* [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups
@ 2024-07-01 14:56 Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 1/7] ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings Krzysztof Kozlowski
` (7 more replies)
0 siblings, 8 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 14:56 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
Few cleanups reported by dtbs_check.
Best regards,
Krzysztof
---
Krzysztof Kozlowski (7):
ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings
ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys
ARM: dts: marvell: kirkwood: align LED node name with bindings
ARM: dts: marvell: orion: align GPIO keys node name with bindings
ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys
ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs
ARM: dts: marvell: orion: align LED node name with bindings
.../dts/marvell/kirkwood-blackarmor-nas220.dts | 6 +--
arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts | 8 +--
arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts | 8 ++-
arch/arm/boot/dts/marvell/kirkwood-d2net.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-dir665.dts | 22 ++++----
arch/arm/boot/dts/marvell/kirkwood-dns320.dts | 10 ++--
arch/arm/boot/dts/marvell/kirkwood-dns325.dts | 10 ++--
arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi | 8 ++-
arch/arm/boot/dts/marvell/kirkwood-dockstar.dts | 4 +-
arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts | 6 +--
arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts | 20 ++++----
.../dts/marvell/kirkwood-guruplug-server-plus.dts | 8 +--
arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts | 12 ++---
arch/arm/boot/dts/marvell/kirkwood-iconnect.dts | 20 ++++----
.../boot/dts/marvell/kirkwood-iomega_ix2_200.dts | 16 +++---
arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 20 ++++----
arch/arm/boot/dts/marvell/kirkwood-laplug.dts | 6 +--
.../arm/boot/dts/marvell/kirkwood-linkstation.dtsi | 2 -
.../boot/dts/marvell/kirkwood-linksys-viper.dts | 10 ++--
arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi | 18 +++----
arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts | 12 ++---
.../boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts | 12 ++---
arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi | 8 ++-
arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi | 6 +--
arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-nsa310.dts | 20 ++++----
arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts | 18 +++----
arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts | 8 ++-
arch/arm/boot/dts/marvell/kirkwood-nsa320.dts | 18 +++----
arch/arm/boot/dts/marvell/kirkwood-nsa325.dts | 18 +++----
.../boot/dts/marvell/kirkwood-nsa3x0-common.dtsi | 8 ++-
.../boot/dts/marvell/kirkwood-openblocks_a6.dts | 4 +-
.../boot/dts/marvell/kirkwood-openblocks_a7.dts | 2 -
arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts | 4 +-
.../dts/marvell/kirkwood-pogoplug-series-4.dts | 8 ++-
.../boot/dts/marvell/kirkwood-sheevaplug-esata.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts | 4 +-
arch/arm/boot/dts/marvell/kirkwood-synology.dtsi | 58 +++++++++++-----------
arch/arm/boot/dts/marvell/kirkwood-t5325.dts | 4 +-
arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts | 6 +--
arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts | 6 +--
arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi | 6 +--
.../dts/marvell/mvebu-linkstation-gpio-simple.dtsi | 2 -
.../boot/dts/marvell/orion5x-lacie-d2-network.dts | 9 ++--
.../orion5x-lacie-ethernet-disk-mini-v2.dts | 7 ++-
.../boot/dts/marvell/orion5x-linkstation-lschl.dts | 4 +-
arch/arm/boot/dts/marvell/orion5x-lswsgl.dts | 25 +++++-----
.../marvell/orion5x-maxtor-shared-storage-2.dts | 7 ++-
.../boot/dts/marvell/orion5x-netgear-wnr854t.dts | 2 +-
.../arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts | 2 +-
50 files changed, 230 insertions(+), 278 deletions(-)
---
base-commit: 9c9a5aa3a60dc9e1e2448c29f346385914052642
change-id: 20240701-dts-marvell-cleanup-1c9fcf6ae439
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/7] ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
@ 2024-07-01 14:56 ` Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 2/7] ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys Krzysztof Kozlowski
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 14:56 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
Bindings expect the GPIO key node names to follow certain pattern, see
dtbs_check warnings:
kirkwood-laplug.dtb: gpio_keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts | 8 ++++----
arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-dir665.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi | 6 +++---
arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-iconnect.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts | 6 +++---
arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-laplug.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi | 6 +++---
arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi | 6 +++---
arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi | 2 +-
arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts | 6 +++---
arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi | 6 +++---
arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-t5325.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts | 4 ++--
arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi | 4 ++--
23 files changed, 47 insertions(+), 47 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
index 07fbfca444d5..f34c3897ff48 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
@@ -35,13 +35,13 @@ gpio_poweroff {
gpio_keys {
compatible = "gpio-keys";
- reset {
+ button-reset {
label = "Reset";
linux,code = <KEY_POWER>;
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
- button {
+ button-power {
label = "Power";
linux,code = <KEY_SLEEP>;
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
index f59ff7578dfc..7e3ee64d4bdf 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
@@ -29,25 +29,25 @@ keys {
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
- usb1 {
+ button-usb1 {
label = "USB1 Button";
linux,code = <BTN_0>;
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ button-usb2 {
label = "USB2 Button";
linux,code = <BTN_1>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
index 448b0cd23b5f..2582b84d8415 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
@@ -61,7 +61,7 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ key-power {
label = "Power push button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index 0c0851cd9bec..e8eff0ba1c99 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -179,12 +179,12 @@ gpio-keys {
#address-cells = <1>;
#size-cells = <0>;
- reset {
+ button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index 0738eb679fcd..baea14c68520 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -14,17 +14,17 @@ gpio_keys {
&pmx_button_reset>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
- eject {
+ button-eject {
label = "USB unmount button";
linux,code = <KEY_EJECTCD>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
index 962a910a6f5c..d76dbbce16f1 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
@@ -63,12 +63,12 @@ gpio_keys {
pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
pinctrl-names = "default";
- copy {
+ button-copy {
label = "USB Copy";
linux,code = <KEY_COPY>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
index aed20185fd7a..ea98ff13700e 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
