From: Gabriel Krisman Bertazi <krisman@collabora.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Shreeya Patel <shreeya.patel@collabora.com>,
lars@metafoo.de, robh+dt@kernel.org, Zhigang.Shi@liteon.com,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel@collabora.com,
alvaro.soliverez@collabora.com
Subject: Re: [PATCH 2/3] dt-bindings: Document ltrf216a light sensor bindings
Date: Sun, 27 Mar 2022 22:49:20 -0400 [thread overview]
Message-ID: <87czi6ssen.fsf@collabora.com> (raw)
In-Reply-To: <20220327145511.2d36dd10@jic23-huawei> (Jonathan Cameron's message of "Sun, 27 Mar 2022 14:55:11 +0100")
Jonathan Cameron <jic23@kernel.org> writes:
> On Fri, 25 Mar 2022 16:00:13 +0530
> Shreeya Patel <shreeya.patel@collabora.com> wrote:
>
>> Add devicetree bindings for ltrf216a ambient light sensor
>>
>> Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
> Hi Shreeya,
>
> As we are making this Zhigang Shi's problem to maintain, I'm
> looking for an ack. Bit mean otherwise :)
Alternatively, Shreeya could take over the maintainership of this
schema, since she wrote it. :)
>
> Except for the deprecated part this could just have gone in
> trivial-bindings.yaml.
>
> I guess you don't need it for your existing board, but best
> practice would probably include ensuring whatever supplies
> the device needs are here so that platforms that don't enable
> them by default can turn them on.
>
> Also, there is an interrupt according to the datasheet linked
> from patch 3 and that should definitely be in the binding
> even if the driver isn't using it.
>
> Jonathan
>
>
>> ---
>> .../bindings/iio/light/liteon,ltrf216a.yaml | 42 +++++++++++++++++++
>> 1 file changed, 42 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
>> new file mode 100644
>> index 000000000000..275d86a0353a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
>> @@ -0,0 +1,42 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: LTRF216A Ambient Light Sensor
>> +
>> +maintainers:
>> + - Zhigang Shi <Zhigang.Shi@liteon.com>
>> +
>> +description: |
>> + Ambient sensing with an i2c interface.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - liteon,ltrf216a
>> + - ltr,ltrf216a
>> +
>> + reg:
>> + maxItems: 1
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + i2c {
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + light-sensor@53 {
>> + compatible = "ltr,ltrf216a";
>> + reg = <0x53>;
>> + };
>> + };
>> +...
>
--
Gabriel Krisman Bertazi
next prev parent reply other threads:[~2022-03-28 2:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-25 10:30 [PATCH 0/3] Add LTRF216A Driver Shreeya Patel
2022-03-25 10:30 ` [PATCH 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix Shreeya Patel
2022-03-25 12:21 ` Krzysztof Kozlowski
2022-03-25 10:30 ` [PATCH 2/3] dt-bindings: Document ltrf216a light sensor bindings Shreeya Patel
2022-03-25 12:23 ` Krzysztof Kozlowski
2022-03-27 13:55 ` Jonathan Cameron
2022-03-28 2:49 ` Gabriel Krisman Bertazi [this message]
2022-03-25 10:30 ` [PATCH 3/3] iio: light: Add support for ltrf216a sensor Shreeya Patel
2022-03-25 12:25 ` Krzysztof Kozlowski
2022-03-27 14:30 ` Jonathan Cameron
2022-03-29 20:03 ` Shreeya Patel
2022-04-02 16:49 ` Jonathan Cameron
2022-04-11 17:06 ` Shreeya Patel
2022-04-12 14:06 ` Gabriel Krisman Bertazi
2022-04-12 14:53 ` Jonathan Cameron
2022-03-28 3:59 ` Gabriel Krisman Bertazi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87czi6ssen.fsf@collabora.com \
--to=krisman@collabora.com \
--cc=Zhigang.Shi@liteon.com \
--cc=alvaro.soliverez@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=kernel@collabora.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shreeya.patel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).