Re: [PATCH mvebu-dt v3 0/7] Turris Omnia device-tree changes

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Hello Marek,

> Hi Gregory,
>
> v3 of series with changes for Turris Omnia device tree.

I applied the full series on mvebu/dt

Thanks,

Gregory


>
> Changes since v2 (mostly thanks to Andreas):
> - fixed typo in 2/7
> - updated comment in 4/7 (describing current SFP cage binding status)
> - changed commit message in 4/7 a little bit
> - changed LED_FUNCTION_DEBUG to LED_FUNCTION_INDICATOR in 5/7
> - updated comment about LED controller in 5/7
> - added 7/7 which removes 2 unneeded status = "okay"
>
> Changes since v1:
> - added patch which adds description for switch interrupt
> - removed patch adding ethernet-phy interrupt: the PHY interrupt is
>   asserted by level low, but the GPIO expander driver supports only
>   edge rising/falling, and even then it may not be correct when an
>   interrupt storm occurs. So keep polling the PHY
> - added Andrew's Reviewed-by tags
>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
> Cc: Andreas Färber <afaerber@suse.de>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
>
> Marek Behún (7):
>   ARM: dts: turris-omnia: enable HW buffer management
>   ARM: dts: turris-omnia: add comphy handle to eth2
>   ARM: dts: turris-omnia: describe switch interrupt
>   ARM: dts: turris-omnia: add SFP node
>   ARM: dts: turris-omnia: add LED controller node
>   ARM: dts: turris-omnia: update ethernet-phy node and handle name
>   ARM: dts: turris-omnia: remove unneeded status = "okay" properties
>
>  arch/arm/boot/dts/armada-385-turris-omnia.dts | 178 +++++++++++++++++-
>  1 file changed, 170 insertions(+), 8 deletions(-)
>
> -- 
> 2.26.2
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com