* [PATCH v5 03/23] drivers/fsi: Add empty master scan
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 07/23] drivers/fsi: Implement slave initialisation Christopher Bostic
` (11 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Jeremy Kerr, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Chris Bostic
From: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
When a new fsi master is added, we will need to scan its links, and
slaves attached to those links. This change introduces a little shell to
iterate the links, which we will populate with the actual slave scan in
a later change.
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
drivers/fsi/fsi-core.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 2f19509..e90d45d 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -32,7 +32,25 @@ struct fsi_slave {
#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
+/* FSI slave support */
+static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
+{
+ /* todo: initialise slave device, perform engine scan */
+
+ return -ENODEV;
+}
+
/* FSI master support */
+static int fsi_master_scan(struct fsi_master *master)
+{
+ int link;
+
+ for (link = 0; link < master->n_links; link++)
+ fsi_slave_init(master, link, 0);
+
+ return 0;
+}
+
int fsi_master_register(struct fsi_master *master)
{
int rc;
@@ -44,10 +62,13 @@ int fsi_master_register(struct fsi_master *master)
dev_set_name(&master->dev, "fsi%d", master->idx);
rc = device_register(&master->dev);
- if (rc)
+ if (rc) {
ida_simple_remove(&master_ida, master->idx);
+ return rc;
+ }
- return rc;
+ fsi_master_scan(master);
+ return 0;
}
EXPORT_SYMBOL_GPL(fsi_master_register);
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 07/23] drivers/fsi: Implement slave initialisation
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2017-04-05 2:05 ` [PATCH v5 03/23] drivers/fsi: Add empty master scan Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 08/23] drivers/fsi: Set slave SMODE to init communication Christopher Bostic
` (10 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Jeremy Kerr, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Chris Bostic
From: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Implement fsi_slave_init: if we can read a chip ID, create fsi_slave
devices and register with the driver core.
Includes changes from Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>.
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
drivers/fsi/fsi-core.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 64 insertions(+), 2 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 6e1cfdf..c705ca2 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -17,9 +17,12 @@
#include <linux/fsi.h>
#include <linux/idr.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "fsi-master.h"
+#define FSI_SLAVE_SIZE_23b 0x800000
+
static DEFINE_IDA(master_ida);
struct fsi_slave {
@@ -114,11 +117,70 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
+static void fsi_slave_release(struct device *dev)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+
+ kfree(slave);
+}
+
static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
{
- /* todo: initialise slave device, perform engine scan */
+ struct fsi_slave *slave;
+ uint32_t chip_id;
+ uint8_t crc;
+ int rc;
+
+ /* Currently, we only support single slaves on a link, and use the
+ * full 23-bit address range
+ */
+ if (id != 0)
+ return -EINVAL;
+
+ rc = fsi_master_read(master, link, id, 0, &chip_id, sizeof(chip_id));
+ if (rc) {
+ dev_warn(&master->dev, "can't read slave %02x:%02x %d\n",
+ link, id, rc);
+ return -ENODEV;
+ }
+ chip_id = be32_to_cpu(chip_id);
+
+ crc = fsi_crc4(0, chip_id, 32);
+ if (crc) {
+ dev_warn(&master->dev, "slave %02x:%02x invalid chip id CRC!\n",
+ link, id);
+ return -EIO;
+ }
+
+ dev_info(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n",
+ chip_id, master->idx, link, id);
+
+ /* We can communicate with a slave; create the slave device and
+ * register.
+ */
+ slave = kzalloc(sizeof(*slave), GFP_KERNEL);
+ if (!slave)
+ return -ENOMEM;
+
+ slave->master = master;
+ slave->dev.parent = &master->dev;
+ slave->dev.release = fsi_slave_release;
+ slave->link = link;
+ slave->id = id;
+ slave->size = FSI_SLAVE_SIZE_23b;
+
+ dev_set_name(&slave->dev, "slave@%02x:%02x", link, id);
+ rc = device_register(&slave->dev);
+ if (rc < 0) {
+ dev_warn(&master->dev, "failed to create slave device: %d\n",
+ rc);
+ put_device(&slave->dev);
+ return rc;
+ }
+
+ /* todo: perform engine scan */
- return -ENODEV;
+ return rc;
}
/* FSI master support */
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 08/23] drivers/fsi: Set slave SMODE to init communication
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2017-04-05 2:05 ` [PATCH v5 03/23] drivers/fsi: Add empty master scan Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 07/23] drivers/fsi: Implement slave initialisation Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 09/23] drivers/fsi: scan slaves & register devices Christopher Bostic
` (9 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Chris Bostic, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Jeremy Kerr
From: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Set CFAM to appropriate ID so that the controlling master can manage
link memory ranges. Add slave engine register definitions.
Includes changes from Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>.
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
drivers/fsi/fsi-core.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index c705ca2..b7b138b 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -21,6 +21,27 @@
#include "fsi-master.h"
+#define FSI_SLAVE_BASE 0x800
+
+/*
+ * FSI slave engine control register offsets
+ */
+#define FSI_SMODE 0x0 /* R/W: Mode register */
+
+/*
+ * SMODE fields
+ */
+#define FSI_SMODE_WSC 0x80000000 /* Warm start done */
+#define FSI_SMODE_ECRC 0x20000000 /* Hw CRC check */
+#define FSI_SMODE_SID_SHIFT 24 /* ID shift */
+#define FSI_SMODE_SID_MASK 3 /* ID Mask */
+#define FSI_SMODE_ED_SHIFT 20 /* Echo delay shift */
+#define FSI_SMODE_ED_MASK 0xf /* Echo delay mask */
+#define FSI_SMODE_SD_SHIFT 16 /* Send delay shift */
+#define FSI_SMODE_SD_MASK 0xf /* Send delay mask */
+#define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */
+#define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */
+
#define FSI_SLAVE_SIZE_23b 0x800000
static DEFINE_IDA(master_ida);
@@ -117,6 +138,52 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
+/* Encode slave local bus echo delay */
+static inline uint32_t fsi_smode_echodly(int x)
+{
+ return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT;
+}
+
+/* Encode slave local bus send delay */
+static inline uint32_t fsi_smode_senddly(int x)
+{
+ return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT;
+}
+
+/* Encode slave local bus clock rate ratio */
+static inline uint32_t fsi_smode_lbcrr(int x)
+{
+ return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT;
+}
+
+/* Encode slave ID */
+static inline uint32_t fsi_smode_sid(int x)
+{
+ return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT;
+}
+
+static const uint32_t fsi_slave_smode(int id)
+{
+ return FSI_SMODE_WSC | FSI_SMODE_ECRC
+ | fsi_smode_sid(id)
+ | fsi_smode_echodly(0xf) | fsi_smode_senddly(0xf)
+ | fsi_smode_lbcrr(0x8);
+}
+
+static int fsi_slave_set_smode(struct fsi_master *master, int link, int id)
+{
+ uint32_t smode;
+
+ /* set our smode register with the slave ID field to 0; this enables
+ * extended slave addressing
+ */
+ smode = fsi_slave_smode(id);
+ smode = cpu_to_be32(smode);
+
+ return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SMODE,
+ &smode, sizeof(smode));
+}
+
static void fsi_slave_release(struct device *dev)
{
struct fsi_slave *slave = to_fsi_slave(dev);
@@ -155,6 +222,14 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
dev_info(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n",
chip_id, master->idx, link, id);
+ rc = fsi_slave_set_smode(master, link, id);
+ if (rc) {
+ dev_warn(&master->dev,
+ "can't set smode on slave:%02x:%02x %d\n",
+ link, id, rc);
+ return -ENODEV;
+ }
+
/* We can communicate with a slave; create the slave device and
* register.