@@ -127,13 +127,13 @@ gpio_keys {
pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
pinctrl-names = "default";
- otb {
+ button-otb {
label = "OTB Button";
linux,code = <KEY_COPY>;
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
index 2338f495d517..fa7ace071de8 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
@@ -154,17 +154,17 @@ gpio-keys {
pinctrl-names = "default";
- Power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
- Reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
- OTB {
+ button-otb {
label = "OTB Button";
linux,code = <KEY_COPY>;
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index c841eb8e7fb1..094854743dde 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -193,7 +193,7 @@ express_card_pwr {
keys {
compatible = "gpio-keys";
- factory_defaults {
+ button-factory-defaults {
label = "factory_defaults";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
index 8c2b540eaf4f..8296486a5931 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
@@ -51,7 +51,7 @@ pmx_usb_power_enable: pmx-usb-power-enable {
gpio_keys {
compatible = "gpio-keys";
- power {
+ button-power {
label = "Power push button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
index 27fd6e2337d5..3f97240fda74 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
@@ -38,13 +38,13 @@ gpio_keys {
pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS Button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index f80af24b9e90..a86dbc490600 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -113,18 +113,18 @@ gpio_keys {
&pmx_power_auto_switch>;
pinctrl-names = "default";
- option {
+ button-option {
label = "Function Button";
linux,code = <KEY_OPTION>;
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
- reserved {
+ button-reserved {
label = "Power-on Switch";
linux,code = <KEY_RESERVED>;
linux,input-type = <5>;
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
- power {
+ button-power {
label = "Power-auto Switch";
linux,code = <KEY_ESC>;
linux,input-type = <5>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
index 5a77286136c7..0d5d85c873b5 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -96,12 +96,12 @@ gpio_keys {
pinctrl-0 = <&pmx_keys>;
pinctrl-names = "default";
- restart {
+ button-restart {
label = "SWR Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "WPS Button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
index b5737026e244..d0f85893aeca 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
@@ -60,19 +60,19 @@ gpio-keys {
* esc and power represent a three position rocker
* switch. Thus the conventional KEY_POWER does not fit
*/
- exc {
+ button-exc {
label = "Back power switch (on|auto)";
linux,code = <KEY_ESC>;
linux,input-type = <5>;
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
- power {
+ button-power {
label = "Back power switch (auto|off)";
linux,code = <KEY_1>;
linux,input-type = <5>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
- option {
+ button-option {
label = "Function button";
linux,code = <KEY_OPTION>;
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index 51530ea86622..6cc068a05673 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -58,7 +58,7 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ button-power {
label = "Power push button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
index 49da633a1bc0..767f34ab434e 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
@@ -40,19 +40,19 @@ keys {
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
};
- copy {
+ button-copy {
label = "Copy Button";
linux,code = <KEY_COPY>;
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
index ea3d36512e9f..bdce8a86ce51 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
@@ -68,17 +68,17 @@ gpio_keys {
pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
- copy {
+ button-copy {
label = "Copy Button";
linux,code = <KEY_COPY>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
index 8ea430168ea5..ef6d6d7a4008 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -118,7 +118,7 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ button-power {
label = "Init Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
index 5aa4669ae254..601760041c99 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
@@ -34,7 +34,7 @@ gpio_keys {
pinctrl-0 = <&pmx_button_eject>;
pinctrl-names = "default";
- eject {
+ button-eject {
debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_EJECTCD>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
index ad093324e075..6703e412c8e2 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
@@ -161,7 +161,7 @@ gpio_keys {
pinctrl-0 = <&pmx_button_power>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
index 30892c19aceb..859521b5b84e 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
@@ -40,12 +40,12 @@ gpio_keys {
pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
pinctrl-names = "default";
- copy {
+ button-copy {
label = "USB Copy";
linux,code = <KEY_COPY>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
index aba1205981f1..3b0a4ed588e8 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
@@ -40,12 +40,12 @@ gpio_keys {
pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
pinctrl-names = "default";
- copy {
+ button-copy {
label = "USB Copy";
linux,code = <KEY_COPY>;
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
index 717236853e45..126db753c8fe 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -41,12 +41,12 @@ gpio_keys {
pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
pinctrl-names = "default";
- copy {
+ button-copy {
label = "USB Copy";
linux,code = <KEY_COPY>;
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/7] ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 1/7] ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings Krzysztof Kozlowski
@ 2024-07-01 14:56 ` Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 3/7] ARM: dts: marvell: kirkwood: align LED node name with bindings Krzysztof Kozlowski
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 14:56 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warnings:
kirkwood-openblocks_a7.dtb: gpio_keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-dir665.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi | 2 --
arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-iconnect.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi | 2 --
arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi | 2 --
arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi | 2 --
arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi | 2 --
arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi | 2 --
arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-t5325.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts | 2 --
arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi | 2 --
21 files changed, 42 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
index 2582b84d8415..92897f8b637b 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
@@ -58,8 +58,6 @@ partition@0 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
key-power {
label = "Power push button";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index e8eff0ba1c99..1d1f4cdedab2 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -176,8 +176,6 @@ blue-24g {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-reset {
label = "reset";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index baea14c68520..20bcd031f3f5 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -8,8 +8,6 @@ / {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_button_power &pmx_button_unmount
