirk, > @@ -123,6 +127,9 @@ static const struct of_device_id usb_xhci_of_match[] = { > }, { > .compatible = "marvell,armada-380-xhci", > .data = &xhci_plat_marvell_armada, > + }, { > + .compatible = "marvell,armada3700-xhci", > + .data = &xhci_plat_marvell_armada3700, Reviewed-by: Gregory CLEMENT Thanks, Gregory -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com