Re: [PATCH 3/4] arm64: dts: meson: axg: add clk measure support

[Jerome Brunet <jbrunet@baylibre.com>]

On Thu, 2019-01-17 at 20:57 +0100, Martin Blumenstingl wrote:
> Hi Jerome,
> 
> On Thu, Jan 17, 2019 at 5:48 PM Jerome Brunet <jbrunet@baylibre.com> wrote:
> > Add the clock measure device to the axg SoC family
> > 
> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> > ---
> >  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> > b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> > index 0e0abb1a03e2..94ea36a2417a 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> > @@ -1611,6 +1611,11 @@
> >                                 status = "disabled";
> >                         };
> > 
> > +                       clk_msr: clock-sensor@18000 {
> in the dt-bindings specify "clock-measure@..."

That's the exemple, not a specification, AFAIK.
I'm not sure I see the problem ?

> this also applies to patch 4/4 from this series


Anyway, The node was not placed correctly in g12, I might as well rename it. I
don't really care

> 
> 
> [0] 
> https://elixir.bootlin.com/linux/v5.0-rc1/source/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt