From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kalle Valo Subject: Re: ath10k: calibration data through Device Tree? Date: Tue, 7 Oct 2014 19:44:43 +0300 Message-ID: <87vbnvhls4.fsf@kamboji.qca.qualcomm.com> References: <87tx3mmx4s.fsf@kamboji.qca.qualcomm.com> <20141002132914.GN5788@leverpostej> <87ppeamvr9.fsf@kamboji.qca.qualcomm.com> <542DA1F7.9090904@amacapital.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Return-path: In-Reply-To: (Andy Lutomirski's message of "Thu, 2 Oct 2014 12:35:09 -0700") Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Andy Lutomirski Cc: Adrian Chadd , Mark Rutland , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, "ath10k-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" List-Id: devicetree@vger.kernel.org Andy Lutomirski writes: > Perhaps unsurprisingly, the OpenWRT patch that enables it to work for > real (by shoving a file into /lib/firmware that's contains a copy of > data read from flash) hasn't made it upstream. I assume that the > purpose of this discussion is to settle on a real solution. I'm hoping to have ath10k support three different methods to get calibration data: 1) OTP (already supported) 2) Device Tree (under discussion) 3) from a file I'm hoping to send patches for 2) and 3) soon. -- Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html