&pmx_button_reset>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
index d76dbbce16f1..0f50eb2d5931 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
@@ -58,8 +58,6 @@ sata@80000 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
index ea98ff13700e..a2782fe3d379 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
@@ -122,8 +122,6 @@ otb {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
index fa7ace071de8..91409ae949c4 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
@@ -147,8 +147,6 @@ backup_led {
};
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_button_reset &pmx_button_power
&pmx_button_otb>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
index b54c9980f636..8a11d2b9d449 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
@@ -88,8 +88,6 @@ partition@70000 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_button_function &pmx_power_switch
&pmx_power_auto_switch>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
index 3f97240fda74..ddefaf628501 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
@@ -33,8 +33,6 @@ chosen {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index a86dbc490600..c0f80146706d 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -107,8 +107,6 @@ partition@70000 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_button_function &pmx_power_switch
&pmx_power_auto_switch>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
index 0d5d85c873b5..fd3813ace0c1 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -91,8 +91,6 @@ green-usb {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_keys>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
index d0f85893aeca..d4edf2727388 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
@@ -53,8 +53,6 @@ sata@80000 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
/*
* esc and power represent a three position rocker
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index 6cc068a05673..28f09f71b24d 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -55,8 +55,6 @@ eeprom@50 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-power {
label = "Power push button";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
index 767f34ab434e..47deb93c90a5 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
@@ -35,8 +35,6 @@ gpio_poweroff {
keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
index bdce8a86ce51..e9bd9c551af5 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
@@ -63,8 +63,6 @@ gpio_poweroff {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
index ef6d6d7a4008..20c6290d2037 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -115,8 +115,6 @@ gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_gpio_init>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
button-power {
label = "Init Button";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
index 946f0f453dd1..9c438f10f737 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
@@ -136,8 +136,6 @@ gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_gpio_init>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
button {
label = "Init Button";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
index 601760041c99..b66fc4d57410 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
@@ -29,8 +29,6 @@ chosen {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_button_eject>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
index 6703e412c8e2..a6e77a487d00 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
@@ -156,8 +156,6 @@ usb_power: regulator@1 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_button_power>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
index 859521b5b84e..a2e0ad4b84d8 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
@@ -35,8 +35,6 @@ pmx_board_id: pmx-board-id {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
index 3b0a4ed588e8..35be6bce1dba 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
@@ -35,8 +35,6 @@ pmx_board_id: pmx-board-id {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
index 126db753c8fe..f136059607b7 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -36,8 +36,6 @@ pmx_jumper_jp1: pmx-jumper_jp1 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
pinctrl-names = "default";
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/7] ARM: dts: marvell: kirkwood: align LED node name with bindings
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 1/7] ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 2/7] ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys Krzysztof Kozlowski
@ 2024-07-01 14:56 ` Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 4/7] ARM: dts: marvell: orion: align GPIO keys " Krzysztof Kozlowski
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 14:56 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
kirkwood-ds409slim.dtb: gpio-leds-alarm-12: 'hdd1-green' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../dts/marvell/kirkwood-blackarmor-nas220.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts | 4 +-
arch/arm/boot/dts/marvell/kirkwood-d2net.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-dir665.dts | 16 +++---
arch/arm/boot/dts/marvell/kirkwood-dns320.dts | 10 ++--
arch/arm/boot/dts/marvell/kirkwood-dns325.dts | 10 ++--
arch/arm/boot/dts/marvell/kirkwood-dockstar.dts | 4 +-
arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts | 6 +--
arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts | 20 ++++----
.../dts/marvell/kirkwood-guruplug-server-plus.dts | 8 +--
arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts | 6 +--
arch/arm/boot/dts/marvell/kirkwood-iconnect.dts | 14 +++---
.../boot/dts/marvell/kirkwood-iomega_ix2_200.dts | 8 +--
arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 18 +++----
arch/arm/boot/dts/marvell/kirkwood-laplug.dts | 4 +-
.../boot/dts/marvell/kirkwood-linksys-viper.dts | 4 +-
arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi | 10 ++--
arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts | 12 ++---
.../boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts | 6 +--
arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi | 2 +-
arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-nsa310.dts | 20 ++++----
arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts | 18 +++----
arch/arm/boot/dts/marvell/kirkwood-nsa320.dts | 18 +++----
arch/arm/boot/dts/marvell/kirkwood-nsa325.dts | 18 +++----
arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts | 4 +-
.../dts/marvell/kirkwood-pogoplug-series-4.dts | 4 +-
.../boot/dts/marvell/kirkwood-sheevaplug-esata.dts | 2 +-
arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts | 4 +-
arch/arm/boot/dts/marvell/kirkwood-synology.dtsi | 58 +++++++++++-----------
30 files changed, 157 insertions(+), 157 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
index f34c3897ff48..36b90c632fd6 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
@@ -51,7 +51,7 @@ button-power {
gpio-leds {
compatible = "gpio-leds";
- blue-power {
+ led-blue-power {
label = "nas220:blue:power";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
index 92897f8b637b..151edcd140a0 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
@@ -69,11 +69,11 @@ key-power {
gpio-leds {
compatible = "gpio-leds";
- red-fail {
+ led-red-fail {
label = "cloudbox:red:fail";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
- blue-sata {
+ led-blue-sata {
label = "cloudbox:blue:sata";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
index bd3b266dd766..fcce8730d3e3 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
@@ -37,7 +37,7 @@ NS_V2_LED_ON 1 1
gpio-leds {
compatible = "gpio-leds";
- red-fail {
+ led-red-fail {
label = "d2net_v2:red:fail";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index 1d1f4cdedab2..2f6793f794cd 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -137,38 +137,38 @@ ehci@50000 {
gpio-leds {
compatible = "gpio-leds";
- blue-usb {
+ led-blue-usb {
label = "dir665:blue:usb";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
- blue-internet {
+ led-blue-internet {
/* Can only be turned on if the Internet
* Ethernet port has Link
*/
label = "dir665:blue:internet";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
- amber-internet {
+ led-amber-internet {
label = "dir665:amber:internet";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
- blue-wifi5g {
+ led-blue-wifi5g {
label = "dir665:blue:5g";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
- blue-status {
+ led-blue-status {
label = "dir665:blue:status";
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
- blue-wps {
+ led-blue-wps {
label = "dir665:blue:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
- amber-status {
+ led-amber-status {
label = "dir665:amber:status";
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
- blue-24g {
+ led-blue-24g {
label = "dir665:blue:24g";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
index d6b0f418fd01..d8279e0c4c4f 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
@@ -24,24 +24,24 @@ &pmx_led_red_left_hdd &pmx_led_red_right_hdd
&pmx_led_white_usb>;
pinctrl-names = "default";
- blue-power {
+ led-blue-power {
label = "dns320:blue:power";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
- blue-usb {
+ led-blue-usb {
label = "dns320:blue:usb";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
- orange-l_hdd {
+ led-orange-l_hdd {
label = "dns320:orange:l_hdd";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
- orange-r_hdd {
+ led-orange-r_hdd {
label = "dns320:orange:r_hdd";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
- orange-usb {
+ led-orange-usb {
label = "dns320:orange:usb";
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
index 94d9c06cbbf5..7f396195e977 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
@@ -24,24 +24,24 @@ &pmx_led_red_left_hdd &pmx_led_red_right_hdd
&pmx_led_white_usb>;
pinctrl-names = "default";
- white-power {
+ led-white-power {
label = "dns325:white:power";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
- white-usb {
+ led-white-usb {
label = "dns325:white:usb";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
};
- red-l_hdd {
+ led-red-l_hdd {
label = "dns325:red:l_hdd";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
- red-r_hdd {
+ led-red-r_hdd {
label = "dns325:red:r_hdd";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
- red-usb {
+ led-red-usb {
label = "dns325:red:usb";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
index 264938dfa4d9..090f1e2e5bb6 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
@@ -42,12 +42,12 @@ gpio-leds {
pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
pinctrl-names = "default";
- health {
+ led-health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
- fault {
+ led-fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
index 328516351e84..590bee3c561c 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
@@ -85,15 +85,15 @@ gpio-leds {
&pmx_led_wifi_ap >;
pinctrl-names = "default";
- bluetooth {
+ led-bluetooth {
label = "dreamplug:blue:bluetooth";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
- wifi {
+ led-wifi {
label = "dreamplug:green:wifi";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
- wifi-ap {
+ led-wifi-ap {
label = "dreamplug:green:wifi_ap";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
index d4cb3cd3e2a2..d5ac4e3974da 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
@@ -85,44 +85,44 @@ &pmx_led_right_cap_2 &pmx_led_right_cap_3
>;
pinctrl-names = "default";
- health {
+ led-health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
- fault {
+ led-fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
- left0 {
+ led-left0 {
label = "status:white:left0";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
- left1 {
+ led-left1 {
label = "status:white:left1";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
- left2 {
+ led-left2 {
label = "status:white:left2";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
- left3 {
+ led-left3 {
label = "status:white:left3";
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
- right0 {
+ led-right0 {
label = "status:white:right0";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
- right1 {
+ led-right1 {
label = "status:white:right1";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
- right2 {
+ led-right2 {
label = "status:white:right2";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
- right3 {
+ led-right3 {
label = "status:white:right3";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
index dfb41393941d..d5aa8b505cc0 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
@@ -59,19 +59,19 @@ gpio-leds {
&pmx_led_wmode_r &pmx_led_wmode_g >;
pinctrl-names = "default";
- health-r {
+ led-health-r {
label = "guruplug:red:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
- health-g {
+ led-health-g {
label = "guruplug:green:health";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
- wmode-r {
+ led-wmode-r {
label = "guruplug:red:wmode";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
- wmode-g {
+ led-wmode-g {
label = "guruplug:green:wmode";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
index 0f50eb2d5931..018c6b8f3e8a 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
@@ -79,16 +79,16 @@ gpio-leds {
&pmx_led_usb_transfer>;
pinctrl-names = "default";
- green-os {
+ led-green-os {
label = "ib62x0:green:os";
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
- red-os {
+ led-red-os {
label = "ib62x0:red:os";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
- usb-copy {
+ led-usb-copy {
label = "ib62x0:red:usb_copy";
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
index a2782fe3d379..91b46e77e0b6 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
@@ -89,32 +89,32 @@ led-level {
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- power-blue {
+ led-power-blue {
label = "power:blue";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
- power-red {
+ led-power-red {
label = "power:red";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
- usb1 {
+ led-usb1 {
label = "usb1:blue";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
- usb2 {
+ led-usb2 {
label = "usb2:blue";
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
- usb3 {
+ led-usb3 {
label = "usb3:blue";
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
- usb4 {
+ led-usb4 {
label = "usb4:blue";
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
- otb {
+ led-otb {
label = "otb:blue";
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
index 91409ae949c4..039362152650 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
@@ -127,20 +127,20 @@ gpio-leds {
&pmx_led_rebuild &pmx_led_health >;
pinctrl-names = "default";
- power_led {
+ led-power-led {
label = "status:white:power_led";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
- rebuild_led {
+ led-rebuild-led {
label = "status:white:rebuild_led";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
- health_led {
+ led-health-led {
label = "status:red:health_led";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
- backup_led {
+ led-backup-led {
