[PATCH 1/3] dts: usb3: Add configure-gfladj property to USB3 nod

[PATCH 1/3] dts: usb3: Add configure-gfladj property to USB3 nod

[yinbo.zhu-3arQi8VN3Tc]

From: "yinbo.zhu" <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>

Signed-off-by: yinbo.zhu <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
---
 arch/arm/boot/dts/ls1021a.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index ffbf3cf..f525297 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -731,6 +731,8 @@
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			configure-gfladj;
+			dma-coherent;
 			snps,dis_rxdet_inp3_quirk;
 		};
 
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] dts: usb3: Add configure-gfladj property to USB3 nod

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 724 bytes --]


Hi,

yinbo.zhu-3arQi8VN3Tc@public.gmane.org writes:
> From: "yinbo.zhu" <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
>
> Signed-off-by: yinbo.zhu <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index ffbf3cf..f525297 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -731,6 +731,8 @@
>  			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
>  			dr_mode = "host";
>  			snps,quirk-frame-length-adjustment = <0x20>;
> +			configure-gfladj;

this binding isn't documented, nor is it used anywhere.

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

RE: [linux-devel] [PATCH 1/3] dts: usb3: Add configure-gfladj property to USB3 nod

[Sriram Dash]

>From: linux-devel-bounces-XDVM779Km55Y1YpKYGMr2+TW4wlIGRCZ@public.gmane.org [mailto:linux-devel-
>bounces-XDVM779Km55Y1YpKYGMr2+TW4wlIGRCZ@public.gmane.org] On Behalf Of yinbo.zhu-3arQi8VN3Tc@public.gmane.org
>Subject: [linux-devel] [PATCH 1/3] dts: usb3: Add configure-gfladj property to USB3
>nod
>
>From: "yinbo.zhu" <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
>
>Signed-off-by: yinbo.zhu <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
>---
> arch/arm/boot/dts/ls1021a.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index
>ffbf3cf..f525297 100644
>--- a/arch/arm/boot/dts/ls1021a.dtsi
>+++ b/arch/arm/boot/dts/ls1021a.dtsi
>@@ -731,6 +731,8 @@
> 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> 			dr_mode = "host";
> 			snps,quirk-frame-length-adjustment = <0x20>;
>+			configure-gfladj;

I reckon the "configure-gfladj" is replaced with "snps,quirk-frame-length-adjustment"
in open source, which sets fladj reg value.
Please verify.

>+			dma-coherent;

> 			snps,dis_rxdet_inp3_quirk;
> 		};
>
>--
>2.1.0.27.g96db324
>
>_______________________________________________
>linux-devel mailing list
>linux-devel-XDVM779Km55Y1YpKYGMr2+TW4wlIGRCZ@public.gmane.org
>http://gforge.freescale.net/mailman/listinfo/linux-devel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [linux-devel] [PATCH 1/3] dts: usb3: Add configure-gfladj property to USB3 nod

[Leo Li]

> -----Original Message-----
> From: linux-devel-bounces@gforge.freescale.net [mailto:linux-devel-
> bounces@gforge.freescale.net] On Behalf Of yinbo.zhu@nxp.com
> Sent: Friday, August 11, 2017 4:30 AM
> To: linux-devel@gforge.freescale.net; Yinbo Zhu <yinbo.zhu@nxp.com>; Rob
> Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> Russell King <linux@armlinux.org.uk>; Felipe Balbi <balbi@kernel.org>
> Cc: open list <devicetree@vger.kernel.org>; Laurent Pinchart
> <laurent.pinchart+renesas@ideasonboard.com>; Catalin Marinas
> <catalin.marinas@arm.com>; open list <linux-usb@vger.kernel.org>; open list
> <linux-kernel@vger.kernel.org>; Doug Ledford <dledford@redhat.com>;
> Stefano Stabellini <sstabellini@kernel.org>; Greg Kroah-Hartman
> <gregkh@linuxfoundation.org>; Bart Van Assche
> <bart.vanassche@sandisk.com>; moderated list <linux-arm-
> kernel@lists.infradead.org>
> Subject: [linux-devel] [PATCH 1/3] dts: usb3: Add configure-gfladj property to
> USB3 nod
> 
> From: "yinbo.zhu" <yinbo.zhu@nxp.com>
> 

There is no device tree binding for this property.  You need to add the binding first before you add it to the dts.  And normally you need to describe why the change is needed in the commit message.

> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index ffbf3cf..f525297 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -731,6 +731,8 @@
>  			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
>  			dr_mode = "host";
>  			snps,quirk-frame-length-adjustment = <0x20>;
> +			configure-gfladj;
> +			dma-coherent;

This change is not aligned with your patch title.

>  			snps,dis_rxdet_inp3_quirk;
>  		};
> 
> --
> 2.1.0.27.g96db324
> 
> _______________________________________________
> linux-devel mailing list
> linux-devel@gforge.freescale.net
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgforge.
> freescale.net%2Fmailman%2Flistinfo%2Flinux-
> devel&data=01%7C01%7Cleoyang.li%40nxp.com%7C015b054c76ad48399ea408
> d4e09de91d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=7ioU%2Bb
> QUP4X%2F8%2BFpcQZICVDHugioStScbrHc0XOqaQs%3D&reserved=0