Re: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Hi,

> With board revision 1.3, SolidRun moved the power LED to the middle of
> the board. In old place of power LED a GPIO controllable heartbeat LED
> was added. This commit only touches Single Shot variant, since only this
> variant is all revision 1.3.
>
> Reported-by: Alexandra Alth <alexandra@alth.de>
> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

Applied on mvebu/dt64

Thanks,

Gregory

> ---
>  .../marvell/armada-8040-mcbin-singleshot.dts  | 22 +++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
> index 2e6832d02a59..411d20064271 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
> @@ -5,6 +5,8 @@
>   * Device Tree file for MACCHIATOBin Armada 8040 community board platform
>   */
>  
> +#include <dt-bindings/leds/common.h>
> +
>  #include "armada-8040-mcbin.dtsi"
>  
>  / {
> @@ -12,6 +14,19 @@ / {
>  	compatible = "marvell,armada8040-mcbin-singleshot",
>  			"marvell,armada8040-mcbin", "marvell,armada8040",
>  			"marvell,armada-ap806-quad", "marvell,armada-ap806";
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-0 = <&cp0_led18_pins>;
> +		pinctrl-names = "default";
> +
> +		led18 {
> +			gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
> +			function = LED_FUNCTION_HEARTBEAT;
> +			color = <LED_COLOR_ID_GREEN>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
>  };
>  
>  &cp0_eth0 {
> @@ -27,3 +42,10 @@ &cp1_eth0 {
>  	managed = "in-band-status";
>  	sfp = <&sfp_eth1>;
>  };
> +
> +&cp0_pinctrl {
> +	cp0_led18_pins: led18-pins {
> +		marvell,pins = "mpp33";
> +		marvell,function = "gpio";
> +	};
> +};
> -- 
> 2.29.2
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com