From: Jose Abreu <Jose.Abreu@synopsys.com>
To: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Jose Abreu <Jose.Abreu@synopsys.com>,
Carlos Palminha <CARLOS.PALMINHA@synopsys.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v2 4/4] dt-bindings: media: Document Synopsys Designware HDMI RX
Date: Fri, 16 Jun 2017 11:07:43 +0100 [thread overview]
Message-ID: <8a3aafeb2e38ae2deaa8703c5daee048c075b186.1497607316.git.joabreu@synopsys.com> (raw)
In-Reply-To: <cover.1497607315.git.joabreu@synopsys.com>
In-Reply-To: <cover.1497607315.git.joabreu@synopsys.com>
Document the bindings for the Synopsys Designware HDMI RX.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
---
.../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
new file mode 100644
index 0000000..f69eee5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
@@ -0,0 +1,41 @@
+Synopsys DesignWare HDMI RX Decoder
+===================================
+
+This document defines device tree properties for the Synopsys DesignWare HDMI
+RX Decoder (DWC HDMI RX). It doesn't constitute a device tree binding
+specification by itself but is meant to be referenced by platform-specific
+device tree bindings.
+
+When referenced from platform device tree bindings the properties defined in
+this document are defined as follows.
+
+- reg: Memory mapped base address and length of the DWC HDMI RX registers.
+
+- interrupts: Reference to the DWC HDMI RX interrupt and 5v sense interrupt.
+
+- snps,hdmi-phy-jtag-addr: JTAG address of the phy to be used.
+
+- snps,hdmi-phy-version: Version of the phy to be used.
+
+- snps,hdmi-phy-cfg-clk: Value of the cfg clk that is delivered to phy.
+
+- snps,hdmi-phy-driver: *Exact* name of the phy driver to be used.
+
+- snps,hdmi-ctl-cfg-clk: Value of the cfg clk that is delivered to the
+controller.
+
+A sample binding is now provided. The compatible string is for a wrapper driver
+which then instantiates the Synopsys Designware HDMI RX decoder driver.
+
+Example:
+
+dw_hdmi_wrapper: dw-hdmi-wrapper@0 {
+ compatible = "snps,dw-hdmi-rx-wrapper";
+ reg = <0x0 0x10000>; /* controller regbank */
+ interrupts = <1 3>; /* controller interrupt + 5v sense interrupt */
+ snps,hdmi-phy-driver = "dw-hdmi-phy-e405";
+ snps,hdmi-phy-version = <405>;
+ snps,hdmi-phy-cfg-clk = <25>; /* MHz */
+ snps,hdmi-ctl-cfg-clk = <25>; /* MHz */
+ snps,hdmi-phy-jtag-addr = /bits/ 8 <0xfc>;
+};
--
1.9.1
prev parent reply other threads:[~2017-06-16 10:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-16 10:07 [PATCH v2 0/4] Synopsys Designware HDMI Video Capture Controller + PHY Jose Abreu
2017-06-16 10:07 ` [PATCH v2 1/4] [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver Jose Abreu
2017-06-16 10:07 ` [PATCH v2 2/4] [media] platform: Add Synopsys Designware HDMI RX Controller Driver Jose Abreu
2017-06-16 12:38 ` Hans Verkuil
[not found] ` <25d20060-f6b7-3a37-0509-39a734e6660a-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org>
2017-06-16 13:21 ` Jose Abreu
[not found] ` <3a1abd40-4503-44f1-7cc5-ad757a7c5572-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2017-06-16 13:44 ` Hans Verkuil
[not found] ` <0ebac69e-8de3-e65e-d6f5-dfb4fed3585c-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org>
2017-06-16 15:52 ` Jose Abreu
[not found] ` <900bfa50-2cc3-2b33-8531-2c65ebd3a981-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2017-06-16 15:59 ` Hans Verkuil
2017-06-16 10:07 ` [PATCH v2 3/4] MAINTAINERS: Add entry for Synopsys Designware HDMI drivers Jose Abreu
2017-06-16 10:07 ` Jose Abreu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8a3aafeb2e38ae2deaa8703c5daee048c075b186.1497607316.git.joabreu@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=CARLOS.PALMINHA@synopsys.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).