*/
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 09/23] drivers/fsi: scan slaves & register devices
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (2 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 08/23] drivers/fsi: Set slave SMODE to init communication Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 10/23] drivers/fsi: Add device read/write/peek API Christopher Bostic
` (8 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Jeremy Kerr, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Chris Bostic
From: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Now that we have fsi_slave devices, scan each for endpoints, and
register them on the fsi bus.
Includes contributions from Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
drivers/fsi/fsi-core.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++--
include/linux/fsi.h | 4 ++
2 files changed, 128 insertions(+), 3 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index b7b138b..a8faa89 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -21,6 +21,19 @@
#include "fsi-master.h"
+#define FSI_SLAVE_CONF_NEXT_MASK 0x80000000
+#define FSI_SLAVE_CONF_SLOTS_MASK 0x00ff0000
+#define FSI_SLAVE_CONF_SLOTS_SHIFT 16
+#define FSI_SLAVE_CONF_VERSION_MASK 0x0000f000
+#define FSI_SLAVE_CONF_VERSION_SHIFT 12
+#define FSI_SLAVE_CONF_TYPE_MASK 0x00000ff0
+#define FSI_SLAVE_CONF_TYPE_SHIFT 4
+#define FSI_SLAVE_CONF_CRC_SHIFT 4
+#define FSI_SLAVE_CONF_CRC_MASK 0x0000000f
+#define FSI_SLAVE_CONF_DATA_BITS 28
+
+static const int engine_page_size = 0x400;
+
#define FSI_SLAVE_BASE 0x800
/*
@@ -61,6 +74,30 @@ static int fsi_master_read(struct fsi_master *master, int link,
static int fsi_master_write(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, const void *val, size_t size);
+/* FSI endpoint-device support */
+
+static void fsi_device_release(struct device *_device)
+{
+ struct fsi_device *device = to_fsi_dev(_device);
+
+ kfree(device);
+}
+
+static struct fsi_device *fsi_create_device(struct fsi_slave *slave)
+{
+ struct fsi_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ dev->dev.parent = &slave->dev;
+ dev->dev.bus = &fsi_bus_type;
+ dev->dev.release = fsi_device_release;
+
+ return dev;
+}
+
/* crc helpers */
static const uint8_t crc4_tab[] = {
0x0, 0x7, 0xe, 0x9, 0xb, 0xc, 0x5, 0x2,
@@ -138,6 +175,91 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
+static int fsi_slave_scan(struct fsi_slave *slave)
+{
+ uint32_t engine_addr;
+ uint32_t conf;
+ int rc, i;
+
+ /*
+ * scan engines
+ *
+ * We keep the peek mode and slave engines for the core; so start
+ * at the third slot in the configuration table. We also need to
+ * skip the chip ID entry at the start of the address space.
+ */
+ engine_addr = engine_page_size * 3;
+ for (i = 2; i < engine_page_size / sizeof(uint32_t); i++) {
+ uint8_t slots, version, type, crc;
+ struct fsi_device *dev;
+
+ rc = fsi_slave_read(slave, (i + 1) * sizeof(conf),
+ &conf, sizeof(conf));
+ if (rc) {
+ dev_warn(&slave->dev,
+ "error reading slave registers\n");
+ return -1;
+ }
+ conf = be32_to_cpu(conf);
+
+ crc = fsi_crc4(0, conf, 32);
+ if (crc) {
+ dev_warn(&slave->dev,
+ "crc error in slave register at 0x%04x\n",
+ i);
+ return -1;
+ }
+
+ slots = (conf & FSI_SLAVE_CONF_SLOTS_MASK)
+ >> FSI_SLAVE_CONF_SLOTS_SHIFT;
+ version = (conf & FSI_SLAVE_CONF_VERSION_MASK)
+ >> FSI_SLAVE_CONF_VERSION_SHIFT;
+ type = (conf & FSI_SLAVE_CONF_TYPE_MASK)
+ >> FSI_SLAVE_CONF_TYPE_SHIFT;
+
+ /*
+ * Unused address areas are marked by a zero type value; this
+ * skips the defined address areas
+ */
+ if (type != 0 && slots != 0) {
+
+ /* create device */
+ dev = fsi_create_device(slave);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->slave = slave;
+ dev->engine_type = type;
+ dev->version = version;
+ dev->unit = i;
+ dev->addr = engine_addr;
+ dev->size = slots * engine_page_size;
+
+ dev_info(&slave->dev,
+ "engine[%i]: type %x, version %x, addr %x size %x\n",
+ dev->unit, dev->engine_type, version,
+ dev->addr, dev->size);
+
+ dev_set_name(&dev->dev, "%02x:%02x:%02x:%02x",
+ slave->master->idx, slave->link,
+ slave->id, i - 2);
+
+ rc = device_register(&dev->dev);
+ if (rc) {
+ dev_warn(&slave->dev, "add failed: %d\n", rc);
+ put_device(&dev->dev);
+ }
+ }
+
+ engine_addr += slots * engine_page_size;
+
+ if (!(conf & FSI_SLAVE_CONF_NEXT_MASK))
+ break;
+ }
+
+ return 0;
+}
+
/* Encode slave local bus echo delay */
static inline uint32_t fsi_smode_echodly(int x)
{
@@ -253,9 +375,8 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
return rc;
}
- /* todo: perform engine scan */
-
- return rc;
+ fsi_slave_scan(slave);
+ return 0;
}
/* FSI master support */
diff --git a/include/linux/fsi.h b/include/linux/fsi.h
index 273cbf6..efa55ba 100644
--- a/include/linux/fsi.h
+++ b/include/linux/fsi.h
@@ -21,6 +21,10 @@ struct fsi_device {
struct device dev;
u8 engine_type;
u8 version;
+ u8 unit;
+ struct fsi_slave *slave;
+ uint32_t addr;
+ uint32_t size;
};
struct fsi_device_id {
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 10/23] drivers/fsi: Add device read/write/peek API
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (3 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 09/23] drivers/fsi: scan slaves & register devices Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 11/23] drivers/fsi: Add master unscan Christopher Bostic
` (7 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Jeremy Kerr, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Edward A . James,
Chris Bostic
From: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
This change introduces the fsi device API: simple read, write and peek
accessors for the devices' address spaces.
Includes contributions from Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
and Edward A. James <eajames-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>.
