Re: [PATCH 3/3] arm64: dts: qcom: qcs8300: Add clocks for QoS configuration

[Krzysztof Kozlowski <krzk@kernel.org>]

On 28/11/2025 16:01, Odelu Kukatla wrote:
> Add clocks which need to be enabled for configuring QoS on
> qcs8300 SoC.
> 
> Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/monaco.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
> index 816fa2af8a9a..6139511ea525 100644
> --- a/arch/arm64/boot/dts/qcom/monaco.dtsi
> +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
> @@ -2226,6 +2226,10 @@
>  			reg = <0x0 0x016c0000 0x0 0x17080>;
>  			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
> +			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>,
> +				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
> +				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;

Your binding said all interconnects have clocks, so please update all of
them. Not only three out of 10-or-whatever-in-total-you-have.


Best regards,
Krzysztof