public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Rishikesh Donadkar <r-donadkar@ti.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
	<jai.luthra@linux.dev>, <laurent.pinchart@ideasonboard.com>,
	<mripard@kernel.org>
Cc: <y-abhilashchandra@ti.com>, <devarsht@ti.com>, <s-jain1@ti.com>,
	<vigneshr@ti.com>, <mchehab@kernel.org>, <robh@kernel.org>,
	<krzk+dt@kernel.org>, <p.zabel@pengutronix.de>,
	<conor+dt@kernel.org>, <sakari.ailus@linux.intel.com>,
	<hverkuil-cisco@xs4all.nl>, <jai.luthra@ideasonboard.com>,
	<changhuang.liang@starfivetech.com>, <jack.zhu@starfivetech.com>,
	<sjoerd@collabora.com>, <dan.carpenter@linaro.org>,
	<hverkuil+cisco@kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v8 16/18] media: cadence: csi2rx: Support runtime PM
Date: Thu, 18 Dec 2025 11:05:55 +0530	[thread overview]
Message-ID: <9111c947-ef0f-4c4a-a09f-6da0901a8510@ti.com> (raw)
In-Reply-To: <a4bba302-8be2-4bbd-96c8-3a20472e0c12@ideasonboard.com>


On 01/12/25 18:41, Tomi Valkeinen wrote:
> Hi,


Hi Tomi,

Thank you for the review !

>
> On 12/11/2025 13:54, Rishikesh Donadkar wrote:
>> From: Changhuang Liang <changhuang.liang@starfivetech.com>
>>
>> Use runtime power management hooks to save power when CSI-RX is not in
>> use.
>>
>> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
>> Tested-by: Rishikesh Donadkar <r-donadkar@ti.com>
>> Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
>> Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
>> Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
>> ---
>>   drivers/media/platform/cadence/Kconfig       |   1 +
>>   drivers/media/platform/cadence/cdns-csi2rx.c | 129 ++++++++++++-------
>>   2 files changed, 83 insertions(+), 47 deletions(-)
>>
>> diff --git a/drivers/media/platform/cadence/Kconfig b/drivers/media/platform/cadence/Kconfig
>> index 1aa608c00dbce..ea85ef82760e6 100644
>> --- a/drivers/media/platform/cadence/Kconfig
>> +++ b/drivers/media/platform/cadence/Kconfig
>> @@ -5,6 +5,7 @@ comment "Cadence media platform drivers"
>>   config VIDEO_CADENCE_CSI2RX
>>   	tristate "Cadence MIPI-CSI2 RX Controller"
>>   	depends on VIDEO_DEV
>> +	depends on PM
>>   	select MEDIA_CONTROLLER
>>   	select VIDEO_V4L2_SUBDEV_API
>>   	select V4L2_FWNODE
>> diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
>> index 833bc134f17cb..6447c225ba354 100644
>> --- a/drivers/media/platform/cadence/cdns-csi2rx.c
>> +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
>> @@ -337,11 +337,6 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
>>   	u32 reg;
>>   	int ret;
>>   
>> -	ret = clk_prepare_enable(csi2rx->p_clk);
>> -	if (ret)
>> -		return ret;
>> -
>> -	reset_control_deassert(csi2rx->p_rst);
>>   	csi2rx_reset(csi2rx);
>>   
>>   	if (csi2rx->error_irq >= 0)
>> @@ -382,7 +377,7 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
>>   		if (ret) {
>>   			dev_err(csi2rx->dev,
>>   				"Failed to configure external DPHY: %d\n", ret);
>> -			goto err_disable_pclk;
>> +			return ret;
>>   		}
>>   	}
>>   
>> @@ -397,12 +392,6 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
