From: Shreeya Patel <shreeya.patel@collabora.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: lars@metafoo.de, robh+dt@kernel.org, Zhigang.Shi@liteon.com,
krisman@collabora.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@collabora.com, alvaro.soliverez@collabora.com,
andy.shevchenko@gmail.com, digetx@gmail.com
Subject: Re: [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
Date: Sun, 19 Jun 2022 18:27:15 +0530 [thread overview]
Message-ID: <8dedf7d8-4760-dedc-0b47-fcdb0d32a3d9@collabora.com> (raw)
In-Reply-To: <20220619133415.5b3762d3@jic23-huawei>
On 19/06/22 18:04, Jonathan Cameron wrote:
> On Wed, 15 Jun 2022 19:21:29 +0530
> Shreeya Patel <shreeya.patel@collabora.com> wrote:
>
>> Add devicetree bindings for ltrf216a ambient light sensor.
>>
>> Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
>> ---
>> Changes in v5
>> - Remove deprecated string 'ltr' from the bindings.
>>
>> Changes in v3
>> - Fix indentation in the example section
>>
>> Changes in v2
>> - Take over the maintainership for the bindings
>> - Add interrupt and power supply property in DT bindings
>>
>> .../bindings/iio/light/liteon,ltrf216a.yaml | 50 +++++++++++++++++++
>> 1 file changed, 50 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
>> new file mode 100644
>> index 000000000000..f256ff2e744c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
>> @@ -0,0 +1,50 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: LTRF216A Ambient Light Sensor
>> +
>> +maintainers:
>> + - Shreeya Patel <shreeya.patel@collabora.com>
>> +
>> +description:
>> + Ambient light sensing with an i2c interface.
>> +
>> +properties:
>> + compatible:
>> + const:
>> + - liteon,ltrf216a
> I assume you figured this out from the build bot error.
>
> const: liteon,ltrf216a
>
> Please make sure to do what that message from Rob's bot says and test your bindings
> before sending v7.
Hi Jonathan,
Sorry for the noise, I wasn't seeing this error before when I tested it
on my machine.
I just did a make clean and was able to see the error after that. I have
fixed it now for v7.
Thanks,
Shreeya Patel
>
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + vdd-supply:
>> + description: Regulator that provides power to the sensor.
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> +
>> + i2c {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + light-sensor@53 {
>> + compatible = "liteon,ltrf216a";
>> + reg = <0x53>;
>> + vdd-supply = <&vdd_regulator>;
>> + interrupt-parent = <&gpio0>;
>> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
>> + };
>> + };
next prev parent reply other threads:[~2022-06-19 12:57 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-15 13:51 [PATCH v6 0/2] Add LTRF216A Driver Shreeya Patel
2022-06-15 13:51 ` [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings Shreeya Patel
2022-06-15 17:20 ` Rob Herring
2022-06-19 12:34 ` Jonathan Cameron
2022-06-19 12:57 ` Shreeya Patel [this message]
2022-06-15 13:51 ` [PATCH v6 2/2] iio: light: Add support for ltrf216a sensor Shreeya Patel
2022-06-15 16:32 ` Andy Shevchenko
2022-06-19 12:44 ` Jonathan Cameron
2022-07-06 20:52 ` Dmitry Osipenko
2022-07-06 20:52 ` Dmitry Osipenko
2022-07-06 20:59 ` Dmitry Osipenko
2022-07-06 21:00 ` Dmitry Osipenko
2022-07-06 21:09 ` Dmitry Osipenko
2022-07-06 22:48 ` Shreeya Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8dedf7d8-4760-dedc-0b47-fcdb0d32a3d9@collabora.com \
--to=shreeya.patel@collabora.com \
--cc=Zhigang.Shi@liteon.com \
--cc=alvaro.soliverez@collabora.com \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=digetx@gmail.com \
--cc=jic23@kernel.org \
--cc=kernel@collabora.com \
--cc=krisman@collabora.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox