From: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Miquel Raynal
<miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Zhang Rui <rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Eduardo Valentin
<edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
Sebastian Hesselbarth
<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Thomas Petazzoni
<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Antoine Tenart
<antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Nadav Haklai <nadavh-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>,
David Sniatkiwicz
<davidsn-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH v4 06/12] thermal: armada: Add support for Armada AP806
Date: Mon, 18 Dec 2017 17:05:07 +0100 [thread overview]
Message-ID: <87y3m0hvik.fsf@free-electrons.com> (raw)
In-Reply-To: <20171218143643.7714-7-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> (Miquel Raynal's message of "Mon, 18 Dec 2017 15:36:37 +0100")
Hi Miquel,
On lun., déc. 18 2017, Miquel Raynal <miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
> From: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
>
> The AP806 component is integrated in the Armada 8K and 7K lines of
> processors.
>
> The thermal sensor sample field on the status register is a signed
> value. Extend armada_get_temp() and the driver structure to handle
> signed values.
>
> Signed-off-by: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
> [<miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>: Changes when applying over the
> previous patches, including the register names changes, also switched
> the coefficients values to s64 instead of unsigned long to deal with
> negative values and used do_div instead of the traditionnal '/']
> Signed-off-by: Miquel Raynal <miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
I am just a little concerned by the fac that the value pass though
get_temp() is an int and now the intermediate calculation are in
s64. But maybe I'm too picky for this,
Reviewed-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Gregory
> ---
> drivers/thermal/armada_thermal.c | 80 ++++++++++++++++++++++++++++++++--------
> 1 file changed, 65 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
> index 198485fa77f2..ec29ea76b818 100644
> --- a/drivers/thermal/armada_thermal.c
> +++ b/drivers/thermal/armada_thermal.c
> @@ -47,6 +47,11 @@
> #define CONTROL0_OFFSET 0x0
> #define CONTROL1_OFFSET 0x4
>
> +/* TSEN refers to the temperature sensors within the AP */
> +#define CONTROL0_TSEN_START BIT(0)
> +#define CONTROL0_TSEN_RESET BIT(1)
> +#define CONTROL0_TSEN_ENABLE BIT(2)
> +
> struct armada_thermal_data;
>
> /* Marvell EBU Thermal Sensor Dev Structure */
> @@ -66,15 +71,17 @@ struct armada_thermal_data {
> bool (*is_valid)(struct armada_thermal_priv *);
>
> /* Formula coeficients: temp = (b - m * reg) / div */
> - unsigned long coef_b;
> - unsigned long coef_m;
> - unsigned long coef_div;
> + s64 coef_b;
> + s64 coef_m;
> + u32 coef_div;
> bool inverted;
> + bool signed_sample;
>
> /* Register shift and mask to access the sensor temperature */
> unsigned int temp_shift;
> unsigned int temp_mask;
> u32 is_valid_bit;
> + bool needs_control0;
> };
>
> static void armadaxp_init_sensor(struct platform_device *pdev,
> @@ -154,6 +161,18 @@ static void armada380_init_sensor(struct platform_device *pdev,
> }
> }
>
> +static void armada_ap806_init_sensor(struct platform_device *pdev,
> + struct armada_thermal_priv *priv)
> +{
> + u32 reg;
> +
> + reg = readl_relaxed(priv->control0);