>>   	 * hence the reference counting.
>>   	 */
>>   	for (i = 0; i < csi2rx->max_streams; i++) {
>> -		ret = clk_prepare_enable(csi2rx->pixel_clk[i]);
>> -		if (ret)
>> -			goto err_disable_pixclk;
>> -
>> -		reset_control_deassert(csi2rx->pixel_rst[i]);
>> -
>>   		writel(CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF |
>>   			       FIELD_PREP(CSI2RX_STREAM_CFG_NUM_PIXELS_MASK,
>>   					  csi2rx->num_pixels[i]),
>> @@ -415,30 +404,8 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
>>   		       csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
>>   	}
>>   
>> -	ret = clk_prepare_enable(csi2rx->sys_clk);
>> -	if (ret)
>> -		goto err_disable_pixclk;
>> -
>> -	reset_control_deassert(csi2rx->sys_rst);
>> -
>> -	clk_disable_unprepare(csi2rx->p_clk);
>>   
>>   	return 0;
>> -
>> -err_disable_pixclk:
>> -	for (; i > 0; i--) {
>> -		reset_control_assert(csi2rx->pixel_rst[i - 1]);
>> -		clk_disable_unprepare(csi2rx->pixel_clk[i - 1]);
>> -	}
>> -
>> -	if (csi2rx->dphy) {
>> -		writel(0, csi2rx->base + CSI2RX_DPHY_LANE_CTRL_REG);
>> -		phy_power_off(csi2rx->dphy);
>> -	}
>> -err_disable_pclk:
>> -	clk_disable_unprepare(csi2rx->p_clk);
>> -
>> -	return ret;
>>   }
>>   
>>   static void csi2rx_stop(struct csi2rx_priv *csi2rx)
>> @@ -447,10 +414,6 @@ static void csi2rx_stop(struct csi2rx_priv *csi2rx)
>>   	u32 val;
>>   	int ret;
>>   
>> -	clk_prepare_enable(csi2rx->p_clk);
>> -	reset_control_assert(csi2rx->sys_rst);
>> -	clk_disable_unprepare(csi2rx->sys_clk);
>> -
>>   	writel(0, csi2rx->base + CSI2RX_ERROR_IRQS_MASK_REG);
>>   
>>   	for (i = 0; i < csi2rx->max_streams; i++) {
>> @@ -465,14 +428,8 @@ static void csi2rx_stop(struct csi2rx_priv *csi2rx)
>>   		if (ret)
>>   			dev_warn(csi2rx->dev,
>>   				 "Failed to stop streaming on pad%u\n", i);
>> -
>> -		reset_control_assert(csi2rx->pixel_rst[i]);
>> -		clk_disable_unprepare(csi2rx->pixel_clk[i]);
>>   	}
>>   
>> -	reset_control_assert(csi2rx->p_rst);
>> -	clk_disable_unprepare(csi2rx->p_clk);
>> -
>>   	if (csi2rx->dphy) {
>>   		writel(0, csi2rx->base + CSI2RX_DPHY_LANE_CTRL_REG);
>>   
>> @@ -548,10 +505,17 @@ static int csi2rx_enable_streams(struct v4l2_subdev *subdev,
>>   	 * enable the whole controller.
>>   	 */
>>   	if (!csi2rx->count) {
>> +		ret = pm_runtime_resume_and_get(csi2rx->dev);
>> +		if (ret < 0)
>> +			return ret;
>> +
>>   		csi2rx_update_vc_select(csi2rx, state);
>> +
>>   		ret = csi2rx_start(csi2rx);
>> -		if (ret)
>> +		if (ret) {
>> +			pm_runtime_put(csi2rx->dev);
>>   			return ret;
>> +		}
>>   	}
>>   
>>   	/* Start streaming on the source */
>> @@ -561,8 +525,10 @@ static int csi2rx_enable_streams(struct v4l2_subdev *subdev,
>>   		dev_err(csi2rx->dev,
>>   			"Failed to start streams %#llx on subdev\n",
>>   			sink_streams);
>> -		if (!csi2rx->count)
>> +		if (!csi2rx->count) {
>>   			csi2rx_stop(csi2rx);
>> +			pm_runtime_put(csi2rx->dev);
> Probably time to add 'goto' based error handling to this func... Maybe
> in this patch, maybe as a separate patch before this.