Signed-off-by: Edward A. James <eajames-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
drivers/fsi/fsi-core.c | 33 +++++++++++++++++++++++++++++++++
include/linux/fsi.h | 7 ++++++-
2 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index a8faa89..4da0b030 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -32,6 +32,8 @@
#define FSI_SLAVE_CONF_CRC_MASK 0x0000000f
#define FSI_SLAVE_CONF_DATA_BITS 28
+#define FSI_PEEK_BASE 0x410
+
static const int engine_page_size = 0x400;
#define FSI_SLAVE_BASE 0x800
@@ -73,9 +75,40 @@ static int fsi_master_read(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, void *val, size_t size);
static int fsi_master_write(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, const void *val, size_t size);
+static int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
+ void *val, size_t size);
+static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
+ const void *val, size_t size);
/* FSI endpoint-device support */
+int fsi_device_read(struct fsi_device *dev, uint32_t addr, void *val,
+ size_t size)
+{
+ if (addr > dev->size || size > dev->size || addr > dev->size - size)
+ return -EINVAL;
+
+ return fsi_slave_read(dev->slave, dev->addr + addr, val, size);
+}
+EXPORT_SYMBOL_GPL(fsi_device_read);
+
+int fsi_device_write(struct fsi_device *dev, uint32_t addr, const void *val,
+ size_t size)
+{
+ if (addr > dev->size || size > dev->size || addr > dev->size - size)
+ return -EINVAL;
+
+ return fsi_slave_write(dev->slave, dev->addr + addr, val, size);
+}
+EXPORT_SYMBOL_GPL(fsi_device_write);
+
+int fsi_device_peek(struct fsi_device *dev, void *val)
+{
+ uint32_t addr = FSI_PEEK_BASE + ((dev->unit - 2) * sizeof(uint32_t));
+
+ return fsi_slave_read(dev->slave, addr, val, sizeof(uint32_t));
+}
+
static void fsi_device_release(struct device *_device)
{
struct fsi_device *device = to_fsi_dev(_device);
diff --git a/include/linux/fsi.h b/include/linux/fsi.h
index efa55ba..66bce48 100644
--- a/include/linux/fsi.h
+++ b/include/linux/fsi.h
@@ -27,6 +27,12 @@ struct fsi_device {
uint32_t size;
};
+extern int fsi_device_read(struct fsi_device *dev, uint32_t addr,
+ void *val, size_t size);
+extern int fsi_device_write(struct fsi_device *dev, uint32_t addr,
+ const void *val, size_t size);
+extern int fsi_device_peek(struct fsi_device *dev, void *val);
+
struct fsi_device_id {
u8 engine_type;
u8 version;
@@ -40,7 +46,6 @@ struct fsi_device_id {
#define FSI_DEVICE_VERSIONED(t, v) \
.engine_type = (t), .version = (v),
-
struct fsi_driver {
struct device_driver drv;
const struct fsi_device_id *id_table;
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 11/23] drivers/fsi: Add master unscan
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (4 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 10/23] drivers/fsi: Add device read/write/peek API Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 12/23] drivers/fsi: Add documentation for GPIO bindings Christopher Bostic
` (6 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Chris Bostic, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r
From: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Allow a master to undo a previous scan. Should a master scan a bus
twice it will need to ensure it doesn't double register any
previously detected device.
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
drivers/fsi/fsi-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 4da0b030..75d2a88 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -69,6 +69,7 @@ struct fsi_slave {
uint32_t size; /* size of slave address space */
};
+#define to_fsi_master(d) container_of(d, struct fsi_master, dev)
#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
static int fsi_master_read(struct fsi_master *master, int link,
@@ -491,6 +492,37 @@ static int fsi_master_scan(struct fsi_master *master)
return 0;
}
+static int __fsi_slave_remove_device(struct device *dev, void *arg)
+{
+ device_unregister(dev);
+ return 0;
+}
+
+static int __fsi_master_remove_slave(struct device *dev, void *arg)
+{
+ device_for_each_child(dev, NULL, __fsi_slave_remove_device);
+ device_unregister(dev);
+ return 0;
+}
+
+static void fsi_master_unscan(struct fsi_master *master)
+{
+ device_for_each_child(&master->dev, NULL, __fsi_master_remove_slave);
+}
+
+static ssize_t master_rescan_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_master *master = to_fsi_master(dev);
+
+ fsi_master_unscan(master);
+ fsi_master_scan(master);
+
+ return count;
+}
+
+static DEVICE_ATTR(rescan, 0200, NULL, master_rescan_store);
+
int fsi_master_register(struct fsi_master *master)
{
int rc;
@@ -507,7 +539,15 @@ int fsi_master_register(struct fsi_master *master)
return rc;
}
+ rc = device_create_file(&master->dev, &dev_attr_rescan);
+ if (rc) {
+ device_unregister(&master->dev);
+ ida_simple_remove(&master_ida, master->idx);
+ return rc;
+ }
+
fsi_master_scan(master);
+
return 0;
}
EXPORT_SYMBOL_GPL(fsi_master_register);
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 12/23] drivers/fsi: Add documentation for GPIO bindings
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (5 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 11/23] drivers/fsi: Add master unscan Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 13/23] drivers/fsi: Add client driver register utilities Christopher Bostic
` (5 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Chris Bostic, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r
From: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Add fsi master gpio device tree binding documentation
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/fsi/fsi-master-gpio.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
new file mode 100644
index 0000000..a767259
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
@@ -0,0 +1,24 @@
+Device-tree bindings for gpio-based FSI master driver
+-----------------------------------------------------
+
+Required properties:
+ - compatible = "fsi-master-gpio";
+ - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock
+ - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal
+
+Optional properties:
+ - enable-gpios = <gpio-descriptor>; : GPIO for enable signal
+ - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable
+ - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other
+ functions (eg, external FSI masters)
+
+Examples:
+
+ fsi-master {
+ compatible = "fsi-master-gpio", "fsi-master";
+ clock-gpios = <&gpio 0>;
+ data-gpios = <&gpio 1>;
+ enable-gpios = <&gpio 2>;
+ trans-gpios = <&gpio 3>;
+ mux-gpios = <&gpio 4>;
+ }
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 13/23] drivers/fsi: Add client driver register utilities
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (6 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 12/23] drivers/fsi: Add documentation for GPIO bindings Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 17/23] drivers/fsi: Add error handling for slave communication errors Christopher Bostic
` (4 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Chris Bostic, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r
From: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Add driver_register and driver_unregister wrappers for FSI.