label = "status:blue:backup_led";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index 094854743dde..974bc9de4702 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -97,52 +97,52 @@ rtc@30 {
leds {
compatible = "gpio-leds";
- status_green {
+ led-status-green {
label = "l-50:green:status";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
- status_red {
+ led-status-red {
label = "l-50:red:status";
gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
};
- wifi {
+ led-wifi {
label = "l-50:green:wifi";
gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
- internet_green {
+ led-internet-green {
label = "l-50:green:internet";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
};
- internet_red {
+ led-internet-red {
label = "l-50:red:internet";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
- usb1_green {
+ led-usb1-green {
label = "l-50:green:usb1";
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port3>;
};
- usb1_red {
+ led-usb1-red {
label = "l-50:red:usb1";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
};
- usb2_green {
+ led-usb2-green {
label = "l-50:green:usb2";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port1>;
};
- usb2_red {
+ led-usb2-red {
label = "l-50:red:usb2";
gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
index 8296486a5931..90ea6cdee8e0 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
@@ -61,11 +61,11 @@ button-power {
gpio-leds {
compatible = "gpio-leds";
- red-fail {
+ led-red-fail {
label = "laplug_v2:red:power";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
- blue-power {
+ led-blue-power {
label = "laplug_v2:blue:power";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
index ddefaf628501..8a1c38ab6111 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
@@ -54,12 +54,12 @@ gpio-leds {
pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
pinctrl-names = "default";
- white-health {
+ led-white-health {
label = "viper:white:health";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
- white-pulse {
+ led-white-pulse {
label = "viper:white:pulse";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index c0f80146706d..5e0b139dd4fb 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -137,28 +137,28 @@ &pmx_led_info &pmx_led_power
&pmx_led_function_blue>;
pinctrl-names = "default";
- func_blue {
+ led-func-blue {
label = "lsxl:blue:func";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
- alarm {
+ led-alarm {
label = "lsxl:red:alarm";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
- info {
+ led-info {
label = "lsxl:amber:info";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
- power {
+ led-power {
label = "lsxl:blue:power";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
- func_red {
+ led-func-red {
label = "lsxl:red:func";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
index e87ea7146546..6533b49a15b2 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
@@ -114,36 +114,36 @@ &pmx_led_user0g &pmx_led_misc
>;
pinctrl-names = "default";
- health {
+ led-health {
label = "status:green:health";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
- user1o {
+ led-user1o {
label = "user1:orange";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- user1g {
+ led-user1g {
label = "user1:green";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- user0o {
+ led-user0o {
label = "user0:orange";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- user0g {
+ led-user0g {
label = "user0:green";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- misc {
+ led-misc {
label = "status:orange:misc";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "on";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
index fd3813ace0c1..e3b41784c876 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -73,17 +73,17 @@ gpio-leds {
pinctrl-0 = <&pmx_leds &pmx_usb_led>;
pinctrl-names = "default";
- green-status {
+ led-green-status {
label = "gtw:green:Status";
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
};
- red-status {
+ led-red-status {
label = "gtw:red:Status";
gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
- green-usb {
+ led-green-usb {
label = "gtw:green:USB";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index 28f09f71b24d..d6b615cf6390 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -66,7 +66,7 @@ button-power {
gpio-leds {
compatible = "gpio-leds";
- red-fail {
+ led-red-fail {
label = "ns2:red:fail";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
index b0cb5907ed63..686bcd6f0f3c 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
@@ -24,7 +24,7 @@ sata@80000 {
gpio-leds {
compatible = "gpio-leds";
- blue-sata {
+ led-blue-sata {
label = "ns2:blue:sata";
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
linux,default-trigger = "disk-activity";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
index c1799a07816e..3555ac1c3b15 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
@@ -87,43 +87,43 @@ &pmx_led_copy_green &pmx_led_copy_red
&pmx_led_hdd_green &pmx_led_hdd_red>;
pinctrl-names = "default";
- green-sys {
+ led-green-sys {
label = "nsa310:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
- red-sys {
+ led-red-sys {
label = "nsa310:red:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
- green-hdd {
+ led-green-hdd {
label = "nsa310:green:hdd";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
- red-hdd {
+ led-red-hdd {
label = "nsa310:red:hdd";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
- green-esata {
+ led-green-esata {
label = "nsa310:green:esata";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
- red-esata {
+ led-red-esata {
label = "nsa310:red:esata";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
- green-usb {
+ led-green-usb {
label = "nsa310:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
- red-usb {
+ led-red-usb {
label = "nsa310:red:usb";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
- green-copy {
+ led-green-copy {
label = "nsa310:green:copy";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
- red-copy {
+ led-red-copy {
label = "nsa310:red:copy";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
index b85e314f045a..ddf84092aade 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
@@ -75,39 +75,39 @@ lm85: lm85@2e {
gpio-leds {
compatible = "gpio-leds";
- green-sys {
+ led-green-sys {
label = "nsa310:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
- red-sys {
+ led-red-sys {
label = "nsa310:red:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
- green-hdd {
+ led-green-hdd {
label = "nsa310:green:hdd";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
- red-hdd {
+ led-red-hdd {
label = "nsa310:red:hdd";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
- green-esata {
+ led-green-esata {
label = "nsa310:green:esata";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
- red-esata {
+ led-red-esata {
label = "nsa310:red:esata";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
- green-usb {
+ led-green-usb {
label = "nsa310:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
- green-copy {
+ led-green-copy {
label = "nsa310:green:copy";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
- red-copy {
+ led-red-copy {
label = "nsa310:red:copy";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
index 652405e65006..dd5c8ffc8781 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
@@ -142,39 +142,39 @@ &pmx_led_copy_green &pmx_led_copy_red
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
pinctrl-names = "default";
- green-sys {
+ led-green-sys {
