Re: [PATCH v2 2/5] dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 26/12/2022 23:38, Okan Sahin wrote:
> The bindings for MAX77541 MFD driver. It also


1. You did not follow entirely my advice here. Read again what I asked
you to fix in commit msg.

2. No improvements in subject - ignored comment.


> includes MAX77540 driver whose regmap is covered by MAX77541.
> 
> Signed-off-by: Okan Sahin <okan.sahin@analog.com>
> ---
>  .../devicetree/bindings/mfd/adi,max77541.yaml | 102 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 103 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77541.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
> new file mode 100644
> index 000000000000..50f93cb0bb66
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MAX77540/MAX77541 PMIC from ADI.

Drop tralling full stop.

> +
> +maintainers:
> +  - Okan Sahin <okan.sahin@analog.com>
> +
> +description: |
> +  MAX77540 is a Power Management IC with 2 buck regulators.
> +
> +  MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,max77540
> +      - adi,max77541
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  regulators:
> +    $ref: ../regulator/adi,max77541-regulator.yaml#

Wrong path - it should be full path with /schemas/ just like it was last
time. However such file does not exist, so again as I said - you did not
test this patch. It's non-bisectable patchset. Order it properly. don't
ignore the comments.

> +
> +  adc:
> +    type: object
> +    additionalProperties: false
> +    properties:
> +      compatible:
> +        const: adi,max77541-adc

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

> +
> +    required:
> +      - compatible
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: adi,max77540
> +    then:
> +      properties:
> +        regulator:
> +          properties:
> +            compatible:
> +              const: adi,max77540-regulator
> +    else:
> +      properties:
> +        regulator:
> +          properties:
> +            compatible:
> +              const: adi,max77541-regulator
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pmic@69 {
> +            compatible = "adi,max77541";
> +            reg = <0x69>;
> +            interrupt-parent = <&gpio>;
> +            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
> +
> +            regulators {
> +                BUCK1 {
> +                    regulator-min-microvolt = <500000>;
> +                    regulator-max-microvolt = <5200000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                };
> +                BUCK2 {
> +                    regulator-min-microvolt = <500000>;
> +                    regulator-max-microvolt = <5200000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                };
> +            };
> +
> +            adc {
> +                compatible = "adi,max77541-adc";
> +            };
> +        };
> +    };
> +

Stray new line. Drop it.

Best regards,
Krzysztof