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
drivers/fsi/fsi-core.c | 17 +++++++++++++++++
include/linux/fsi.h | 12 ++++++++++++
2 files changed, 29 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 75d2a88..4359e26 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -585,6 +585,23 @@ static int fsi_bus_match(struct device *dev, struct device_driver *drv)
return 0;
}
+int fsi_driver_register(struct fsi_driver *fsi_drv)
+{
+ if (!fsi_drv)
+ return -EINVAL;
+ if (!fsi_drv->id_table)
+ return -EINVAL;
+
+ return driver_register(&fsi_drv->drv);
+}
+EXPORT_SYMBOL_GPL(fsi_driver_register);
+
+void fsi_driver_unregister(struct fsi_driver *fsi_drv)
+{
+ driver_unregister(&fsi_drv->drv);
+}
+EXPORT_SYMBOL_GPL(fsi_driver_unregister);
+
struct bus_type fsi_bus_type = {
.name = "fsi",
.match = fsi_bus_match,
diff --git a/include/linux/fsi.h b/include/linux/fsi.h
index 66bce48..34f1e9a 100644
--- a/include/linux/fsi.h
+++ b/include/linux/fsi.h
@@ -54,6 +54,18 @@ struct fsi_driver {
#define to_fsi_dev(devp) container_of(devp, struct fsi_device, dev)
#define to_fsi_drv(drvp) container_of(drvp, struct fsi_driver, drv)
+extern int fsi_driver_register(struct fsi_driver *fsi_drv);
+extern void fsi_driver_unregister(struct fsi_driver *fsi_drv);
+
+/* module_fsi_driver() - Helper macro for drivers that don't do
+ * anything special in module init/exit. This eliminates a lot of
+ * boilerplate. Each module may only use this macro once, and
+ * calling it replaces module_init() and module_exit()
+ */
+#define module_fsi_driver(__fsi_driver) \
+ module_driver(__fsi_driver, fsi_driver_register, \
+ fsi_driver_unregister)
+
extern struct bus_type fsi_bus_type;
#endif /* LINUX_FSI_H */
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 17/23] drivers/fsi: Add error handling for slave communication errors
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (7 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 13/23] drivers/fsi: Add client driver register utilities Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 20/23] drivers/fsi/gpio: Add tracepoints for GPIO master Christopher Bostic
` (3 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Jeremy Kerr, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Chris Bostic
From: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
This change implements error handling in the FSI core, by cleaning up
and retrying failed operations, using the SISC, TERM and BREAK
facilities.
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
---
drivers/fsi/fsi-core.c | 121 ++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 114 insertions(+), 7 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 09becec..747d0e3 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -44,7 +44,9 @@
/*
* FSI slave engine control register offsets
*/
-#define FSI_SMODE 0x0 /* R/W: Mode register */
+#define FSI_SMODE 0x0 /* R/W: Mode register */
+#define FSI_SISC 0x8 /* R/W: Interrupt condition */
+#define FSI_SSTAT 0x14 /* R : Slave status */
/*
* SMODE fields
@@ -75,10 +77,14 @@ struct fsi_slave {
#define to_fsi_master(d) container_of(d, struct fsi_master, dev)
#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
+static const int slave_retries = 2;
+static int discard_errors;
+
static int fsi_master_read(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, void *val, size_t size);
static int fsi_master_write(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, const void *val, size_t size);
+static int fsi_master_break(struct fsi_master *master, int link);
/* FSI endpoint-device support */
@@ -180,32 +186,131 @@ static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
return 0;
}
+int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
+{
+ struct fsi_master *master = slave->master;
+ uint32_t irq, stat;
+ int rc, link;
+ uint8_t id;
+
+ link = slave->link;
+ id = slave->id;
+
+ rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SISC,
+ &irq, sizeof(irq));
+ if (rc)
+ return rc;
+
+ rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SSTAT,
+ &stat, sizeof(stat));
+ if (rc)
+ return rc;
+
+ dev_info(&slave->dev, "status: 0x%08x, sisc: 0x%08x\n",
+ be32_to_cpu(stat), be32_to_cpu(irq));
+
+ /* clear interrupts */
+ return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SISC,
+ &irq, sizeof(irq));
+}
+
+static int fsi_slave_set_smode(struct fsi_master *master, int link, int id);
+
+int fsi_slave_handle_error(struct fsi_slave *slave, bool write, uint32_t addr,
+ size_t size)
+{
+ struct fsi_master *master = slave->master;
+ int rc, link;
+ uint32_t reg;
+ uint8_t id;
+
+ if (discard_errors)
+ return -1;
+
+ link = slave->link;
+ id = slave->id;
+
+ dev_dbg(&slave->dev, "handling error on %s to 0x%08x[%zd]",
+ write ? "write" : "read", addr, size);
+
+ /* try a simple clear of error conditions, which may fail if we've lost
+ * communication with the slave
+ */
+ rc = fsi_slave_report_and_clear_errors(slave);
+ if (!rc)
+ return 0;
+
+ /* send a TERM and retry */
+ if (master->term) {
+ rc = master->term(master, link, id);
+ if (!rc) {
+ rc = fsi_master_read(master, link, id, 0,
+ ®, sizeof(reg));
+ if (!rc)
+ rc = fsi_slave_report_and_clear_errors(slave);
+ if (!rc)
+ return 0;
+ }
+ }
+
+ /* getting serious, reset the slave via BREAK */
+ rc = fsi_master_break(master, link);
+ if (rc)
+ return rc;
+
+ rc = fsi_slave_set_smode(master, link, id);
+ if (rc)
+ return rc;
+
+ return fsi_slave_report_and_clear_errors(slave);
+}
+
int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
void *val, size_t size)
{
uint8_t id = slave->id;
- int rc;
+ int rc, err_rc, i;
rc = fsi_slave_calc_addr(slave, &addr, &id);
if (rc)
return rc;
- return fsi_master_read(slave->master, slave->link, id,
- addr, val, size);
+ for (i = 0; i < slave_retries; i++) {
+ rc = fsi_master_read(slave->master, slave->link,
+ id, addr, val, size);
+ if (!rc)
+ break;
+
+ err_rc = fsi_slave_handle_error(slave, false, addr, size);
+ if (err_rc)
+ break;
+ }
+
+ return rc;
}
int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
const void *val, size_t size)
{
uint8_t id = slave->id;
- int rc;
+ int rc, err_rc, i;
rc = fsi_slave_calc_addr(slave, &addr, &id);
if (rc)
return rc;
- return fsi_master_write(slave->master, slave->link, id,
- addr, val, size);
+ for (i = 0; i < slave_retries; i++) {
+ rc = fsi_master_write(slave->master, slave->link,
+ id, addr, val, size);
+ if (!rc)
+ break;
+
+ err_rc = fsi_slave_handle_error(slave, true, addr, size);
+ if (err_rc)
+ break;
+ }
+
+ return rc;
}
extern int fsi_slave_claim_range(struct fsi_slave *slave,
@@ -765,3 +870,5 @@ static void fsi_exit(void)
module_init(fsi_init);
module_exit(fsi_exit);
+module_param(discard_errors, int, 0664);
+MODULE_PARM_DESC(discard_errors, "Don't invoke error handling on bus accesses");
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 20/23] drivers/fsi/gpio: Add tracepoints for GPIO master
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (8 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 17/23] drivers/fsi: Add error handling for slave communication errors Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver Christopher Bostic
` (2 subsequent siblings)
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Jeremy Kerr, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Chris Bostic
From: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Add trace points for key GPIO operations of the GPIO based FSI
master.
