From: Lars Povlsen <lars.povlsen@microchip.com>
To: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Lars Povlsen <lars.povlsen@microchip.com>,
Serge Semin <fancer.lancer@gmail.com>,
Mark Brown <broonie@kernel.org>, SoC Team <soc@kernel.org>,
Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
<linux-kernel@vger.kernel.org>, <linux-spi@vger.kernel.org>,
Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 04/10] dt-bindings: spi: Add bindings for spi-dw-mchp
Date: Tue, 9 Jun 2020 12:27:44 +0200 [thread overview]
Message-ID: <87img0ilen.fsf@soft-dev15.microsemi.net> (raw)
In-Reply-To: <20200602194925.qbevttzz3ghvmd2d@mobilestation>
Serge Semin writes:
> On Wed, May 13, 2020 at 04:00:25PM +0200, Lars Povlsen wrote:
>> This add DT bindings for the Microsemi/Microchip SPI controller used
>> in various SoC's. It describes the "mscc,ocelot-spi" and
>> "mscc,jaguar2-spi" bindings.
>
> As I see it, there is no need in this patch at all. Current DT binding file
> describes the MSCC version of the DW APB SSI IP pretty well. You can add an
> example to the DT schema though with "mscc,ocelot-spi" or "mscc,jaguar2-spi"
> compatible string and additional registers range.
>
Fine by me. I just had the understanding that a YAML binding had to be
given for a new driver.
I will add the bindings to the existing YAML with proper guards.
---Lars
> -Sergey
>
>>
>> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
>> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
>> ---
>> .../bindings/spi/mscc,ocelot-spi.yaml | 60 +++++++++++++++++++
>> .../bindings/spi/snps,dw-apb-ssi.txt | 7 +--
>> MAINTAINERS | 1 +
>> 3 files changed, 63 insertions(+), 5 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml b/Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
>> new file mode 100644
>> index 0000000000000..a3ac0fa576553
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
>> @@ -0,0 +1,60 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/spi/mscc,ocelot-spi.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Microsemi Vcore-III SPI Communication Controller
>> +
>> +maintainers:
>> + - Alexandre Belloni <alexandre.belloni@bootlin.com>
>> + - Lars Povlsen <lars.povlsen@microchip.com>
>> +
>> +allOf:
>> + - $ref: "spi-controller.yaml#"
>> +
>> +description: |
>> + The Microsemi Vcore-III SPI controller is a general purpose SPI
>> + controller based upon the Designware SPI controller. It uses an 8
>> + byte rx/tx fifo.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - mscc,ocelot-spi
>> + - mscc,jaguar2-spi
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + reg:
>> + minItems: 2
>> + items:
>> + - description: Designware SPI registers
>> + - description: CS override registers
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + reg-io-width:
>> + description: |
>> + The I/O register width (in bytes) implemented by this device.
>> + items:
>> + enum: [ 2, 4 ]
>> + maxItems: 1
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> +
>> +examples:
>> + - |
>> + spi0: spi@101000 {
>> + compatible = "mscc,ocelot-spi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0x101000 0x100>, <0x3c 0x18>;
>> + interrupts = <9>;
>> + clocks = <&ahb_clk>;
>> + };
>> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
>> index 3ed08ee9feba4..5e1849be7bae5 100644
>> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
>> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
>> @@ -1,10 +1,8 @@
>> Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
>>
>> Required properties:
>> -- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
>> - "jaguar2", or "amazon,alpine-dw-apb-ssi"
>> -- reg : The register base for the controller. For "mscc,<soc>-spi", a second
>> - register set is required (named ICPU_CFG:SPI_MST)
>> +- compatible : "snps,dw-apb-ssi" or "amazon,alpine-dw-apb-ssi"
>> +- reg : The register base for the controller.
>> - interrupts : One interrupt, used by the controller.
>> - #address-cells : <1>, as required by generic SPI binding.
>> - #size-cells : <0>, also as required by generic SPI binding.