> + reg &= ~CONTROL0_TSEN_RESET;
> + reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE;
> + writel(reg, priv->control0);
> + msleep(10);
> +}
> +
> static bool armada_is_valid(struct armada_thermal_priv *priv)
> {
> u32 reg = readl_relaxed(priv->status);
> @@ -165,8 +184,8 @@ static int armada_get_temp(struct thermal_zone_device *thermal,
> int *temp)
> {
> struct armada_thermal_priv *priv = thermal->devdata;
> - unsigned long reg;
> - unsigned long m, b, div;
> + u32 reg, div;
> + s64 sample, b, m;
>
> /* Valid check */
> if (priv->data->is_valid && !priv->data->is_valid(priv)) {
> @@ -177,6 +196,11 @@ static int armada_get_temp(struct thermal_zone_device *thermal,
>
> reg = readl_relaxed(priv->status);
> reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
> + if (priv->data->signed_sample)
> + /* The most significant bit is the sign bit */
> + sample = sign_extend32(reg, fls(priv->data->temp_mask) - 1);
> + else
> + sample = reg;
>
> /* Get formula coeficients */
> b = priv->data->coef_b;
> @@ -184,9 +208,12 @@ static int armada_get_temp(struct thermal_zone_device *thermal,
> div = priv->data->coef_div;
>
> if (priv->data->inverted)
> - *temp = ((m * reg) - b) / div;
> + *temp = (m * sample) - b;
> else
> - *temp = (b - (m * reg)) / div;
> + *temp = b - (m * sample);
> +
> + do_div(*temp, div);
> +
> return 0;
> }
>
> @@ -198,8 +225,8 @@ static const struct armada_thermal_data armadaxp_data = {
> .init_sensor = armadaxp_init_sensor,
> .temp_shift = 10,
> .temp_mask = 0x1ff,
> - .coef_b = 3153000000UL,
> - .coef_m = 10000000UL,
> + .coef_b = 3153000000ULL,
> + .coef_m = 10000000ULL,
> .coef_div = 13825,
> };
>
> @@ -209,8 +236,8 @@ static const struct armada_thermal_data armada370_data = {
> .is_valid_bit = BIT(9),
> .temp_shift = 10,
> .temp_mask = 0x1ff,
> - .coef_b = 3153000000UL,
> - .coef_m = 10000000UL,
> + .coef_b = 3153000000ULL,
> + .coef_m = 10000000ULL,
> .coef_div = 13825,
> };
>
> @@ -220,8 +247,8 @@ static const struct armada_thermal_data armada375_data = {
> .is_valid_bit = BIT(10),
> .temp_shift = 0,
> .temp_mask = 0x1ff,
> - .coef_b = 3171900000UL,
> - .coef_m = 10000000UL,
> + .coef_b = 3171900000ULL,
> + .coef_m = 10000000ULL,
> .coef_div = 13616,
> };
>
> @@ -231,12 +258,26 @@ static const struct armada_thermal_data armada380_data = {
> .is_valid_bit = BIT(10),
> .temp_shift = 0,
> .temp_mask = 0x3ff,
> - .coef_b = 1172499100UL,
> - .coef_m = 2000096UL,
> + .coef_b = 1172499100ULL,
> + .coef_m = 2000096ULL,
> .coef_div = 4201,
> .inverted = true,
> };
>
> +static const struct armada_thermal_data armada_ap806_data = {
> + .is_valid = armada_is_valid,
> + .init_sensor = armada_ap806_init_sensor,
> + .is_valid_bit = BIT(16),
> + .temp_shift = 0,
> + .temp_mask = 0x3ff,
> + .coef_b = -150000LL,
> + .coef_m = 423ULL,
> + .coef_div = 1,
> + .inverted = true,
> + .signed_sample = true,
> + .needs_control0 = true,
> +};
> +
> static const struct of_device_id armada_thermal_id_table[] = {
> {
> .compatible = "marvell,armadaxp-thermal",
> @@ -255,6 +296,10 @@ static const struct of_device_id armada_thermal_id_table[] = {
> .data = &armada380_data,
> },
> {
> + .compatible = "marvell,armada-ap806-thermal",
> + .data = &armada_ap806_data,
> + },
> + {
> /* sentinel */
> },
> };
> @@ -296,6 +341,11 @@ static int armada_thermal_probe(struct platform_device *pdev)
> */
> if (resource_size(res) == LEGACY_CONTROL_MEM_LEN) {
> /* ->control0 unavailable in this configuration */
> + if (priv->data->needs_control0) {
> + dev_err(&pdev->dev, "No access to control0 register\n");