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
---
drivers/fsi/fsi-master-gpio.c | 9 +++++
include/trace/events/fsi_master_gpio.h | 68 ++++++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 include/trace/events/fsi_master_gpio.h
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index 9fedfaf..5d9e0b0 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -61,6 +61,9 @@ struct fsi_master_gpio {
struct gpio_desc *gpio_mux; /* Mux control */
};
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_gpio.h>
+
#define to_fsi_master_gpio(m) container_of(m, struct fsi_master_gpio, master)
struct fsi_gpio_msg {
@@ -128,6 +131,8 @@ static void serial_in(struct fsi_master_gpio *master, struct fsi_gpio_msg *msg,
msg->msg |= ~in_bit & 0x1; /* Data is negative active */
}
msg->bits += num_bits;
+
+ trace_fsi_master_gpio_in(master, num_bits, msg->msg);
}
static void serial_out(struct fsi_master_gpio *master,
@@ -139,6 +144,8 @@ static void serial_out(struct fsi_master_gpio *master,
uint64_t last_bit = ~0;
int next_bit;
+ trace_fsi_master_gpio_out(master, cmd->bits, cmd->msg);
+
if (!cmd->bits) {
dev_warn(master->dev, "trying to output 0 bits\n");
return;
@@ -464,6 +471,8 @@ static int fsi_master_gpio_break(struct fsi_master *_master, int link)
if (link != 0)
return -ENODEV;
+ trace_fsi_master_gpio_break(master);
+
set_sda_output(master, 1);
sda_out(master, 1);
clock_toggle(master, FSI_PRE_BREAK_CLOCKS);
diff --git a/include/trace/events/fsi_master_gpio.h b/include/trace/events/fsi_master_gpio.h
new file mode 100644
index 0000000..11b36c1
--- /dev/null
+++ b/include/trace/events/fsi_master_gpio.h
@@ -0,0 +1,68 @@
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM fsi_master_gpio
+
+#if !defined(_TRACE_FSI_MASTER_GPIO_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_FSI_MASTER_GPIO_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(fsi_master_gpio_in,
+ TP_PROTO(const struct fsi_master_gpio *master, int bits, uint64_t msg),
+ TP_ARGS(master, bits, msg),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, bits)
+ __field(uint64_t, msg)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ __entry->bits = bits;
+ __entry->msg = msg & ((1ull<<bits) - 1);
+ ),
+ TP_printk("fsi-gpio%d => %0*llx[%d]",
+ __entry->master_idx,
+ (__entry->bits + 3) / 4,
+ __entry->msg,
+ __entry->bits
+ )
+);
+
+TRACE_EVENT(fsi_master_gpio_out,
+ TP_PROTO(const struct fsi_master_gpio *master, int bits, uint64_t msg),
+ TP_ARGS(master, bits, msg),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, bits)
+ __field(uint64_t, msg)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ __entry->bits = bits;
+ __entry->msg = msg & ((1ull<<bits) - 1);
+ ),
+ TP_printk("fsi-gpio%d <= %0*llx[%d]",
+ __entry->master_idx,
+ (__entry->bits + 3) / 4,
+ __entry->msg,
+ __entry->bits
+ )
+);
+
+TRACE_EVENT(fsi_master_gpio_break,
+ TP_PROTO(const struct fsi_master_gpio *master),
+ TP_ARGS(master),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ ),
+ TP_printk("fsi-gpio%d ----break---",
+ __entry->master_idx
+ )
+);
+
+#endif /* _TRACE_FSI_MASTER_GPIO_H */
+
+#include <trace/define_trace.h>
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (9 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 20/23] drivers/fsi/gpio: Add tracepoints for GPIO master Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 16:35 ` Randy Dunlap
2017-04-05 2:06 ` [PATCH v5 22/23] drivers/fsi: Add hub master support Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 23/23] drivers/fsi: Use asynchronous slave mode Christopher Bostic
12 siblings, 1 reply; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Chris Bostic, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Edward A . James,
Jeremy Kerr
From: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Create a simple SCOM engine device driver that reads and writes
its control registers via an FSI bus.
Includes changes from Edward A. James <eajames-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>.
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Signed-off-by: Edward A. James <eajames-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
---
drivers/fsi/Kconfig | 6 ++
drivers/fsi/Makefile | 1 +
drivers/fsi/fsi-scom.c | 263 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 270 insertions(+)
create mode 100644 drivers/fsi/fsi-scom.c
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index 9cf8345..0fa265c 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -18,6 +18,12 @@ config FSI_MASTER_GPIO
---help---
This option enables a FSI master driver using GPIO lines.
+config FSI_SCOM
+ tristate "SCOM FSI client device driver"
+ depends on FSI
+ ---help---
+ This option enables an FSI based SCOM device driver.
+
endif
endmenu
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index ed28ac0..3466f08 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_FSI) += fsi-core.o
obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
+obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
new file mode 100644
index 0000000..98d062f
--- /dev/null
+++ b/drivers/fsi/fsi-scom.c
@@ -0,0 +1,263 @@
+/*
+ * SCOM FSI Client device driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERGCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/cdev.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/miscdevice.h>
+#include <linux/list.h>
+#include <linux/idr.h>
+
+#define FSI_ENGID_SCOM 0x5
+
+#define SCOM_FSI2PIB_DELAY 50
+
+/* SCOM engine register set */
+#define SCOM_DATA0_REG 0x00
+#define SCOM_DATA1_REG 0x04
+#define SCOM_CMD_REG 0x08
+#define SCOM_RESET_REG 0x1C
+
+#define SCOM_RESET_CMD 0x80000000
+#define SCOM_WRITE_CMD 0x80000000
+
+struct scom_device {
+ struct list_head link;
+ struct fsi_device *fsi_dev;
+ struct miscdevice mdev;
+ char name[32];
+ int idx;
+};
+
+#define to_scom_dev(x) container_of((x), struct scom_device, mdev)
+
+static struct list_head scom_devices;
+
+static DEFINE_IDA(scom_ida);
+
+static int put_scom(struct scom_device *scom_dev, uint64_t value,
+ uint32_t addr)
+{
+ int rc;
+ uint32_t data;
+
+ data = cpu_to_be32(SCOM_RESET_CMD);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_RESET_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = cpu_to_be32((value >> 32) & 0xffffffff);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = cpu_to_be32(value & 0xffffffff);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = cpu_to_be32(SCOM_WRITE_CMD | addr);
+ return fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+}
+
+static int get_scom(struct scom_device *scom_dev, uint64_t *value,
+ uint32_t addr)
+{
+ uint32_t result, data;
+ int rc;
+
+ *value = 0ULL;
+ data = cpu_to_be32(addr);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &result,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ *value |= (uint64_t)cpu_to_be32(result) << 32;
