From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory CLEMENT Subject: Re: [PATCH 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips Date: Fri, 22 Mar 2019 10:41:42 +0100 Message-ID: <87lg17p7op.fsf@FE-laptop> References: <20190315151152.30467-1-gregory.clement@bootlin.com> <20190315151152.30467-2-gregory.clement@bootlin.com> <20190316170730.2ed341cc@archlinux> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190316170730.2ed341cc@archlinux> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Jonathan Cameron Cc: devicetree@vger.kernel.org, Alexandre Belloni , Lars-Peter Clausen , Peter Meerwald-Stadler , linux-iio@vger.kernel.org, Rob Herring , Thomas Petazzoni , Hartmut Knaack , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Hi Jonathan, On sam., mars 16 2019, Jonathan Cameron wrote: > On Fri, 15 Mar 2019 16:11:50 +0100 > Gregory CLEMENT wrote: > >> This adds device tree bindings for the TI ADS8344 A/DC chips. >> >> Signed-off-by: Gregory CLEMENT > Looks good to me, though io-channel-cells only needs to be 1 if > you have consumers... Otherwise, it shouldn't be there at all.. OK I will remove it then. Thanks, Gregory > > Jonathan > >> --- >> .../bindings/iio/adc/ti-ads8344.txt | 21 +++++++++++++++++++ >> 1 file changed, 21 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt >> >> diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt >> new file mode 100644 >> index 000000000000..6576c4fed7b7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt >> @@ -0,0 +1,21 @@ >> +* Texas Instruments ADS8344 A/DC chip >> + >> +Required properties: >> + - compatible: Must be "ti,ads8344" >> + - #io-channel-cells: Must be 1 as per ../iio-bindings.txt >> + - reg: SPI chip select number for the device >> + - vref-supply: phandle to a regulator node that supplies the >> + reference voltage >> + >> +Recommended properties: >> + - spi-max-frequency: Definition as per >> + Documentation/devicetree/bindings/spi/spi-bus.txt >> + >> +Example: >> +adc@0 { >> + compatible = "ti,ads8344"; >> + reg = <0>; >> + #io-channel-cells = <1>; >> + vref-supply = <&refin_supply>; >> + spi-max-frequency = <10000000>; >> +}; > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com