label = "nsa320:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
- orange-sys {
+ led-orange-sys {
label = "nsa320:orange:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
- green-hdd1 {
+ led-green-hdd1 {
label = "nsa320:green:hdd1";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
- red-hdd1 {
+ led-red-hdd1 {
label = "nsa320:red:hdd1";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
- green-hdd2 {
+ led-green-hdd2 {
label = "nsa320:green:hdd2";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
- red-hdd2 {
+ led-red-hdd2 {
label = "nsa320:red:hdd2";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
- green-usb {
+ led-green-usb {
label = "nsa320:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
- green-copy {
+ led-green-copy {
label = "nsa320:green:copy";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
- red-copy {
+ led-red-copy {
label = "nsa320:red:copy";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
index 371456de34b2..f0786a5f2ce6 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
@@ -162,39 +162,39 @@ &pmx_led_copy_green &pmx_led_copy_red
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
pinctrl-names = "default";
- green-sys {
+ led-green-sys {
label = "nsa325:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
- orange-sys {
+ led-orange-sys {
label = "nsa325:orange:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
- green-hdd1 {
+ led-green-hdd1 {
label = "nsa325:green:hdd1";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
- red-hdd1 {
+ led-red-hdd1 {
label = "nsa325:red:hdd1";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
- green-hdd2 {
+ led-green-hdd2 {
label = "nsa325:green:hdd2";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
- red-hdd2 {
+ led-red-hdd2 {
label = "nsa325:red:hdd2";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
- green-usb {
+ led-green-usb {
label = "nsa325:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
- green-copy {
+ led-green-copy {
label = "nsa325:green:copy";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
- red-copy {
+ led-red-copy {
label = "nsa325:red:copy";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
index f9e95e55f36d..39a5345332da 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
@@ -33,12 +33,12 @@ chosen {
gpio-leds {
compatible = "gpio-leds";
- health {
+ led-health {
label = "pogo_e02:green:health";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
- fault {
+ led-fault {
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
index b66fc4d57410..0e9c4cf79822 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
@@ -46,12 +46,12 @@ gpio-leds {
pinctrl-0 = <&pmx_led_green &pmx_led_red>;
pinctrl-names = "default";
- health {
+ led-health {
label = "pogoplugv4:green:health";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- fault {
+ led-fault {
label = "pogoplugv4:red:fault";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
index ae8f493c9a0f..eb185273376e 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
@@ -33,7 +33,7 @@ gpio-leds {
pinctrl-0 = <&pmx_led_blue>;
pinctrl-names = "default";
- health {
+ led-health {
label = "sheevaplug:blue:health";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
index c73cc904e5c4..ce73fcf2255f 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
@@ -28,13 +28,13 @@ gpio-leds {
pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
pinctrl-names = "default";
- health {
+ led-health {
label = "sheevaplug:blue:health";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
- misc {
+ led-misc {
label = "sheevaplug:red:misc";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 20964eb48fd7..6b7c5218b1fb 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -410,7 +410,7 @@ gpio-leds-alarm-12 {
pinctrl-0 = <&pmx_alarmled_12>;
pinctrl-names = "default";
- hdd1-green {
+ led-hdd1-green {
label = "synology:alarm";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
@@ -424,42 +424,42 @@ &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
&pmx_hddled_26 &pmx_hddled_27>;
pinctrl-names = "default";
- hdd1-green {
+ led-hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
- hdd1-amber {
+ led-hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
- hdd2-green {
+ led-hdd2-green {
label = "synology:green:hdd2";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
- hdd2-amber {
+ led-hdd2-amber {
label = "synology:amber:hdd2";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
- hdd3-green {
+ led-hdd3-green {
label = "synology:green:hdd3";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
- hdd3-amber {
+ led-hdd3-amber {
label = "synology:amber:hdd3";
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
- hdd4-green {
+ led-hdd4-green {
label = "synology:green:hdd4";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
- hdd4-amber {
+ led-hdd4-amber {
label = "synology:amber:hdd4";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
@@ -471,12 +471,12 @@ gpio-leds-hdd-21-1 {
pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
pinctrl-names = "default";
- hdd1-green {
+ led-hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
- hdd1-amber {
+ led-hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
@@ -488,22 +488,22 @@ gpio-leds-hdd-21-2 {
pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
pinctrl-names = "default";
- hdd1-green {
+ led-hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
- hdd1-amber {
+ led-hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
- hdd2-green {
+ led-hdd2-green {
label = "synology:green:hdd2";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
- hdd2-amber {
+ led-hdd2-amber {
label = "synology:amber:hdd2";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
@@ -518,52 +518,52 @@ &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
&pmx_hddled_45>;
pinctrl-names = "default";
- hdd1-green {
+ led-hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
- hdd1-amber {
+ led-hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
- hdd2-green {
+ led-hdd2-green {
label = "synology:green:hdd2";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
- hdd2-amber {
+ led-hdd2-amber {
label = "synology:amber:hdd2";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
- hdd3-green {
+ led-hdd3-green {
label = "synology:green:hdd3";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
- hdd3-amber {
+ led-hdd3-amber {
label = "synology:amber:hdd3";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
- hdd4-green {
+ led-hdd4-green {
label = "synology:green:hdd4";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
- hdd4-amber {
+ led-hdd4-amber {
label = "synology:amber:hdd4";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
- hdd5-green {
+ led-hdd5-green {
label = "synology:green:hdd5";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
- hdd5-amber {
+ led-hdd5-amber {
label = "synology:amber:hdd5";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
@@ -575,22 +575,22 @@ gpio-leds-hdd-38 {
pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
pinctrl-names = "default";
- hdd1-green {
+ led-hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
- hdd1-amber {
+ led-hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
- hdd2-green {
+ led-hdd2-green {
label = "synology:green:hdd2";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
- hdd2-amber {
+ led-hdd2-amber {
label = "synology:amber:hdd2";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 4/7] ARM: dts: marvell: orion: align GPIO keys node name with bindings
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
` (2 preceding siblings ...)