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &result,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ *value |= cpu_to_be32(result);
+
+ return 0;
+}
+
+static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
+ loff_t *offset)
+{
+ int rc;
+ struct miscdevice *mdev =
+ (struct miscdevice *)filep->private_data;
+ struct scom_device *scom = to_scom_dev(mdev);
+ struct device *dev = &scom->fsi_dev->dev;
+ uint64_t val;
+
+ if (len != sizeof(uint64_t))
+ return -EINVAL;
+
+ rc = get_scom(scom, &val, *offset);
+ if (rc) {
+ dev_dbg(dev, "get_scom fail:%d\n", rc);
+ return rc;
+ }
+
+ rc = copy_to_user(buf, &val, len);
+ if (rc)
+ dev_dbg(dev, "copy to user failed:%d\n", rc);
+
+ return rc ? rc : len;
+}
+
+static ssize_t scom_write(struct file *filep, const char __user *buf,
+ size_t len, loff_t *offset)
+{
+ int rc;
+ struct miscdevice *mdev = filep->private_data;
+ struct scom_device *scom = to_scom_dev(mdev);
+ struct device *dev = &scom->fsi_dev->dev;
+ uint64_t val;
+
+ if (len != sizeof(uint64_t))
+ return -EINVAL;
+
+ rc = copy_from_user(&val, buf, len);
+ if (rc) {
+ dev_dbg(dev, "copy from user failed:%d\n", rc);
+ return -EINVAL;
+ }
+
+ rc = put_scom(scom, val, *offset);
+ if (rc) {
+ dev_dbg(dev, "put_scom failed with:%d\n", rc);
+ return rc;
+ }
+
+ return len;
+}
+
+static loff_t scom_llseek(struct file *file, loff_t offset, int whence)
+{
+ switch (whence) {
+ case SEEK_CUR:
+ break;
+ case SEEK_SET:
+ file->f_pos = offset;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return offset;
+}
+
+static const struct file_operations scom_fops = {
+ .owner = THIS_MODULE,
+ .llseek = scom_llseek,
+ .read = scom_read,
+ .write = scom_write,
+};
+
+static int scom_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct scom_device *scom;
+
+ scom = devm_kzalloc(dev, sizeof(*scom), GFP_KERNEL);
+ if (!scom)
+ return -ENOMEM;
+
+ scom->idx = ida_simple_get(&scom_ida, 1, INT_MAX, GFP_KERNEL);
+ snprintf(scom->name, sizeof(scom->name), "scom%d", scom->idx);
+ scom->fsi_dev = fsi_dev;
+ scom->mdev.minor = MISC_DYNAMIC_MINOR;
+ scom->mdev.fops = &scom_fops;
+ scom->mdev.name = scom->name;
+ scom->mdev.parent = dev;
+ list_add(&scom->link, &scom_devices);
+
+ return misc_register(&scom->mdev);
+}
+
+static int scom_remove(struct device *dev)
+{
+ struct scom_device *scom, *scom_tmp;
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+
+ list_for_each_entry_safe(scom, scom_tmp, &scom_devices, link) {
+ if (scom->fsi_dev == fsi_dev) {
+ list_del(&scom->link);
+ ida_simple_remove(&scom_ida, scom->idx);
+ misc_deregister(&scom->mdev);
+ }
+ }
+
+ return 0;
+}
+
+static struct fsi_device_id scom_ids[] = {
+ {
+ .engine_type = FSI_ENGID_SCOM,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver scom_drv = {
+ .id_table = scom_ids,
+ .drv = {
+ .name = "scom",
+ .bus = &fsi_bus_type,
+ .probe = scom_probe,
+ .remove = scom_remove,
+ }
+};
+
+static int scom_init(void)
+{
+ INIT_LIST_HEAD(&scom_devices);
+ return fsi_driver_register(&scom_drv);
+}
+
+static void scom_exit(void)
+{
+ struct list_head *pos;
+ struct scom_device *scom;
+
+ list_for_each(pos, &scom_devices) {
+ scom = list_entry(pos, struct scom_device, link);
+ misc_deregister(&scom->mdev);
+ devm_kfree(&scom->fsi_dev->dev, scom);
+ }
+ fsi_driver_unregister(&scom_drv);
+}
+
+module_init(scom_init);
+module_exit(scom_exit);
+MODULE_LICENSE("GPL");
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver
2017-04-05 2:06 ` [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver Christopher Bostic
@ 2017-04-05 16:35 ` Randy Dunlap
[not found] ` <bddbb80e-10b6-fbb9-152a-6e192dfe0745-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
0 siblings, 1 reply; 30+ messages in thread
From: Randy Dunlap @ 2017-04-05 16:35 UTC (permalink / raw)
To: Christopher Bostic, robh+dt, mark.rutland, linux, rostedt, mingo,
gregkh, devicetree, linux-arm-kernel
Cc: andrew, alistair, linux-kernel, joel, Edward A . James, benh,
Jeremy Kerr
On 04/04/17 19:06, Christopher Bostic wrote:
> From: Chris Bostic <cbostic@linux.vnet.ibm.com>
>
> Create a simple SCOM engine device driver that reads and writes
> its control registers via an FSI bus.
>
> Includes changes from Edward A. James <eajames@us.ibm.com>.
>
> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>
> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
> ---
> drivers/fsi/Kconfig | 6 ++
> drivers/fsi/Makefile | 1 +
> drivers/fsi/fsi-scom.c | 263 +++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 270 insertions(+)
> create mode 100644 drivers/fsi/fsi-scom.c
>
> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
> index 9cf8345..0fa265c 100644
> --- a/drivers/fsi/Kconfig
> +++ b/drivers/fsi/Kconfig
> @@ -18,6 +18,12 @@ config FSI_MASTER_GPIO
> ---help---
> This option enables a FSI master driver using GPIO lines.
>
> +config FSI_SCOM
> + tristate "SCOM FSI client device driver"
> + depends on FSI
depends on FSI is redundant.
> + ---help---
> + This option enables an FSI based SCOM device driver.
> +
> endif
>
--
~Randy
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v5 22/23] drivers/fsi: Add hub master support
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (10 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 16:36 ` Randy Dunlap
2017-04-05 2:06 ` [PATCH v5 23/23] drivers/fsi: Use asynchronous slave mode Christopher Bostic
12 siblings, 1 reply; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Chris Bostic, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Jeremy Kerr
From: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Add an engine driver to expose a "hub" FSI master - which has a set of
control registers in the engine address space, and uses a chunk of the
slave address space for actual FSI communication.
Additional changes from Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>.
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
drivers/fsi/Kconfig | 9 ++
drivers/fsi/Makefile | 1 +
drivers/fsi/fsi-master-hub.c | 327 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 337 insertions(+)
create mode 100644 drivers/fsi/fsi-master-hub.c
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index 0fa265c..e1156b4 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -18,6 +18,15 @@ config FSI_MASTER_GPIO
---help---
This option enables a FSI master driver using GPIO lines.
+config FSI_MASTER_HUB
+ tristate "FSI hub master"
+ depends on FSI
+ ---help---
+ This option enables a FSI hub master driver. Hub is a type of FSI
+ master that is connected to the upstream master via a slave. Hubs
+ allow chaining of FSI links to an arbitrary depth. This allows for
+ a high target device fanout.
