From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?utf-8?B?U8O2cmVu?= Brinkmann Subject: Re: [PATCH 1/2] i2c: Add driver for Cadence I2C controller Date: Fri, 28 Feb 2014 19:06:29 -0800 Message-ID: <8af0e222-6337-4ec4-b718-099a9decc5ec@TX2EHSMHS034.ehs.local> References: <1393632046-20062-1-git-send-email-soren.brinkmann@xilinx.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <1393632046-20062-1-git-send-email-soren.brinkmann@xilinx.com> Sender: linux-doc-owner@vger.kernel.org To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Rob Landley , Russell King , Michal Simek , Wolfram Sang Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org, devicetree@vger.kernel.org, linux-i2c@vger.kernel.org, Harini Katakam , =?utf-8?B?U8O2cmVu?= Brinkmann List-Id: devicetree@vger.kernel.org On Fri, 2014-02-28 at 04:00PM -0800, Soren Brinkmann wrote: > Add a driver for the Cadence I2C controller. This controller is for > example found in Xilinx Zynq. >=20 > Signed-off-by: Soren Brinkmann > --- > .../devicetree/bindings/i2c/i2c-cadence.txt | 21 + > MAINTAINERS | 1 + > drivers/i2c/busses/Kconfig | 7 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-cadence.c | 901 +++++++++++= ++++++++++ > 5 files changed, 931 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-cadence= =2Etxt > create mode 100644 drivers/i2c/busses/i2c-cadence.c >=20 [...] > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index f5ed03164d86..7806c1654068 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -375,6 +375,13 @@ config I2C_BLACKFIN_TWI_CLK_KHZ > help > The unit of the TWI clock is kHz. > =20 > +config I2C_CADENCE > + tristate "Cadence I2C Controller" > + depends on ARCH_ZYNQ This can be reduced to a dependency on COMMON_CLK only, I think. S=C3=B6ren