2024-07-01 14:56 ` [PATCH 3/7] ARM: dts: marvell: kirkwood: align LED node name with bindings Krzysztof Kozlowski
@ 2024-07-01 14:56 ` Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 5/7] ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys Krzysztof Kozlowski
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 14:56 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
Bindings expect the GPIO key node names to follow certain pattern, see
dtbs_check warnings:
orion5x-lacie-d2-network.dtb: gpio-keys: 'front_button', 'power_rocker_sw_off', 'power_rocker_sw_on' do not match any of the regexes: '^(button|event|key|switch| ...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts | 7 ++++---
arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts | 2 +-
arch/arm/boot/dts/marvell/orion5x-lswsgl.dts | 7 ++++---
arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts | 5 +++--
arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts | 2 +-
5 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
index 03471d30bfd9..3d6c5af0e843 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
@@ -37,20 +37,21 @@ gpio-keys {
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
- front_button {
+
+ button-front {
label = "Front Push Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
};
- power_rocker_sw_on {
+ switch-power-rocker-sw-on {
label = "Power rocker switch (on|auto)";
linux,input-type = <5>; /* EV_SW */
linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
- power_rocker_sw_off {
+ switch-power-rocker-sw-off {
label = "Power rocker switch (auto|off)";
linux,input-type = <5>; /* EV_SW */
linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
index ee751995c8d0..624b737a8be4 100644
--- a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
@@ -61,7 +61,7 @@ memory { /* 128 MB */
};
gpio_keys {
- func {
+ func-button {
label = "Function Button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
index 2fbc17d6dfa4..e2829fb0c8b2 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
@@ -76,20 +76,21 @@ gpio-keys {
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
- func {
+
+ key-func {
label = "Function Button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
- power {
+ key-power {
label = "Power-on Switch";
linux,input-type = <5>; /* EV_SW */
linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
- autopower {
+ key-autopower {
label = "Power-auto Switch";
linux,input-type = <5>; /* EV_SW */
linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
diff --git a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
index d57859998350..90ce5fa883a4 100644
--- a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
@@ -37,13 +37,14 @@ gpio-keys {
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
- power {
+
+ key-power {
label = "Power";
linux,code = <KEY_POWER>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
- reset {
+ key-reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
index fb203e7d37f5..d63ea15539aa 100644
--- a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
@@ -35,7 +35,7 @@ gpio-keys {
pinctrl-0 = <&pmx_reset_button>;
pinctrl-names = "default";
- reset {
+ key-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 5/7] ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
` (3 preceding siblings ...)
2024-07-01 14:56 ` [PATCH 4/7] ARM: dts: marvell: orion: align GPIO keys " Krzysztof Kozlowski
@ 2024-07-01 14:56 ` Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 6/7] ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs Krzysztof Kozlowski
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 14:56 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warnings:
orion5x-lacie-ethernet-disk-mini-v2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi | 2 --
arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts | 2 --
arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts | 5 ++---
arch/arm/boot/dts/marvell/orion5x-lswsgl.dts | 2 --
arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts | 2 --
5 files changed, 2 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
index c2d87ba6190a..055ac754c5fd 100644
--- a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
@@ -48,8 +48,6 @@
/ {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_power_switch>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
index 3d6c5af0e843..12a4aac2633e 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
@@ -35,8 +35,6 @@ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
button-front {
label = "Front Push Button";
diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
index f17e25ac98dd..a7586370b1d5 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -39,9 +39,8 @@ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_power_button>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- button@1 {
+
+ button-1 {
label = "Power-on Switch";
linux,code = <KEY_POWER>;
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
index e2829fb0c8b2..35dffb24b8b5 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
@@ -74,8 +74,6 @@ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
key-func {
label = "Function Button";
diff --git a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
index 90ce5fa883a4..cb1bd24b7ae3 100644
--- a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
@@ -35,8 +35,6 @@ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
key-power {
label = "Power";
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 6/7] ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
` (4 preceding siblings ...)
2024-07-01 14:56 ` [PATCH 5/7] ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys Krzysztof Kozlowski
@ 2024-07-01 14:56 ` Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 7/7] ARM: dts: marvell: orion: align LED node name with bindings Krzysztof Kozlowski
2024-07-05 12:43 ` [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Gregory CLEMENT
7 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 14:56 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
The 'gpio' property in GPIO LEDs is deprecated, as reported by
dtbs_check:
orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/marvell/orion5x-lswsgl.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
index 35dffb24b8b5..802cd6ff6169 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
@@ -104,22 +104,22 @@ gpio-leds {
alarm {
label = "lswsgl:alarm:red";
- gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
info {
label = "lswsgl:info:amber";
- gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
func {
label = "lswsgl:func:blue:top";
- gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
power {
label = "lswsgl:power:blue:bottom";
- gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 7/7] ARM: dts: marvell: orion: align LED node name with bindings
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
` (5 preceding siblings ...)
2024-07-01 14:56 ` [PATCH 6/7] ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs Krzysztof Kozlowski
@ 2024-07-01 14:56 ` Krzysztof Kozlowski
2024-07-05 12:43 ` [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Gregory CLEMENT
7 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 14:56 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts | 2 +-
arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts | 2 +-
arch/arm/boot/dts/marvell/orion5x-lswsgl.dts | 8 ++++----
arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
index a7586370b1d5..f81acb9b7223 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -52,7 +52,7 @@ gpio-leds {
pinctrl-0 = <&pmx_power_led>;
pinctrl-names = "default";
- led@1 {
+ led-1 {
label = "power:blue";
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
index 624b737a8be4..79fee048c900 100644
--- a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
@@ -90,7 +90,7 @@ amber-info-led {
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
- func {
+ func-led {
label = "lschl:func:blue:top";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
index 802cd6ff6169..e0da406c430f 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
@@ -102,22 +102,22 @@ gpio-leds {
&pmx_led_power>;
pinctrl-names = "default";
- alarm {
+ led-alarm {
label = "lswsgl:alarm:red";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
- info {
+ led-info {
label = "lswsgl:info:amber";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
- func {
+ led-func {
label = "lswsgl:func:blue:top";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
- power {
+ led-power {
label = "lswsgl:power:blue:bottom";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
default-state = "on";
diff --git a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
index fd78aa02a3c5..75ab913b21e5 100644
--- a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
@@ -32,7 +32,7 @@ gpio-leds {
pinctrl-0 = <&pmx_debug_led>;
pinctrl-names = "default";
- led@0 {
+ led-0 {
label = "rd88f5182:cpu";
linux,default-trigger = "heartbeat";
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
` (6 preceding siblings ...)
