From: Krzysztof Kozlowski <krzk@kernel.org>
To: barnabas.czeman@mainlining.org
Cc: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jonathan Albrieux <jonathan.albrieux@gmail.com>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux@mainlining.org,
Danila Tikhonov <danila@jiaxyga.com>
Subject: Re: [PATCH v3 3/4] dt-bindings: iio: imu: magnetometer: Add ak09118
Date: Mon, 12 Aug 2024 08:17:52 +0200 [thread overview]
Message-ID: <8e4a2774-ed58-49cb-b970-b3c05c9c1daa@kernel.org> (raw)
In-Reply-To: <45dc7e6de63f5b55f6a3488a82ad5b0d@mainlining.org>
On 11/08/2024 20:28, barnabas.czeman@mainlining.org wrote:
> On 2024-08-10 14:15, Krzysztof Kozlowski wrote:
>> On 09/08/2024 22:25, Barnabás Czémán wrote:
>>> From: Danila Tikhonov <danila@jiaxyga.com>
>>>
>>> Document asahi-kasei,ak09918 compatible.
>>
>> Not much improved here.
> I have removed Reviewed-by because fallback compatible is a different
> approach
> and I would not mind second look.
You received specific comments. You ignored them, so I replied that you
ignored them. And your excuse is that you ask for review? This does not
work like this. Read CAREFULLY form letter below.
>>
>> <form letter>
>> This is a friendly reminder during the review process.
>>
>> It seems my or other reviewer's previous comments were not fully
>> addressed. Maybe the feedback got lost between the quotes, maybe you
>> just forgot to apply it. Please go back to the previous discussion and
>> either implement all requested changes or keep discussing them.
>>
>> Thank you.
>> </form letter>
>>
>>>
>>> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
>>> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>>> ---
>>> .../devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
>>> | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
>>> b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
>>> index 9790f75fc669..ff93a935363f 100644
>>> ---
>>> a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
>>> +++
>>> b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
>>> @@ -18,6 +18,9 @@ properties:
>>> - asahi-kasei,ak09911
>>> - asahi-kasei,ak09912
>>> - asahi-kasei,ak09916
>>> + - items:
>>> + - const: asahi-kasei,ak09918
>>> + - const: asahi-kasei,ak09912
>>
>> Why? Your driver suggests it might not be compatible... Can device bind
>> using ak09912 and operate up to ak09912 extend?
> It is register compatible and it can bind on 09112, as I understand
> fallback compatible
ok
> was a request from Connor and Jonathan in the previous round.
Not entirely, you should read comments more carefully.
Best regards,
Krzysztof
next prev parent reply other threads:[~2024-08-12 6:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-09 20:25 [PATCH v3 0/4] Add support for AK09918 Barnabás Czémán
2024-08-09 20:25 ` [PATCH v3 1/4] iio: magnetometer: ak8975: Relax failure on unknown id Barnabás Czémán
2024-08-09 20:25 ` [PATCH v3 2/4] iio: magnetometer: ak8975: Fix reading for ak099xx sensors Barnabás Czémán
2024-08-17 12:26 ` Jonathan Cameron
2024-08-17 12:58 ` barnabas.czeman
2024-08-09 20:25 ` [PATCH v3 3/4] dt-bindings: iio: imu: magnetometer: Add ak09118 Barnabás Czémán
2024-08-10 12:15 ` Krzysztof Kozlowski
2024-08-11 18:28 ` barnabas.czeman
2024-08-12 6:17 ` Krzysztof Kozlowski [this message]
2024-08-17 12:32 ` Jonathan Cameron
2024-08-17 12:46 ` Jonathan Cameron
2024-08-09 20:25 ` [PATCH v3 4/4] iio: magnetometer: ak8975: Add AK09118 support Barnabás Czémán
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8e4a2774-ed58-49cb-b970-b3c05c9c1daa@kernel.org \
--to=krzk@kernel.org \
--cc=barnabas.czeman@mainlining.org \
--cc=conor+dt@kernel.org \
--cc=danila@jiaxyga.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=jonathan.albrieux@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@mainlining.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox