[PATCH v2 08/10] arm64: dts: renesas: r8a77961: Add HDMI device nodes

[Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch adds HDMI device nodes for R-Car M3-W+ (r8a77961) SoC.
This patch was tested on R-Car M3-W+ Salvator-XS board.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a77961.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index c7fabd9e875b..7f21491f6436 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -2145,14 +2145,23 @@ port@1 {
 		};
 
 		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a77961-hdmi", "renesas,rcar-gen3-hdmi";
 			reg = <0 0xfead0000 0 0x10000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A77961_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
 
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				port@0 {
 					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
 				};
 				port@1 {
 					reg = <1>;
@@ -2191,6 +2200,7 @@ du_out_rgb: endpoint {
 				port@1 {
 					reg = <1>;
 					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
 					};
 				};
 				port@2 {
-- 
2.25.1