>> @@ -38,4 +36,3 @@ Example:
>> cs-gpios = <&gpio0 13 0>,
>> <&gpio0 14 0>;
>> };
>> -
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 1db598723a1d8..6472240b8391b 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -11231,6 +11231,7 @@ L: linux-mips@vger.kernel.org
>> S: Supported
>> F: Documentation/devicetree/bindings/mips/mscc.txt
>> F: Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
>> +F: Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
>> F: arch/mips/boot/dts/mscc/
>> F: arch/mips/configs/generic/board-ocelot.config
>> F: arch/mips/generic/board-ocelot.c
>> --
>> 2.26.2
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Lars Povlsen,
Microchip
next prev parent reply other threads:[~2020-06-09 10:27 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-13 14:00 [PATCH 00/10] spi: Adding support for Microchip Sparx5 SoC Lars Povlsen
2020-05-13 14:00 ` [PATCH 01/10] spi: dw: Add support for polled operation via no IRQ specified in DT Lars Povlsen
2020-05-13 14:55 ` Andy Shevchenko
2020-05-19 10:25 ` Lars Povlsen
[not found] ` <20200513142050.GH4803@sirena.org.uk>
2020-05-14 13:04 ` Serge Semin
2020-05-15 9:11 ` Lars Povlsen
[not found] ` <20200513143753.GI4803@sirena.org.uk>
2020-05-19 10:21 ` Lars Povlsen
2020-06-02 19:10 ` Serge Semin
2020-06-09 9:13 ` Lars Povlsen
2020-05-13 14:00 ` [PATCH 02/10] spi: dw: Add support for RX sample delay register Lars Povlsen
2020-06-02 19:39 ` Serge Semin
2020-06-09 10:04 ` Lars Povlsen
2020-05-13 14:00 ` [PATCH 03/10] spi: dw: Add support for client driver memory operations Lars Povlsen
2020-05-13 14:00 ` [PATCH 04/10] dt-bindings: spi: Add bindings for spi-dw-mchp Lars Povlsen
[not found] ` <20200513145213.GJ4803@sirena.org.uk>
2020-05-19 11:47 ` Lars Povlsen
[not found] ` <20200519115829.GI4611@sirena.org.uk>
2020-05-19 12:10 ` Lars Povlsen
2020-06-02 19:49 ` Serge Semin
2020-06-09 10:27 ` Lars Povlsen [this message]
2020-05-13 14:00 ` [PATCH 05/10] spi: spi-dw-mmio: Spin off MSCC platforms into spi-dw-mchp Lars Povlsen
[not found] ` <20200513151811.GL4803@sirena.org.uk>
2020-05-19 12:05 ` Lars Povlsen
2020-06-02 21:12 ` Serge Semin
2020-06-10 14:28 ` Lars Povlsen
2020-05-13 14:00 ` [PATCH 06/10] dt-bindings: spi: spi-dw-mchp: Add Sparx5 support Lars Povlsen
2020-06-02 23:07 ` Serge Semin
2020-06-10 12:27 ` Lars Povlsen
2020-05-13 14:00 ` [PATCH 07/10] " Lars Povlsen
[not found] ` <20200514102516.GD5127@sirena.org.uk>
2020-05-19 9:29 ` Lars Povlsen
2020-06-02 23:22 ` Serge Semin
2020-05-13 14:00 ` [PATCH 08/10] arm64: dts: sparx5: Add SPI controller Lars Povlsen
2020-05-13 14:00 ` [PATCH 09/10] arm64: dts: sparx5: Add spi-nor support Lars Povlsen
2020-05-13 14:00 ` [PATCH 10/10] arm64: dts: sparx5: Add spi-nand devices Lars Povlsen
2020-05-29 16:21 ` [PATCH 00/10] spi: Adding support for Microchip Sparx5 SoC Serge Semin
2020-06-02 8:18 ` Lars Povlsen
2020-06-02 8:21 ` Serge Semin
2020-06-02 23:44 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87img0ilen.fsf@soft-dev15.microsemi.net \
--to=lars.povlsen@microchip.com \
--cc=Sergey.Semin@baikalelectronics.ru \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).