+
config FSI_SCOM
tristate "SCOM FSI client device driver"
depends on FSI
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index 3466f08..65eb99d 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_FSI) += fsi-core.o
+obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o
obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
diff --git a/drivers/fsi/fsi-master-hub.c b/drivers/fsi/fsi-master-hub.c
new file mode 100644
index 0000000..133b9bf
--- /dev/null
+++ b/drivers/fsi/fsi-master-hub.c
@@ -0,0 +1,327 @@
+/*
+ * FSI hub master driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "fsi-master.h"
+
+/* Control Registers */
+#define FSI_MMODE 0x0 /* R/W: mode */
+#define FSI_MDLYR 0x4 /* R/W: delay */
+#define FSI_MCRSP 0x8 /* R/W: clock rate */
+#define FSI_MENP0 0x10 /* R/W: enable */
+#define FSI_MLEVP0 0x18 /* R: plug detect */
+#define FSI_MSENP0 0x18 /* S: Set enable */
+#define FSI_MCENP0 0x20 /* C: Clear enable */
+#define FSI_MAEB 0x70 /* R: Error address */
+#define FSI_MVER 0x74 /* R: master version/type */
+#define FSI_MRESP0 0xd0 /* W: Port reset */
+#define FSI_MESRB0 0x1d0 /* R: Master error status */
+#define FSI_MRESB0 0x1d0 /* W: Reset bridge */
+#define FSI_MECTRL 0x2e0 /* W: Error control */
+
+/* MMODE: Mode control */
+#define FSI_MMODE_EIP 0x80000000 /* Enable interrupt polling */
+#define FSI_MMODE_ECRC 0x40000000 /* Enable error recovery */
+#define FSI_MMODE_EPC 0x10000000 /* Enable parity checking */
+#define FSI_MMODE_P8_TO_LSB 0x00000010 /* Timeout value LSB */
+ /* MSB=1, LSB=0 is 0.8 ms */
+ /* MSB=0, LSB=1 is 0.9 ms */
+#define FSI_MMODE_CRS0SHFT 18 /* Clk rate selection 0 shift */
+#define FSI_MMODE_CRS0MASK 0x3ff /* Clk rate selection 0 mask */
+#define FSI_MMODE_CRS1SHFT 8 /* Clk rate selection 1 shift */
+#define FSI_MMODE_CRS1MASK 0x3ff /* Clk rate selection 1 mask */
+
+/* MRESB: Reset brindge */
+#define FSI_MRESB_RST_GEN 0x80000000 /* General reset */
+#define FSI_MRESB_RST_ERR 0x40000000 /* Error Reset */
+
+/* MRESB: Reset port */
+#define FSI_MRESP_RST_ALL_MASTER 0x20000000 /* Reset all FSI masters */
+#define FSI_MRESP_RST_ALL_LINK 0x10000000 /* Reset all FSI port contr. */
+#define FSI_MRESP_RST_MCR 0x08000000 /* Reset FSI master reg. */
+#define FSI_MRESP_RST_PYE 0x04000000 /* Reset FSI parity error */
+#define FSI_MRESP_RST_ALL 0xfc000000 /* Reset any error */
+
+/* MECTRL: Error control */
+#define FSI_MECTRL_EOAE 0x8000 /* Enable machine check when */
+ /* master 0 in error */
+#define FSI_MECTRL_P8_AUTO_TERM 0x4000 /* Auto terminate */
+
+#define FSI_ENGID_HUB_MASTER 0x1c
+#define FSI_HUB_LINK_OFFSET 0x80000
+#define FSI_HUB_LINK_SIZE 0x80000
+#define FSI_HUB_MASTER_MAX_LINKS 8
+
+#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */
+
+/*
+ * FSI hub master support
+ *
+ * A hub master increases the number of potential target devices that the
+ * primary FSI master can access. For each link a primary master supports,
+ * each of those links can in turn be chained to a hub master with multiple
+ * links of its own.
+ *
+ * The hub is controlled by a set of control registers exposed as a regular fsi
+ * device (the hub->upstream device), and provides access to the downstream FSI
+ * bus as through an address range on the slave itself (->addr and ->size).
+ *
+ * [This differs from "cascaded" masters, which expose the entire downstream
+ * bus entirely through the fsi device address range, and so have a smaller
+ * accessible address space.]
+ */
+struct fsi_master_hub {
+ struct fsi_master master;
+ struct fsi_device *upstream;
+ uint32_t addr, size; /* slave-relative addr of */
+ /* master address space */
+};
+
+#define to_fsi_master_hub(m) container_of(m, struct fsi_master_hub, master)
+
+static int hub_master_read(struct fsi_master *master, int link,
+ uint8_t id, uint32_t addr, void *val, size_t size)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+
+ if (id != 0)
+ return -EINVAL;
+
+ addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
+ return fsi_slave_read(hub->upstream->slave, addr, val, size);
+}
+
+static int hub_master_write(struct fsi_master *master, int link,
+ uint8_t id, uint32_t addr, const void *val, size_t size)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+
+ if (id != 0)
+ return -EINVAL;
+
+ addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
+ return fsi_slave_write(hub->upstream->slave, addr, val, size);
+}
+
+static int hub_master_break(struct fsi_master *master, int link)
+{
+ uint32_t addr, cmd;
+
+ addr = 0x4;
+ cmd = cpu_to_be32(0xc0de0000);
+
+ return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
+}
+
+static int hub_master_link_enable(struct fsi_master *master, int link)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+ int idx, bit;
+ __be32 reg;
+ int rc;
+
+ idx = link / 32;
+ bit = link % 32;
+
+ reg = cpu_to_be32(0x80000000 >> bit);
+
+ rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), ®, 4);
+
+ mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+ fsi_device_read(hub->upstream, FSI_MENP0 + (4 * idx), ®, 4);
+
+ return rc;
+}
+
+static void hub_master_release(struct device *dev)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(dev_to_fsi_master(dev));
+
+ kfree(hub);
+}
+
+/* mmode encoders */
+static inline u32 fsi_mmode_crs0(u32 x)
+{
+ return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
+}
+
+static inline u32 fsi_mmode_crs1(u32 x)
+{
+ return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
+}
+
+static int hub_master_init(struct fsi_master_hub *hub)
+{
+ struct fsi_device *dev = hub->upstream;
+ __be32 reg;
+ int rc;
+
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+ | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+ rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Initialize the MFSI (hub master) engine */
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+ | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+ rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
+ rc = fsi_device_write(dev, FSI_MECTRL, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
+ | fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
+ | FSI_MMODE_P8_TO_LSB);
+ rc = fsi_device_write(dev, FSI_MMODE, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(0xffff0000);
+ rc = fsi_device_write(dev, FSI_MDLYR, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = ~0;
+ rc = fsi_device_write(dev, FSI_MSENP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Leave enabled long enough for master logic to set up */
+ mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+ rc = fsi_device_write(dev, FSI_MCENP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(dev, FSI_MAEB, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
+ rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(dev, FSI_MLEVP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Reset the master bridge */
+ reg = cpu_to_be32(FSI_MRESB_RST_GEN);
+ rc = fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MRESB_RST_ERR);
+ return fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
+}
+
+static int hub_master_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct fsi_master_hub *hub;
+ uint32_t reg, links;
+ __be32 __reg;
