From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D967AC43217 for ; Wed, 16 Nov 2022 15:17:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233379AbiKPPQr (ORCPT ); Wed, 16 Nov 2022 10:16:47 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36038 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229702AbiKPPQn (ORCPT ); Wed, 16 Nov 2022 10:16:43 -0500 Received: from mail-ed1-x52f.google.com (mail-ed1-x52f.google.com [IPv6:2a00:1450:4864:20::52f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F35B74FF96 for ; Wed, 16 Nov 2022 07:16:40 -0800 (PST) Received: by mail-ed1-x52f.google.com with SMTP id l11so27058579edb.4 for ; Wed, 16 Nov 2022 07:16:40 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:in-reply-to:from:references:cc:to:subject :user-agent:mime-version:date:message-id:from:to:cc:subject:date :message-id:reply-to; bh=E4wKdyWpTGv9s5gt784ghRI+LQ/q6knA5x3eZOJqgpM=; b=o30aV85ynPbYCL+7J4dC0/LrvGwQe5hOe1NvFeROqOQUqlIxtqb4sKKgfp4Of7rYdN XDwFCAX45VXd4HaxGEzuIYJ0MkTHfpO8NXoQ/V0uN5Y+0k7N3Lrdsjm9ZbgYsxbfA/h/ k+jEnYmrDdcz80O/BMHcvdrAeohMtK6q+Pqyk6FOQP+/bcclesVN56NB0btbyrwMOIfD QwZOZuEcza4f8gS0HXK3C/HhqEbjDwJJ57tb3kswTOCShBqiT1M9OEBTf3qL1SaUZOFH CI2qekQFIvwFkDgCD2UBpjcoo7UMopgXg2rNvHNBGqTzpmOSMbOyzidDQ+JRXm9zo+kW XiOg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:in-reply-to:from:references:cc:to:subject :user-agent:mime-version:date:message-id:x-gm-message-state:from:to :cc:subject:date:message-id:reply-to; bh=E4wKdyWpTGv9s5gt784ghRI+LQ/q6knA5x3eZOJqgpM=; b=VXXEh2jb5Ysk95TPUeqi+isq6AL0am6GOKzg2bSt+Y0kOGconodtuKKFcHtf/yOrCA /DEFuTDbbjWMT9WPCyI9Aj778xKbPc1smw/8603OsRcJguRfl0iFzU8Pa7LvltgswQJa L9PnkvVVABTVmntswl6eCknXnEOrLL5LZJtM90vPt5cq9eRojdFPpWQt3xnxLOHjCMSJ myZuxkpwfPXPVnmQ3hxehpKXpo5a5d9xrQwFLhgGikoXrVeDmFjbDK/toWISOWQYMtQW 17XxG4fedJKCy0XUaPtHZNFpBqbbUAnPzlvIx4yU01Ur7FpxuadY1XHKUNERY9Uw0hJw GApg== X-Gm-Message-State: ANoB5pm34Lh7t52BsA9nh1iqTTXYEiSNZyj0QuJCfUySK1uEG5MUzo/w oED512jAUxnAqK3I9xvzSwiUrA== X-Google-Smtp-Source: AA0mqf54XhbN+OocmwoFdRViebBaJVzLNhV0DSK5uPkj1WYvIBp66+J1MxymSw9ofY+r7b0o1NGrLg== X-Received: by 2002:aa7:c993:0:b0:461:4fd3:377f with SMTP id c19-20020aa7c993000000b004614fd3377fmr19228800edt.234.1668611799554; Wed, 16 Nov 2022 07:16:39 -0800 (PST) Received: from [192.168.31.208] ([194.29.137.22]) by smtp.gmail.com with ESMTPSA id j19-20020a17090686d300b0073c80d008d5sm6870009ejy.122.2022.11.16.07.16.37 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Wed, 16 Nov 2022 07:16:38 -0800 (PST) Message-ID: <904bd243-0ebc-08fb-e4b9-77f7d4f4726d@linaro.org> Date: Wed, 16 Nov 2022 16:16:31 +0100 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:102.0) Gecko/20100101 Thunderbird/102.4.2 Subject: Re: [PATCH 6/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Mi A1 To: Luca Weiss , linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Danila Tikhonov , Anton Bambura , Vladimir Lypak , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Kees Cook , Tony Luck , "Guilherme G. Piccoli" , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org References: <20221116145616.17884-1-luca@z3ntu.xyz> <20221116145616.17884-7-luca@z3ntu.xyz> From: Konrad Dybcio In-Reply-To: <20221116145616.17884-7-luca@z3ntu.xyz> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org On 16/11/2022 15:56, Luca Weiss wrote: > From: Danila Tikhonov > > Add device tree for the Xiaomi Mi A1 (tissot) smartphone. This device is > based on Snapdragon 625 (msm8953) SoC. > > Co-developed-by: Anton Bambura > Signed-off-by: Anton Bambura > Signed-off-by: Danila Tikhonov > Signed-off-by: Vladimir Lypak > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/msm8953-xiaomi-tissot.dts | 317 ++++++++++++++++++ > 2 files changed, 318 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 229fa48c8006..9517638b2fdd 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb > +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb > diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts > new file mode 100644 > index 000000000000..d0ee17dbe084 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts > @@ -0,0 +1,317 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2022 The Linux Foundation. All rights reserved. > + */ > +/dts-v1/; > + > +#include "msm8953.dtsi" > +#include "pm8953.dtsi" > +#include "pmi8950.dtsi" > +#include > + > +/ { > + model = "Xiaomi Mi A1"; > + compatible = "xiaomi,tissot", "qcom,msm8953"; > + chassis-type = "handset"; > + qcom,msm-id = <293 0>; > + qcom,board-id = <0x1000b 0x00>; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_key_default>, <&gpio_hall_sensor_default>; > + > + event-hall-sensor { > + label = "Hall Effect Sensor"; > + gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; > + linux,input-type = ; > + linux,code = ; > + linux,can-disable; > + }; > + > + key-volume-up { > + label = "Volume Up"; > + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; > + linux,code = ; > + }; > + }; > + > + reserved-memory { > + /delete-node/ memory@85b00000; Same comments as in previous patches: this and possibly licensing. Konrad > + > + memory@84a00000 { > + reg = <0x0 0x84a00000 0x0 0x1900000>; > + no-map; > + }; > + > + adsp_fw_mem: memory@8d600000 { > + reg = <0x0 0x8d600000 0x0 0x1200000>; > + no-map; > + }; > + > + /delete-node/ memory@8e700000; > + wcnss_fw_mem: memory@8e800000 { > + reg = <0x0 0x8e800000 0x0 0x700000>; > + no-map; > + }; > + > + ramoops@9ff00000 { > + compatible = "ramoops"; > + reg = <0x0 0x9ff00000 0x0 0x00100000>; > + record-size = <0x1000>; > + console-size = <0x80000>; > + ftrace-size = <0x1000>; > + pmsg-size = <0x8000>; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&hsusb_phy { > + vdd-supply = <&pm8953_l3>; > + vdda-pll-supply = <&pm8953_l7>; > + vdda-phy-dpdm-supply = <&pm8953_l13>; > + > + status = "okay"; > +}; > + > +&i2c_2 { > + status = "okay"; > + > + max98927_codec: audio-codec@3a { > + compatible = "maxim,max98927"; > + reg = <0x3a>; > + > + reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; > + > + vmon-slot-no = <1>; > + imon-slot-no = <1>; > + > + #sound-dai-cells = <1>; > + }; > + > + led-controller@45 { > + compatible = "awinic,aw2013"; > + reg = <0x45>; > + > + vcc-supply = <&pm8953_l10>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@0 { > + reg = <0>; > + led-max-microamp = <5000>; > + function = LED_FUNCTION_INDICATOR; > + color = ; > + }; > + }; > +}; > + > +&i2c_3 { > + status = "okay"; > + > + touchscreen@38 { > + compatible = "edt,edt-ft5406"; > + reg = <0x38>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&ts_int_default>; > + > + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&pm8953_l10>; > + > + touchscreen-size-x = <1080>; > + touchscreen-size-y = <1920>; > + }; > +}; > + > +&pm8953_resin { > + linux,code = ; > + status = "okay"; > +}; > + > +&pmi8950_wled { > + qcom,num-strings = <2>; > + qcom,external-pfet; > + qcom,cabc; > + > + status = "okay"; > +}; > + > +&sdhc_1 { > + status = "okay"; > +}; > + > +&sdhc_2 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; > + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; > + > + cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; > + > + status = "okay"; > +}; > + > +&rpm_requests { > + regulators { > + compatible = "qcom,rpm-pm8953-regulators"; > + > + vdd_s1-supply = <&vph_pwr>; > + vdd_s2-supply = <&vph_pwr>; > + vdd_s3-supply = <&vph_pwr>; > + vdd_s4-supply = <&vph_pwr>; > + vdd_s5-supply = <&vph_pwr>; > + vdd_s6-supply = <&vph_pwr>; > + vdd_s7-supply = <&vph_pwr>; > + vdd_l1-supply = <&pm8953_s3>; > + vdd_l2_l3-supply = <&pm8953_s3>; > + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; > + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; > + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; > + > + pm8953_s1: s1 { > + regulator-min-microvolt = <870000>; > + regulator-max-microvolt = <1156000>; > + }; > + > + pm8953_s3: s3 { > + regulator-min-microvolt = <1224000>; > + regulator-max-microvolt = <1224000>; > + }; > + > + pm8953_s4: s4 { > + regulator-min-microvolt = <1900000>; > + regulator-max-microvolt = <2050000>; > + }; > + > + pm8953_l1: l1 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + pm8953_l2: l2 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1225000>; > + }; > + > + pm8953_l3: l3 { > + regulator-min-microvolt = <925000>; > + regulator-max-microvolt = <925000>; > + }; > + > + pm8953_l5: l5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8953_l6: l6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8953_l7: l7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1900000>; > + }; > + > + pm8953_l8: l8 { > + regulator-min-microvolt = <2900000>; > + regulator-max-microvolt = <2900000>; > + }; > + > + pm8953_l9: l9 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + pm8953_l10:l10 { > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <2850000>; > + }; > + > + pm8953_l11: l11 { > + regulator-min-microvolt = <2950000>; > + regulator-max-microvolt = <2950000>; > + }; > + > + pm8953_l12: l12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2950000>; > + }; > + > + pm8953_l13: l13 { > + regulator-min-microvolt = <3125000>; > + regulator-max-microvolt = <3125000>; > + }; > + > + pm8953_l16: l16 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8953_l17: l17 { > + regulator-min-microvolt = <2750000>; > + regulator-max-microvolt = <2850000>; > + }; > + > + pm8953_l19: l19 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1350000>; > + }; > + > + pm8953_l22: l22 { > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + pm8953_l23: l23 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1225000>; > + }; > + }; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; > + > + gpio_hall_sensor_default: gpio-hall-sensor-state { > + pins = "gpio44"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + ts_int_default: ts-int-default-state { > + pins = "gpio65"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > +}; > + > +&uart_0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart_console_active>; > + > + status = "okay"; > +}; > + > +&usb3 { > + status = "okay"; > +}; > + > +&usb3_dwc3 { > + dr_mode = "peripheral"; > +};