From: Eddie James <eajames@linux.ibm.com>
To: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: linux-hwmon@vger.kernel.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-aspeed@lists.ozlabs.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
andrew@codeconstruct.com.au, joel@jms.id.au, linux@roeck-us.net,
chanh@os.amperecomputing.com, jic23@kernel.org,
dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org
Subject: Re: [PATCH v7 RESEND 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation
Date: Mon, 6 Oct 2025 08:44:55 -0500 [thread overview]
Message-ID: <8ab87732-71e1-4101-9aed-14f68c27fea1@linux.ibm.com> (raw)
In-Reply-To: <20251003150102.00007dae@huawei.com>
On 10/3/25 9:01 AM, Jonathan Cameron wrote:
> On Wed, 1 Oct 2025 09:44:37 -0500
> Eddie James <eajames@linux.ibm.com> wrote:
>
>> The DPS310 is a barometric pressure and temperature sensor with
>> an I2C interface. Remove it from trivial-devices.yaml and add its
>> own documentation.
> Hi Eddie,
>
> Why? I guess you need the #io-channel-cells which trivial devices
> doesn't allow because you have a consumer driver?
Correct.
>
> Obviously the binding patch shouldn't mention that, but it could call
> out that there can be such consumers.
OK, I can add that.
>
> I'd also expect to see some supplies even if the driver doesn't yet
> explicitly handle them.
You mean in the example section? Sure. I'll send a patch separately
since the rest is merged
Thanks,
Eddie
>
> Jonathan
>
>> Signed-off-by: Eddie James <eajames@linux.ibm.com>
>> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
>> ---
>> .../iio/pressure/infineon,dps310.yaml | 44 +++++++++++++++++++
>> .../devicetree/bindings/trivial-devices.yaml | 2 -
>> MAINTAINERS | 1 +
>> 3 files changed, 45 insertions(+), 2 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
>> new file mode 100644
>> index 0000000000000..7c0782e2a821b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
>> @@ -0,0 +1,44 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Infineon DPS310 barometric pressure and temperature sensor
>> +
>> +maintainers:
>> + - Eddie James <eajames@linux.ibm.com>
>> +
>> +description:
>> + The DPS310 is a barometric pressure and temperature sensor with an I2C
>> + interface.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - infineon,dps310
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + "#io-channel-cells":
>> + const: 0
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + i2c {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pressure-sensor@76 {
>> + compatible = "infineon,dps310";
>> + reg = <0x76>;
>> + #io-channel-cells = <0>;
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
>> index 7609acaa752d5..a72b7fabc7034 100644
>> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
>> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
>> @@ -127,8 +127,6 @@ properties:
>> - ibm,cffps2
>> # IBM On-Chip Controller hwmon device
>> - ibm,p8-occ-hwmon
>> - # Infineon barometric pressure and temperature sensor
>> - - infineon,dps310
>> # Infineon IR36021 digital POL buck controller
>> - infineon,ir36021
>> # Infineon IRPS5401 Voltage Regulator (PMIC)
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 0c8281ea4cc64..92b9854a0e07d 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -12191,6 +12191,7 @@ INFINEON DPS310 Driver
>> M: Eddie James <eajames@linux.ibm.com>
>> L: linux-iio@vger.kernel.org
>> S: Maintained
>> +F: Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
>> F: drivers/iio/pressure/dps310.c
>>
>> INFINEON PEB2466 ASoC CODEC
>
next prev parent reply other threads:[~2025-10-06 13:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-01 14:44 [PATCH v7 RESEND 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-10-01 14:44 ` [PATCH v7 RESEND 1/7] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
2025-10-01 14:44 ` [PATCH v7 RESEND 2/7] dt-bindings: arm: aspeed: add IBM Bonnell board Eddie James
2025-10-01 14:44 ` [PATCH v7 RESEND 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James
2025-10-03 14:01 ` Jonathan Cameron
2025-10-06 13:44 ` Eddie James [this message]
2025-10-07 15:48 ` Jonathan Cameron
2025-10-01 14:44 ` [PATCH v7 RESEND 4/7] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James
2025-10-01 14:56 ` Guenter Roeck
2025-10-02 21:37 ` Guenter Roeck
2025-10-01 14:44 ` [PATCH v7 RESEND 5/7] dt-bindings: hwmon: max31790: Use addressed fan nodes Eddie James
2025-10-02 21:38 ` Guenter Roeck
2025-10-01 14:44 ` [PATCH v7 RESEND 6/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-10-01 14:44 ` [PATCH v7 RESEND 7/7] ARM: dts: aspeed: Fix max31785 fan properties Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8ab87732-71e1-4101-9aed-14f68c27fea1@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=andrew@codeconstruct.com.au \
--cc=andy@kernel.org \
--cc=chanh@os.amperecomputing.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=jonathan.cameron@huawei.com \
--cc=krzk+dt@kernel.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).