> + return -EINVAL;
> + }
> +
> priv->control1 = control + LEGACY_CONTROL1_OFFSET;
> } else {
> priv->control0 = control + CONTROL0_OFFSET;
> --
> 2.11.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-18 16:05 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-18 14:36 [PATCH v4 00/12] Armada thermal: improvements and A7K/A8K SoCs support Miquel Raynal
2017-12-18 14:36 ` [PATCH v4 01/12] dt-bindings: thermal: Describe Armada AP806 and CP110 Miquel Raynal
[not found] ` <20171218143643.7714-2-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-18 20:33 ` Baruch Siach
2017-12-19 0:43 ` Miquel RAYNAL
2017-12-19 6:09 ` Baruch Siach
[not found] ` <20171219060918.nr4ojwpmqf6ju6od-MwjkAAnuF3khR1HGirfZ1z4kX+cae0hd@public.gmane.org>
2017-12-19 7:44 ` Miquel RAYNAL
2017-12-18 14:36 ` [PATCH v4 02/12] thermal: armada: Use msleep for long delays Miquel Raynal
2017-12-18 14:36 ` [PATCH v4 04/12] thermal: armada: Clarify control registers accesses Miquel Raynal
[not found] ` <20171218143643.7714-5-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-18 20:35 ` Baruch Siach
2017-12-19 0:32 ` Miquel RAYNAL
2017-12-19 5:51 ` Baruch Siach
[not found] ` <20171219055154.f23leaob3zndmmqo-MwjkAAnuF3khR1HGirfZ1z4kX+cae0hd@public.gmane.org>
2017-12-19 8:08 ` Miquel RAYNAL
2017-12-19 8:19 ` Baruch Siach
2017-12-19 8:23 ` Miquel RAYNAL
2017-12-18 14:36 ` [PATCH v4 09/12] thermal: armada: Change sensors trim default value Miquel Raynal
[not found] ` <20171218143643.7714-10-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-18 16:08 ` Gregory CLEMENT
[not found] ` <20171218143643.7714-1-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-18 14:36 ` [PATCH v4 03/12] thermal: armada: Simplify the check of the validity bit Miquel Raynal
2017-12-18 14:36 ` [PATCH v4 05/12] thermal: armada: Use real status register name Miquel Raynal
[not found] ` <20171218143643.7714-6-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-18 15:58 ` Gregory CLEMENT
2017-12-18 14:36 ` [PATCH v4 06/12] thermal: armada: Add support for Armada AP806 Miquel Raynal
[not found] ` <20171218143643.7714-7-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-18 16:05 ` Gregory CLEMENT [this message]
[not found] ` <87y3m0hvik.fsf-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-19 0:27 ` Miquel RAYNAL
2017-12-18 14:36 ` [PATCH v4 07/12] thermal: armada: Add support for Armada CP110 Miquel Raynal
[not found] ` <20171218143643.7714-8-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-18 16:07 ` Gregory CLEMENT
2017-12-18 14:36 ` [PATCH v4 08/12] thermal: armada: Update Kconfig and module description Miquel Raynal
[not found] ` <20171218143643.7714-9-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-12-18 16:07 ` Gregory CLEMENT
2017-12-18 14:36 ` [PATCH v4 10/12] thermal: armada: Wait sensors validity before exiting the init callback Miquel Raynal
2017-12-18 16:12 ` Gregory CLEMENT
2017-12-18 14:36 ` [PATCH v4 11/12] thermal: armada: Give meaningful names to the thermal zones Miquel Raynal
2017-12-18 16:12 ` Gregory CLEMENT
2017-12-18 14:36 ` [PATCH v4 12/12] ARM64: dts: marvell: Add thermal support for A7K/A8K Miquel Raynal
2017-12-18 16:13 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87y3m0hvik.fsf@free-electrons.com \
--to=gregory.clement-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=andrew-g2DYL2Zd6BY@public.gmane.org \
--cc=antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=davidsn-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=nadavh-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).