Re: [PATCH v4 0/6] Remodel FlexCAN register r/w APIs for big endian

[Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

[-- Attachment #1.1: Type: text/plain, Size: 1608 bytes --]

On 11/24/2017 02:22 PM, Pankaj Bansal wrote:
> This patch series remodels the FlexCAN register r/w APIs for big endian.
> The endianness is checked based on optional big-endian property in
> device tree. if this property is not present in device tree node then 
> controller is assumed to be little endian. if this property is present then
> controller is assumed to be big endian.
> 
> An exception to this rule is powerpc P1010RDB, which is always
> big-endian, even if big-endian is not present in dts. This is
> checked using p1010-flexcan compatible in dts.
> 
> Therefore, remove p1010-flexcan compatible from imx series dts,
> as their flexcan core is little endian.
> 
> Finally this series adds support for NXP LS1021A SOC in flexcan,
> which is arm based SOC having big-endian FlexCAN controller.
> 
> Pankaj Bansal (6):
>   can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN
>     controllers.
>   can: flexcan: adding platform specific details for LS1021A
>   Documentation : can : flexcan : Add big-endian property to device tree
>   powerpc: dts: P1010: Add endianness property to flexcan node
>   arm: dts: Remove p1010-flexcan compatible from imx series dts
>   arm/dts: Add nodes for flexcan devices present on LS1021A-Rev2 SoC

Applied to can-next.

Thanks,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]