devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: Marek Vasut <marex@denx.de>, <linux-arm-kernel@lists.infradead.org>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>,
	Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Rob Herring <robh@kernel.org>, <devicetree@vger.kernel.org>,
	<kernel@dh-electronics.com>,
	<linux-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH] ARM: dts: stm32: Add phandle to nvmem efuse into STM32MP13xx ethernet DT node
Date: Thu, 27 Jun 2024 14:13:04 +0200	[thread overview]
Message-ID: <8fb70911-a278-43b3-bcaf-c88b43bddb73@foss.st.com> (raw)
In-Reply-To: <20240623191602.67424-1-marex@denx.de>

Hi Marek

On 6/23/24 21:15, Marek Vasut wrote:
> The efuses on STM32MP13xx can be populated with ethernet MAC address.
> Add the nvmem-cells/nvmem-cell-name DT properties to ethernet MAC DT
> nodes to describe the placement of both MAC address fields within the
> efuses, so the ethernet MAC driver can access the efuses and populate
> the correct MAC address into the hardware.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Cc: Christophe Roullier <christophe.roullier@foss.st.com>
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: kernel@dh-electronics.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> ---
>   arch/arm/boot/dts/st/stm32mp131.dtsi | 2 ++
>   arch/arm/boot/dts/st/stm32mp133.dtsi | 2 ++
>   2 files changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
> index f41508195eb51..55f4150524f3c 100644
> --- a/arch/arm/boot/dts/st/stm32mp131.dtsi
> +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
> @@ -1528,6 +1528,8 @@ ethernet1: ethernet@5800a000 {
>   					 <&rcc ETH1RX>,
>   					 <&rcc ETH1STP>,
>   					 <&rcc ETH1CK_K>;
> +				nvmem-cell-names = "mac-address";
> +				nvmem-cells = <&ethernet_mac1_address>;

It should not be defined in soc dtsi file but rather in board file. OTP 
are provisioned by the end customer not by ST. If you order a SoC to ST 
it will not be provisioned OTP MAC addr will be set to 0.

Regards
alex






>   				snps,axi-config = <&stmmac_axi_config_1>;
>   				snps,mixed-burst;
>   				snps,pbl = <2>;
> diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
> index ae2fbc09e93b9..48b6ddb59badf 100644
> --- a/arch/arm/boot/dts/st/stm32mp133.dtsi
> +++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
> @@ -85,6 +85,8 @@ ethernet2: ethernet@5800e000 {
>   			 <&rcc ETH2RX>,
>   			 <&rcc ETH2STP>,
>   			 <&rcc ETH2CK_K>;
> +		nvmem-cell-names = "mac-address";
> +		nvmem-cells = <&ethernet_mac2_address>;
>   		snps,axi-config = <&stmmac_axi_config_2>;
>   		snps,mixed-burst;
>   		snps,pbl = <2>;

  reply	other threads:[~2024-06-27 12:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-23 19:15 [PATCH] ARM: dts: stm32: Add phandle to nvmem efuse into STM32MP13xx ethernet DT node Marek Vasut
2024-06-27 12:13 ` Alexandre TORGUE [this message]
2024-06-28  0:56   ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8fb70911-a278-43b3-bcaf-c88b43bddb73@foss.st.com \
    --to=alexandre.torgue@foss.st.com \
    --cc=christophe.roullier@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@dh-electronics.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=marex@denx.de \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).