From: Baruch Siach <baruch@tkos.co.il>
To: Rob Herring <robh@kernel.org>
Cc: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
linux-arm-kernel@lists.infradead.org,
"Robert Marko" <robert.marko@sartura.hr>,
linux-pwm@vger.kernel.org,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
devicetree@vger.kernel.org,
"Kathiravan T" <kathirav@codeaurora.org>,
linux-arm-msm@vger.kernel.org,
"Balaji Prakash J" <bjagadee@codeaurora.org>
Subject: Re: [PATCH v9 2/3] dt-bindings: pwm: add IPQ6018 binding
Date: Wed, 01 Dec 2021 06:49:24 +0200 [thread overview]
Message-ID: <87ee6wgc0b.fsf@tarshish> (raw)
In-Reply-To: <1638304586.245688.2968346.nullmailer@robh.at.kernel.org>
Hi Rob,
On Tue, Nov 30 2021, Rob Herring wrote:
> On Tue, 30 Nov 2021 19:37:29 +0200, Baruch Siach wrote:
>> DT binding for the PWM block in Qualcomm IPQ6018 SoC.
>>
>> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
>> ---
>>
>> v9:
>>
>> Add 'ranges' property to example (Rob)
>>
>> Drop label in example (Rob)
>>
>> v8:
>>
>> Add size cell to 'reg' (Rob)
>>
>> v7:
>>
>> Use 'reg' instead of 'offset' (Rob)
>>
>> Drop 'clock-names' and 'assigned-clock*' (Bjorn)
>>
>> Use single cell address/size in example node (Bjorn)
>>
>> Move '#pwm-cells' lower in example node (Bjorn)
>>
>> List 'reg' as required
>>
>> v6:
>>
>> Device node is child of TCSR; remove phandle (Rob Herring)
>>
>> Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König)
>>
>> v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn
>> Andersson, Kathiravan T)
>>
>> v4: Update the binding example node as well (Rob Herring's bot)
>>
>> v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
>>
>> v2: Make #pwm-cells const (Rob Herring)
>> ---
>> .../devicetree/bindings/pwm/ipq-pwm.yaml | 53 +++++++++++++++++++
>> 1 file changed, 53 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/pwm/ipq-pwm.example.dt.yaml:0:0:
> /example-0/syscon@1937000: failed to match any schema with compatible:
> ['qcom,tcsr-ipq6018', 'syscon', 'simple-mfd']
My previous submission[1] had this text above the patch changelog:
---
This series does not convert the TCSR binding documentation to YAML. As
a result, this commit adds new a dt_binding_check warning:
/example-0/syscon@1937000: failed to match any schema with compatible: ['qcom,tcsr-ipq 6018', 'syscon', 'simple-mfd']
If that is a blocker to IPQ6018 PWM support, so be it. Patches will wait
for someone else to push them further.
---
This time I missed the 'DT_CHECKER_FLAGS=-m' part so I didn't see the
error.
Thanks for the reminder,
baruch
[1] https://lore.kernel.org/all/8238dfb5d5e4a40a995f047db36d9a7240431de5.1630323987.git.baruch@tkos.co.il/
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/patch/1561766
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
next prev parent reply other threads:[~2021-12-01 4:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-30 17:37 [PATCH v9 1/3] pwm: driver for qualcomm ipq6018 pwm block Baruch Siach
2021-11-30 17:37 ` [PATCH v9 2/3] dt-bindings: pwm: add IPQ6018 binding Baruch Siach
2021-11-30 20:36 ` Rob Herring
2021-12-01 4:49 ` Baruch Siach [this message]
2021-12-01 16:07 ` Rob Herring
2021-11-30 17:37 ` [PATCH v9 3/3] arm64: dts: ipq6018: add pwm node Baruch Siach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ee6wgc0b.fsf@tarshish \
--to=baruch@tkos.co.il \
--cc=agross@kernel.org \
--cc=bjagadee@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kathirav@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robert.marko@sartura.hr \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).