Re: [PATCH 1/4] dt-bindings: display: bridge: tfp410: Add tfp410 i2c example

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 25/01/2023 22:09, Jonathan Cormier wrote:
> Add a i2c example with HDMI connector

Why? It's the same - but more on this below.

> 
> Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>

You need to test the bindings before sending and fix the errors.

> ---
>  .../bindings/display/bridge/ti,tfp410.yaml         | 42 ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
> index 4c5dd8ec2951..456214f14b47 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
> @@ -116,4 +116,46 @@ examples:
>          };
>      };
>  
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      hdmi_encoder: tfp410@38 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +        compatible = "ti,tfp410";
> +        reg = <0x38>;
> +
> +        ports {
> +          address-cells = <1>;
> +          size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +            tfp410_in: endpoint {
> +              remote-endpoint = <&dpi1_out>;
> +            };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +            tfp410_out: endpoint {
> +              remote-endpoint = <&hdmi_connector_in>;
> +            };

That's the same example as existing one, so it looks useless. I don't
see benefits of this example.

> +          };
> +        };
> +      };
> +    };
> +
> +    hdmi: hdmi_connector {

Drop. Incorrect name and not really related.

> +      compatible = "hdmi-connector";
> +      label = "hdmi";
> +      type = "a";
> +      ddc-i2c-bus = <&i2c1>;
> +      port {
> +        hdmi_connector_in: endpoint {
> +          remote-endpoint = <&tfp410_out>;
> +        };
> +      };
> +    };
> +
>  ...
> 

Best regards,
Krzysztof