Re: [PATCH v2 3/4] firmware: psci: Read and use vendor reset types

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 4/14/24 21:30, Elliot Berman wrote:
> SoC vendors have different types of resets and are controlled through
> various registers. For instance, Qualcomm chipsets can reboot to a
> "download mode" that allows a RAM dump to be collected. Another example
> is they also support writing a cookie that can be read by bootloader
> during next boot. PSCI offers a mechanism, SYSTEM_RESET2, for these
> vendor reset types to be implemented without requiring drivers for every
> register/cookie.
> 
> Add support in PSCI to statically map reboot mode commands from
> userspace to a vendor reset and cookie value using the device tree.
> 
> Reboot mode framework is close but doesn't quite fit with the
> design and requirements for PSCI SYSTEM_RESET2. Some of these issues can
> be solved but doesn't seem reasonable in sum:
>   1. reboot mode registers against the reboot_notifier_list, which is too
>      early to call SYSTEM_RESET2. PSCI would need to remember the reset
>      type from the reboot-mode framework callback and use it
>      psci_sys_reset.
>   2. reboot mode assumes only one cookie/parameter is described in the
>      device tree. SYSTEM_RESET2 uses 2: one for the type and one for
>      cookie.
>   3. psci cpuidle driver already registers a driver against the
>      arm,psci-1.0 compatible. Refactoring would be needed to have both a
>      cpuidle and reboot-mode driver.
> 
> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
> ---

[...]

> +arch_initcall(psci_init_system_reset2_modes);

Perhaps this could be called from \/

Konrad

> +
>   int __init psci_dt_init(void)
>   {
>   	struct device_node *np;
>