+ int rc;
+
+ rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
+ if (rc)
+ return rc;
+
+ reg = be32_to_cpu(__reg);
+ links = (reg >> 8) & 0xff;
+ dev_info(dev, "hub version %08x (%d links)\n", reg, links);
+
+ rc = fsi_slave_claim_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
+ FSI_HUB_LINK_SIZE * links);
+ if (rc) {
+ dev_err(dev, "can't claim slave address range for links");
+ return rc;
+ }
+
+ hub = kzalloc(sizeof(*hub), GFP_KERNEL);
+ if (!hub) {
+ rc = -ENOMEM;
+ goto err_release;
+ }
+
+ hub->addr = FSI_HUB_LINK_OFFSET;
+ hub->size = FSI_HUB_LINK_SIZE * links;
+ hub->upstream = fsi_dev;
+
+ hub->master.dev.parent = dev;
+ hub->master.dev.release = hub_master_release;
+
+ hub->master.n_links = links;
+ hub->master.read = hub_master_read;
+ hub->master.write = hub_master_write;
+ hub->master.send_break = hub_master_break;
+ hub->master.link_enable = hub_master_link_enable;
+
+ dev_set_drvdata(dev, hub);
+
+ hub_master_init(hub);
+
+ rc = fsi_master_register(&hub->master);
+ if (!rc)
+ return 0;
+
+ kfree(hub);
+err_release:
+ fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
+ FSI_HUB_LINK_SIZE * links);
+ return rc;
+}
+
+static int hub_master_remove(struct device *dev)
+{
+ struct fsi_master_hub *hub = dev_get_drvdata(dev);
+
+ fsi_master_unregister(&hub->master);
+ fsi_slave_release_range(hub->upstream->slave, hub->addr, hub->size);
+ return 0;
+}
+
+static struct fsi_device_id hub_master_ids[] = {
+ {
+ .engine_type = FSI_ENGID_HUB_MASTER,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver hub_master_driver = {
+ .id_table = hub_master_ids,
+ .drv = {
+ .name = "fsi-master-hub",
+ .bus = &fsi_bus_type,
+ .probe = hub_master_probe,
+ .remove = hub_master_remove,
+ }
+};
+
+module_fsi_driver(hub_master_driver);
+MODULE_LICENSE("GPL");
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH v5 22/23] drivers/fsi: Add hub master support
2017-04-05 2:06 ` [PATCH v5 22/23] drivers/fsi: Add hub master support Christopher Bostic
@ 2017-04-05 16:36 ` Randy Dunlap
[not found] ` <8c841062-62e9-77c6-b0c9-e0da73cad3ac-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
0 siblings, 1 reply; 30+ messages in thread
From: Randy Dunlap @ 2017-04-05 16:36 UTC (permalink / raw)
To: Christopher Bostic, robh+dt, mark.rutland, linux, rostedt, mingo,
gregkh, devicetree, linux-arm-kernel
Cc: andrew, alistair, linux-kernel, joel, benh, Jeremy Kerr
On 04/04/17 19:06, Christopher Bostic wrote:
> From: Chris Bostic <cbostic@linux.vnet.ibm.com>
>
> Add an engine driver to expose a "hub" FSI master - which has a set of
> control registers in the engine address space, and uses a chunk of the
> slave address space for actual FSI communication.
>
> Additional changes from Jeremy Kerr <jk@ozlabs.org>.
>
> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> drivers/fsi/Kconfig | 9 ++
> drivers/fsi/Makefile | 1 +
> drivers/fsi/fsi-master-hub.c | 327 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 337 insertions(+)
> create mode 100644 drivers/fsi/fsi-master-hub.c
>
> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
> index 0fa265c..e1156b4 100644
> --- a/drivers/fsi/Kconfig
> +++ b/drivers/fsi/Kconfig
> @@ -18,6 +18,15 @@ config FSI_MASTER_GPIO
> ---help---
> This option enables a FSI master driver using GPIO lines.
>
> +config FSI_MASTER_HUB
> + tristate "FSI hub master"
> + depends on FSI
redundant again.
> + ---help---
> + This option enables a FSI hub master driver. Hub is a type of FSI
> + master that is connected to the upstream master via a slave. Hubs
> + allow chaining of FSI links to an arbitrary depth. This allows for
> + a high target device fanout.
> +
> config FSI_SCOM
> tristate "SCOM FSI client device driver"
> depends on FSI
--
~Randy
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v5 23/23] drivers/fsi: Use asynchronous slave mode
[not found] ` <20170405020607.79939-1-cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
` (11 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 22/23] drivers/fsi: Add hub master support Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
12 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, rostedt-nx8X9YLhiw1AfugRpC6u6w,
mingo-H+wXaHxf7aLQT0dZR+AlfA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Jeremy Kerr, joel-U3u1mxZcP9KHXe+LvDLADg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, andrew-zrmu5oMJ5Fs,
alistair-Y4h6yKqj69EXC2x5gXVKYQ,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r, Chris Bostic
From: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
For slaves that are behind a software-clocked master, we want FSI CFAMs
to run asynchronously to the FSI clock, so set up our slaves to be in
async mode.
Signed-off-by: Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Signed-off-by: Chris Bostic <cbostic-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
---
drivers/fsi/fsi-core.c | 22 +++++++++++++++++++++-
drivers/fsi/fsi-master-gpio.c | 1 +
drivers/fsi/fsi-master.h | 2 ++
3 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 747d0e3..a6ed34f 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -47,6 +47,7 @@
#define FSI_SMODE 0x0 /* R/W: Mode register */
#define FSI_SISC 0x8 /* R/W: Interrupt condition */
#define FSI_SSTAT 0x14 /* R : Slave status */
+#define FSI_LLMODE 0x100 /* R/W: Link layer mode register */
/*
* SMODE fields
@@ -62,6 +63,11 @@
#define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */
#define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */
+/*
+ * LLMODE fields
+ */
+#define FSI_LLMODE_ASYNC 0x1
+
#define FSI_SLAVE_SIZE_23b 0x800000
static DEFINE_IDA(master_ida);
@@ -560,8 +566,8 @@ static void fsi_slave_release(struct device *dev)
static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
{
+ uint32_t chip_id, llmode;
struct fsi_slave *slave;
- uint32_t chip_id;
uint8_t crc;
int rc;
@@ -597,6 +603,20 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
return -ENODEV;
}
+ /* If we're behind a master that doesn't provide a self-running bus
+ * clock, put the slave into async mode
+ */
+ if (master->flags & FSI_MASTER_FLAG_SWCLOCK) {
+ llmode = cpu_to_be32(FSI_LLMODE_ASYNC);
+ rc = fsi_master_write(master, link, id,
+ FSI_SLAVE_BASE + FSI_LLMODE,
+ &llmode, sizeof(llmode));
+ if (rc)
+ dev_warn(&master->dev,
+ "can't set llmode on slave:%02x:%02x %d\n",
+ link, id, rc);
+ }
+
/* We can communicate with a slave; create the slave device and
* register.
*/
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index 5d9e0b0..d5cce88 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -569,6 +569,7 @@ static int fsi_master_gpio_probe(struct platform_device *pdev)
master->gpio_mux = gpio;
master->master.n_links = 1;
+ master->master.flags = FSI_MASTER_FLAG_SWCLOCK;
master->master.read = fsi_master_gpio_read;
master->master.write = fsi_master_gpio_write;
master->master.term = fsi_master_gpio_term;
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
index d6a4885..fd39924 100644
--- a/drivers/fsi/fsi-master.h
+++ b/drivers/fsi/fsi-master.h
@@ -19,6 +19,8 @@
#include <linux/device.h>
+#define FSI_MASTER_FLAG_SWCLOCK 0x1
+
struct fsi_master {
struct device dev;
int idx;
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread