[PATCH v4 0/4] Add GPIO interrupt support for Amlogic A4 and A5 SoCs

[PATCH v4 0/4] Add GPIO interrupt support for Amlogic A4 and A5 SoCs

[Xianwei Zhao via B4 Relay]

This patch adds GPIO interrupt support for Amlogic A4 and A5 SoCs

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
Changes in v4:
- Make minor changes for bindings as Conor and Rob suggest.
- Format adjustment of source code according to Thomas's suggestion.
- Link to v3: https://lore.kernel.org/r/20250305-irqchip-gpio-a4-a5-v3-0-1eec70352fea@amlogic.com

Changes in v3:
- Fix warning when run 'make ARCH=arm64 dtbs_check'.
- Fix warning when run 'make ARCH=arm64 Image W=1'.
- Rebase file amlogic-a4.dtsi.
- Link to v2: https://lore.kernel.org/r/20250226-irqchip-gpio-a4-a5-v2-0-c55b1050cb55@amlogic.com

Changes in v2:
- Use if/then instead of direct modification minimum value for property 'amlogic,channel-interrupts'.
- Add register offsets to the parameter structure to reduce definition of a function.
- Link to v1: https://lore.kernel.org/r/20250219-irqchip-gpio-a4-a5-v1-0-3c8e44ae42df@amlogic.com

---
Xianwei Zhao (4):
      dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
      irqchip: Add support for Amlogic A4 and A5 SoCs
      arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
      arm64: dts: Add gpio_intc node for Amlogic A5 SoCs

 .../amlogic,meson-gpio-intc.yaml                   | 19 ++++++++-
 arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi        | 19 +++++++++
 arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi        | 12 ++++++
 drivers/irqchip/irq-meson-gpio.c                   | 45 +++++++++++++++++-----
 4 files changed, 85 insertions(+), 10 deletions(-)
---
base-commit: 73e4ffb27bb8a093d557bb2dac1a271474cca99c
change-id: 20241213-irqchip-gpio-a4-a5-80c50a1456c4

Best regards,
-- 
Xianwei Zhao <xianwei.zhao@amlogic.com>

[PATCH v4 1/4] dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Update dt-binding document for GPIO interrupt controller
of Amlogic A4 and A5 SoCs

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 .../interrupt-controller/amlogic,meson-gpio-intc.yaml | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
index a93744763787..3d60d9e9e208 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -35,6 +35,9 @@ properties:
               - amlogic,meson-sm1-gpio-intc
               - amlogic,meson-a1-gpio-intc
               - amlogic,meson-s4-gpio-intc
+              - amlogic,a4-gpio-intc
+              - amlogic,a4-gpio-ao-intc
+              - amlogic,a5-gpio-intc
               - amlogic,c3-gpio-intc
               - amlogic,t7-gpio-intc
           - const: amlogic,meson-gpio-intc
@@ -49,7 +52,7 @@ properties:
 
   amlogic,channel-interrupts:
     description: Array with the upstream hwirq numbers
-    minItems: 8
+    minItems: 2
     maxItems: 12
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
@@ -60,6 +63,20 @@ required:
   - "#interrupt-cells"
   - amlogic,channel-interrupts
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: amlogic,a4-gpio-ao-intc
+then:
+  properties:
+    amlogic,channel-interrupts:
+      maxItems: 2
+else:
+  properties:
+    amlogic,channel-interrupts:
+      minItems: 8
+
 additionalProperties: false
 
 examples:

-- 
2.37.1

Re: [PATCH v4 1/4] dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 2050 bytes --]

On Fri, Mar 07, 2025 at 04:49:22PM +0800, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
> 
> Update dt-binding document for GPIO interrupt controller
> of Amlogic A4 and A5 SoCs
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

> ---
>  .../interrupt-controller/amlogic,meson-gpio-intc.yaml | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
> index a93744763787..3d60d9e9e208 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
> @@ -35,6 +35,9 @@ properties:
>                - amlogic,meson-sm1-gpio-intc
>                - amlogic,meson-a1-gpio-intc
>                - amlogic,meson-s4-gpio-intc
> +              - amlogic,a4-gpio-intc
> +              - amlogic,a4-gpio-ao-intc
> +              - amlogic,a5-gpio-intc
>                - amlogic,c3-gpio-intc
>                - amlogic,t7-gpio-intc
>            - const: amlogic,meson-gpio-intc
> @@ -49,7 +52,7 @@ properties:
>  
>    amlogic,channel-interrupts:
>      description: Array with the upstream hwirq numbers
> -    minItems: 8
> +    minItems: 2
>      maxItems: 12
>      $ref: /schemas/types.yaml#/definitions/uint32-array
>  
> @@ -60,6 +63,20 @@ required:
>    - "#interrupt-cells"
>    - amlogic,channel-interrupts
>  
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        const: amlogic,a4-gpio-ao-intc
> +then:
> +  properties:
> +    amlogic,channel-interrupts:
> +      maxItems: 2
> +else:
> +  properties:
> +    amlogic,channel-interrupts:
> +      minItems: 8
> +
>  additionalProperties: false
>  
>  examples:
> 
> -- 
> 2.37.1
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v4 2/4] irqchip: Add support for Amlogic A4 and A5 SoCs

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao@amlogic.com>

The Amlogic A4 SoCs support 12 GPIO IRQ lines and 2 AO GPIO IRQ lines,
A5 SoCs support 12 GPIO IRQ lines, details are as below.

A4 IRQ Number:
- 72:55   18 pins on bank T
- 54:32   23 pins on bank X
- 31:16   16 pins on bank D
- 15:14    2 pins on bank E
- 13:0    14 pins on bank B

A4 AO IRQ Number:
- 7       1 pin  on bank TESTN
- 6:0     7 pins on bank AO

A5 IRQ Number:
- 98      1 pin  on bank TESTN
- 97:82   16 pins on bank Z
- 81:62   20 pins on bank X
- 61:48   14 pins on bank T
- 47:32   16 pins on bank D
- 31:27    5 pins on bank H
- 26:25    2 pins on bank E
- 24:14   11 pins on bank C
- 13:0    14 pins on bank B

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 drivers/irqchip/irq-meson-gpio.c | 45 ++++++++++++++++++++++++++++++++--------
 1 file changed, 36 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index cd789fa51519..e0265d24e3e3 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -26,8 +26,6 @@
 
 /* use for A1 like chips */
 #define REG_PIN_A1_SEL	0x04
-/* Used for s4 chips */
-#define REG_EDGE_POL_S4	0x1c
 
 /*
  * Note: The S905X3 datasheet reports that BOTH_EDGE is controlled by
@@ -72,6 +70,7 @@ struct meson_gpio_irq_params {
 	bool support_edge_both;
 	unsigned int edge_both_offset;
 	unsigned int edge_single_offset;
+	unsigned int edge_pol_reg;
 	unsigned int pol_low_offset;
 	unsigned int pin_sel_mask;
 	struct irq_ctl_ops ops;
@@ -105,6 +104,18 @@ struct meson_gpio_irq_params {
 	.pin_sel_mask = 0x7f,					\
 	.nr_channels = 8,					\
 
+#define INIT_MESON_A4_AO_COMMON_DATA(irqs)			\
+	INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init,		\
+			  meson_a1_gpio_irq_sel_pin,		\
+			  meson_s4_gpio_irq_set_type)		\
+	.support_edge_both = true,				\
+	.edge_both_offset = 0,					\
+	.edge_single_offset = 12,				\
+	.edge_pol_reg = 0x8,					\
+	.pol_low_offset = 0,					\
+	.pin_sel_mask = 0xff,					\
+	.nr_channels = 2,					\
+
 #define INIT_MESON_S4_COMMON_DATA(irqs)				\
 	INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init,		\
 			  meson_a1_gpio_irq_sel_pin,		\
@@ -112,6 +123,7 @@ struct meson_gpio_irq_params {
 	.support_edge_both = true,				\
 	.edge_both_offset = 0,					\
 	.edge_single_offset = 12,				\
+	.edge_pol_reg = 0x1c,					\
 	.pol_low_offset = 0,					\
 	.pin_sel_mask = 0xff,					\
 	.nr_channels = 12,					\
@@ -146,6 +158,18 @@ static const struct meson_gpio_irq_params a1_params = {
 	INIT_MESON_A1_COMMON_DATA(62)
 };
 
+static const struct meson_gpio_irq_params a4_params = {
+	INIT_MESON_S4_COMMON_DATA(81)
+};
+
+static const struct meson_gpio_irq_params a4_ao_params = {
+	INIT_MESON_A4_AO_COMMON_DATA(8)
+};
+
+static const struct meson_gpio_irq_params a5_params = {
+	INIT_MESON_S4_COMMON_DATA(99)
+};
+
 static const struct meson_gpio_irq_params s4_params = {
 	INIT_MESON_S4_COMMON_DATA(82)
 };
@@ -168,6 +192,9 @@ static const struct of_device_id meson_irq_gpio_matches[] __maybe_unused = {
 	{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
 	{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
 	{ .compatible = "amlogic,meson-s4-gpio-intc", .data = &s4_params },
+	{ .compatible = "amlogic,a4-gpio-ao-intc", .data = &a4_ao_params },
+	{ .compatible = "amlogic,a4-gpio-intc", .data = &a4_params },
+	{ .compatible = "amlogic,a5-gpio-intc", .data = &a5_params },
 	{ .compatible = "amlogic,c3-gpio-intc", .data = &c3_params },
 	{ .compatible = "amlogic,t7-gpio-intc", .data = &t7_params },
 	{ }
@@ -299,11 +326,10 @@ meson_gpio_irq_release_channel(struct meson_gpio_irq_controller *ctl,
 static int meson8_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
 				    unsigned int type, u32 *channel_hwirq)
 {
-	u32 val = 0;
+	const struct meson_gpio_irq_params *params = ctl->params;
 	unsigned int idx;
-	const struct meson_gpio_irq_params *params;
+	u32 val = 0;
 
-	params = ctl->params;
 	idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
 
 	/*
@@ -356,18 +382,19 @@ static int meson8_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
 static int meson_s4_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
 				      unsigned int type, u32 *channel_hwirq)
 {
-	u32 val = 0;
+	const struct meson_gpio_irq_params *params = ctl->params;
 	unsigned int idx;
+	u32 val = 0;
 
 	idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
 
 	type &= IRQ_TYPE_SENSE_MASK;
 
-	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4, BIT(idx), 0);
+	meson_gpio_irq_update_bits(ctl, params->edge_pol_reg, BIT(idx), 0);
 
 	if (type == IRQ_TYPE_EDGE_BOTH) {
 		val |= BIT(ctl->params->edge_both_offset + idx);
-		meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4,
+		meson_gpio_irq_update_bits(ctl, params->edge_pol_reg,
 					   BIT(ctl->params->edge_both_offset + idx), val);
 		return 0;
 	}
@@ -378,7 +405,7 @@ static int meson_s4_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
 		val |= BIT(ctl->params->edge_single_offset + idx);
 
-	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
+	meson_gpio_irq_update_bits(ctl, params->edge_pol_reg,
 				   BIT(idx) | BIT(12 + idx), val);
 	return 0;
 };

-- 
2.37.1

Re: [PATCH v4 2/4] irqchip: Add support for Amlogic A4 and A5 SoCs

[Thomas Gleixner]

On Fri, Mar 07 2025 at 16:49, Xianwei Zhao via wrote:
>  
>  	if (type == IRQ_TYPE_EDGE_BOTH) {
>  		val |= BIT(ctl->params->edge_both_offset + idx);

Not new, but this really should be 'val = ...'

> -		meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4,
> +		meson_gpio_irq_update_bits(ctl, params->edge_pol_reg,
>  					   BIT(ctl->params->edge_both_offset + idx), val);

and this BIT() calculation is obviously redundant as it is the same as @val.

Would be nice to have that cleaned up.

With that fixed:

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH v4 3/4] arm64: dts: Add gpio_intc node for Amlogic A4 SoCs

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Add GPIO interrupt controller device.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index efba8565af3c..fa80fa365f13 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -51,6 +51,25 @@ pwrc: power-controller {
 };
 
 &apb {
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a4-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+
+	gpio_ao_intc: interrupt-controller@8e72c {
+		compatible = "amlogic,a4-gpio-ao-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x8e72c 0x0 0x0c>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts = <140 141>;
+	};
+
 	periphs_pinctrl: pinctrl {
 		compatible = "amlogic,pinctrl-a4";
 		#address-cells = <2>;

-- 
2.37.1

[PATCH v4 4/4] arm64: dts: Add gpio_intc node for Amlogic A5 SoCs

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Add GPIO interrupt controller device.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
index 17a6316de891..32ed1776891b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
@@ -48,3 +48,15 @@ pwrc: power-controller {
 		};
 	};
 };
+
+&apb {
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a5-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+};

-- 
2.37.1

Re: [PATCH v4 0/4] Add GPIO interrupt support for Amlogic A4 and A5 SoCs

[Thomas Gleixner]

On Fri, Mar 07 2025 at 16:49, Xianwei Zhao via wrote:
> Xianwei Zhao (4):
>       dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
>       irqchip: Add support for Amlogic A4 and A5 SoCs
>       arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
>       arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
>
>  .../amlogic,meson-gpio-intc.yaml                   | 19 ++++++++-
>  arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi        | 19 +++++++++
>  arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi        | 12 ++++++
>  drivers/irqchip/irq-meson-gpio.c                   | 45 +++++++++++++++++-----

I can't take that through the irqchip tree as the amlogic dtsi files are
new and in Neil's for-next branch.

Neil, feel free to pick the lot up, I don't have conflicting changes for
that driver sitting in my tree. I'll reply to the irqchip patch seperately.

Thanks,

        tglx

Re: [PATCH v4 0/4] Add GPIO interrupt support for Amlogic A4 and A5 SoCs

[Neil Armstrong]

Hi,

On 10/03/2025 18:56, Thomas Gleixner wrote:
> On Fri, Mar 07 2025 at 16:49, Xianwei Zhao via wrote:
>> Xianwei Zhao (4):
>>        dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
>>        irqchip: Add support for Amlogic A4 and A5 SoCs
>>        arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
>>        arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
>>
>>   .../amlogic,meson-gpio-intc.yaml                   | 19 ++++++++-
>>   arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi        | 19 +++++++++
>>   arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi        | 12 ++++++
>>   drivers/irqchip/irq-meson-gpio.c                   | 45 +++++++++++++++++-----
> 
> I can't take that through the irqchip tree as the amlogic dtsi files are
> new and in Neil's for-next branch.
> 
> Neil, feel free to pick the lot up, I don't have conflicting changes for
> that driver sitting in my tree. I'll reply to the irqchip patch seperately.

Ack, I'll pick the whole serie in my tree.

Thx,
Neil

> 
> Thanks,
> 
>          tglx