2024-07-01 14:56 ` [PATCH 7/7] ARM: dts: marvell: orion: align LED node name with bindings Krzysztof Kozlowski
@ 2024-07-05 12:43 ` Gregory CLEMENT
7 siblings, 0 replies; 9+ messages in thread
From: Gregory CLEMENT @ 2024-07-05 12:43 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andrew Lunn, Sebastian Hesselbarth,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, devicetree, linux-kernel, Krzysztof Kozlowski
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:
> Few cleanups reported by dtbs_check.
>
> Best regards,
> Krzysztof
>
> ---
Series applied on mvebu/dt
Thanks,
Gregory
> Krzysztof Kozlowski (7):
> ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings
> ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys
> ARM: dts: marvell: kirkwood: align LED node name with bindings
> ARM: dts: marvell: orion: align GPIO keys node name with bindings
> ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys
> ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs
> ARM: dts: marvell: orion: align LED node name with bindings
>
> .../dts/marvell/kirkwood-blackarmor-nas220.dts | 6 +--
> arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts | 8 +--
> arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts | 8 ++-
> arch/arm/boot/dts/marvell/kirkwood-d2net.dts | 2 +-
> arch/arm/boot/dts/marvell/kirkwood-dir665.dts | 22 ++++----
> arch/arm/boot/dts/marvell/kirkwood-dns320.dts | 10 ++--
> arch/arm/boot/dts/marvell/kirkwood-dns325.dts | 10 ++--
> arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi | 8 ++-
> arch/arm/boot/dts/marvell/kirkwood-dockstar.dts | 4 +-
> arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts | 6 +--
> arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts | 20 ++++----
> .../dts/marvell/kirkwood-guruplug-server-plus.dts | 8 +--
> arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts | 12 ++---
> arch/arm/boot/dts/marvell/kirkwood-iconnect.dts | 20 ++++----
> .../boot/dts/marvell/kirkwood-iomega_ix2_200.dts | 16 +++---
> arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 20 ++++----
> arch/arm/boot/dts/marvell/kirkwood-laplug.dts | 6 +--
> .../arm/boot/dts/marvell/kirkwood-linkstation.dtsi | 2 -
> .../boot/dts/marvell/kirkwood-linksys-viper.dts | 10 ++--
> arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi | 18 +++----
> arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts | 12 ++---
> .../boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts | 12 ++---
> arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi | 8 ++-
> arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi | 6 +--
> arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts | 2 +-
> arch/arm/boot/dts/marvell/kirkwood-nsa310.dts | 20 ++++----
> arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts | 18 +++----
> arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts | 8 ++-
> arch/arm/boot/dts/marvell/kirkwood-nsa320.dts | 18 +++----
> arch/arm/boot/dts/marvell/kirkwood-nsa325.dts | 18 +++----
> .../boot/dts/marvell/kirkwood-nsa3x0-common.dtsi | 8 ++-
> .../boot/dts/marvell/kirkwood-openblocks_a6.dts | 4 +-
> .../boot/dts/marvell/kirkwood-openblocks_a7.dts | 2 -
> arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts | 4 +-
> .../dts/marvell/kirkwood-pogoplug-series-4.dts | 8 ++-
> .../boot/dts/marvell/kirkwood-sheevaplug-esata.dts | 2 +-
> arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts | 4 +-
> arch/arm/boot/dts/marvell/kirkwood-synology.dtsi | 58 +++++++++++-----------
> arch/arm/boot/dts/marvell/kirkwood-t5325.dts | 4 +-
> arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts | 6 +--
> arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts | 6 +--
> arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi | 6 +--
> .../dts/marvell/mvebu-linkstation-gpio-simple.dtsi | 2 -
> .../boot/dts/marvell/orion5x-lacie-d2-network.dts | 9 ++--
> .../orion5x-lacie-ethernet-disk-mini-v2.dts | 7 ++-
> .../boot/dts/marvell/orion5x-linkstation-lschl.dts | 4 +-
> arch/arm/boot/dts/marvell/orion5x-lswsgl.dts | 25 +++++-----
> .../marvell/orion5x-maxtor-shared-storage-2.dts | 7 ++-
> .../boot/dts/marvell/orion5x-netgear-wnr854t.dts | 2 +-
> .../arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts | 2 +-
> 50 files changed, 230 insertions(+), 278 deletions(-)
> ---
> base-commit: 9c9a5aa3a60dc9e1e2448c29f346385914052642
> change-id: 20240701-dts-marvell-cleanup-1c9fcf6ae439
>
> Best regards,
> --
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2024-07-05 12:43 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-07-01 14:56 [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 1/7] ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 2/7] ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 3/7] ARM: dts: marvell: kirkwood: align LED node name with bindings Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 4/7] ARM: dts: marvell: orion: align GPIO keys " Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 5/7] ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 6/7] ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs Krzysztof Kozlowski
2024-07-01 14:56 ` [PATCH 7/7] ARM: dts: marvell: orion: align LED node name with bindings Krzysztof Kozlowski
2024-07-05 12:43 ` [PATCH 0/7] ARM: dts: marvell: orion / kirkwood: few cleanups Gregory CLEMENT
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).