From: Mikhail Rudenko <mike.rudenko@gmail.com>
To: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] media: dt-bindings: media: i2c: document OV4689 DT bindings
Date: Fri, 15 Jul 2022 00:43:04 +0300 [thread overview]
Message-ID: <87zghb8j51.fsf@gmail.com> (raw)
In-Reply-To: <YtCGeBp5U18ljyuX@valkosipuli.retiisi.eu>
On 2022-07-15 at 00:11 +03, Sakari Ailus <sakari.ailus@iki.fi> wrote:
> Hi Mikhail,
>
> Thanks for the patch.
>
> On Tue, Jul 12, 2022 at 05:19:09PM +0300, Mikhail Rudenko wrote:
>> Add device-tree binding documentation for OV4689 image sensor driver,
>> and the relevant MAINTAINERS entries.
>>
>> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
>> ---
>> .../bindings/media/i2c/ovti,ov4689.yaml | 122 ++++++++++++++++++
>> MAINTAINERS | 7 +
>> 2 files changed, 129 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>> new file mode 100644
>> index 000000000000..6bdebe5862b4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>> @@ -0,0 +1,122 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Omnivision OV4689 CMOS Sensor Device Tree Bindings
>> +
>> +maintainers:
>> + - Mikhail Rudenko <mike.rudenko@gmail.com>
>> +
>> +description: |-
>> + The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
>> + image sensor. Ihis chip supports high frame rate speeds up to 90 fps
>> + at 2688x1520 resolution. It is programmable through an I2C
>> + interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
>> + connection.
>> +
>> +allOf:
>> + - $ref: /schemas/media/video-interface-devices.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: ovti,ov4689
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + clock-names:
>> + description:
>> + External clock for the sensor.
>> + items:
>> + - const: xclk
>> +
>> + dovdd-supply:
>> + description:
>> + Definition of the regulator used as Digital I/O voltage supply.
>> +
>> + avdd-supply:
>> + description:
>> + Definition of the regulator used as Analog voltage supply.
>> +
>> + dvdd-supply:
>> + description:
>> + Definition of the regulator used as Digital core voltage supply.
>> +
>> + powerdown-gpios:
>> + maxItems: 1
>> + description:
>> + Reference to the GPIO connected to the powerdown pin (active low).
>> +
>> + reset-gpios:
>> + maxItems: 1
>> + description:
>> + Reference to the GPIO connected to the reset pin (active low).
>> +
>> + orientation: true
>> +
>> + rotation: true
>> +
>> + port:
>> + $ref: /schemas/graph.yaml#/$defs/port-base
>> + additionalProperties: false
>> + description:
>> + Output port node, single endpoint describing the CSI-2 transmitter.
>> +
>> + properties:
>> + endpoint:
>> + $ref: /schemas/media/video-interfaces.yaml#
>> + unevaluatedProperties: false
>
> The number of lanes is needed, please require data-lanes property here (as
> well as add it to the example).
Thanks for review, will fix in v2
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> + - clock-names
>> + - dovdd-supply
>> + - avdd-supply
>> + - dvdd-supply
>> + - powerdown-gpios
>> + - reset-gpios
>> + - port
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/gpio/gpio.h>
>> +
>> + i2c {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + ov4689: camera@36 {
>> + compatible = "ovti,ov4689";
>> + reg = <0x36>;
>> +
>> + clocks = <&ov4689_clk>;
>> + clock-names = "xclk";
>> +
>> + avdd-supply = <&ov4689_avdd>;
>> + dovdd-supply = <&ov4689_dovdd>;
>> + dvdd-supply = <&ov4689_dvdd>;
>> +
>> + powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
>> + reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
>> +
>> + orientation = <2>;
>> + rotation = <0>;
>> +
>> + port {
>> + wcam_out: endpoint {
>> + remote-endpoint = <&mipi_in_wcam>;
>> + };
>> + };
>> + };
>> + };
>> +
>> +...
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index f468864fd268..63c4844f26e6 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -14523,6 +14523,13 @@ S: Maintained
>> T: git git://linuxtv.org/media_tree.git
>> F: drivers/media/i2c/ov2740.c
>>
>> +OMNIVISION OV4689 SENSOR DRIVER
>> +M: Mikhail Rudenko <mike.rudenko@gmail.com>
>> +L: linux-media@vger.kernel.org
>> +S: Maintained
>> +T: git git://linuxtv.org/media_tree.git
>> +F: Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>> +
>> OMNIVISION OV5640 SENSOR DRIVER
>> M: Steve Longerbeam <slongerbeam@gmail.com>
>> L: linux-media@vger.kernel.org
--
Best regards,
Mikhail Rudenko
next prev parent reply other threads:[~2022-07-14 21:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-12 14:19 [PATCH 0/2] Add Omnivision OV4689 image sensor driver Mikhail Rudenko
2022-07-12 14:19 ` [PATCH 1/2] media: dt-bindings: media: i2c: document OV4689 DT bindings Mikhail Rudenko
2022-07-12 15:12 ` Krzysztof Kozlowski
2022-07-12 16:40 ` Mikhail Rudenko
2022-07-14 21:11 ` Sakari Ailus
2022-07-14 21:43 ` Mikhail Rudenko [this message]
2022-08-15 16:59 ` [PATCH 0/2] Add Omnivision OV4689 image sensor driver Mikhail Rudenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zghb8j51.fsf@gmail.com \
--to=mike.rudenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).