Okay, I will do it in this patch itself.


Rishikesh

>
>   Tomi
>
>> +		}
>>   		return ret;
>>   	}
>>   
>> @@ -589,8 +555,10 @@ static int csi2rx_disable_streams(struct v4l2_subdev *subdev,
>>   	csi2rx->count--;
>>   
>>   	/* Let the last user turn off the lights. */
>> -	if (!csi2rx->count)
>> +	if (!csi2rx->count) {
>>   		csi2rx_stop(csi2rx);
>> +		pm_runtime_put(csi2rx->dev);
>> +	}
>>   
>>   	return 0;
>>   }
>> @@ -1092,6 +1060,7 @@ static int csi2rx_probe(struct platform_device *pdev)
>>   	if (ret)
>>   		goto err_cleanup;
>>   
>> +	pm_runtime_enable(csi2rx->dev);
>>   	ret = v4l2_async_register_subdev(&csi2rx->subdev);
>>   	if (ret < 0)
>>   		goto err_free_state;
>> @@ -1106,6 +1075,7 @@ static int csi2rx_probe(struct platform_device *pdev)
>>   
>>   err_free_state:
>>   	v4l2_subdev_cleanup(&csi2rx->subdev);
>> +	pm_runtime_disable(csi2rx->dev);
>>   err_cleanup:
>>   	v4l2_async_nf_unregister(&csi2rx->notifier);
>>   	v4l2_async_nf_cleanup(&csi2rx->notifier);
>> @@ -1124,9 +1094,73 @@ static void csi2rx_remove(struct platform_device *pdev)
>>   	v4l2_async_unregister_subdev(&csi2rx->subdev);
>>   	v4l2_subdev_cleanup(&csi2rx->subdev);
>>   	media_entity_cleanup(&csi2rx->subdev.entity);
>> +	pm_runtime_disable(csi2rx->dev);
>>   	kfree(csi2rx);
>>   }
>>   
>> +static int csi2rx_runtime_suspend(struct device *dev)
>> +{
>> +	struct csi2rx_priv *csi2rx = dev_get_drvdata(dev);
>> +	unsigned int i;
>> +
>> +	reset_control_assert(csi2rx->sys_rst);
>> +	clk_disable_unprepare(csi2rx->sys_clk);
>> +
>> +	for (i = 0; i < csi2rx->max_streams; i++) {
>> +		reset_control_assert(csi2rx->pixel_rst[i]);
>> +		clk_disable_unprepare(csi2rx->pixel_clk[i]);
>> +	}
>> +
>> +	reset_control_assert(csi2rx->p_rst);
>> +	clk_disable_unprepare(csi2rx->p_clk);
>> +
>> +	return 0;
>> +}
>> +
>> +static int csi2rx_runtime_resume(struct device *dev)
>> +{
>> +	struct csi2rx_priv *csi2rx = dev_get_drvdata(dev);
>> +	unsigned int i;
>> +	int ret;
>> +
>> +	ret = clk_prepare_enable(csi2rx->p_clk);
>> +	if (ret)
>> +		return ret;
>> +
>> +	reset_control_deassert(csi2rx->p_rst);
>> +
>> +	for (i = 0; i < csi2rx->max_streams; i++) {
>> +		ret = clk_prepare_enable(csi2rx->pixel_clk[i]);
>> +		if (ret)
>> +			goto err_disable_pixclk;
>> +
>> +		reset_control_deassert(csi2rx->pixel_rst[i]);
>> +	}
>> +
>> +	ret = clk_prepare_enable(csi2rx->sys_clk);
>> +	if (ret)
>> +		goto err_disable_pixclk;
>> +
>> +	reset_control_deassert(csi2rx->sys_rst);
>> +
>> +	return 0;
>> +
>> +err_disable_pixclk:
>> +	for (; i > 0; i--) {
>> +		reset_control_assert(csi2rx->pixel_rst[i - 1]);
>> +		clk_disable_unprepare(csi2rx->pixel_clk[i - 1]);
>> +	}
>> +
>> +	reset_control_assert(csi2rx->p_rst);
>> +	clk_disable_unprepare(csi2rx->p_clk);
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct dev_pm_ops csi2rx_pm_ops = {
>> +	RUNTIME_PM_OPS(csi2rx_runtime_suspend, csi2rx_runtime_resume, NULL)
>> +};
>> +
>>   static const struct of_device_id csi2rx_of_table[] = {
>>   	{ .compatible = "starfive,jh7110-csi2rx" },
>>   	{ .compatible = "cdns,csi2rx" },
>> @@ -1141,6 +1175,7 @@ static struct platform_driver csi2rx_driver = {
>>   	.driver	= {
>>   		.name		= "cdns-csi2rx",
>>   		.of_match_table	= csi2rx_of_table,
>> +		.pm		= &csi2rx_pm_ops,
>>   	},
>>   };
>>   module_platform_driver(csi2rx_driver);

  reply	other threads:[~2025-12-18  5:36 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-12 11:54 [PATCH v8 00/18] media: cadence,ti: CSI2RX Multistream Support Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 01/18] media: ti: j721e-csi2rx: Remove word size alignment on frame width Rishikesh Donadkar
2025-11-20 11:58   ` Tomi Valkeinen
2025-11-12 11:54 ` [PATCH v8 02/18] dt-bindings: media: ti,j721e-csi2rx-shim: Support 32 dma chans Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 03/18] media: ti: j721e-csi2rx: separate out device and context Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 04/18] media: ti: j721e-csi2rx: prepare SHIM code for multiple contexts Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 05/18] media: ti: j721e-csi2rx: allocate DMA channel based on context index Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 06/18] media: ti: j721e-csi2rx: add a subdev for the core device Rishikesh Donadkar
2025-11-20 12:39   ` Sakari Ailus
2025-11-21  6:59     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 07/18] media: cadence: csi2rx: Move to .enable/disable_streams API Rishikesh Donadkar
2025-11-20 13:00   ` Tomi Valkeinen
2025-11-21  7:02     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 08/18] media: ti: j721e-csi2rx: " Rishikesh Donadkar
2025-11-20 12:40   ` Sakari Ailus
2025-11-21  7:04     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 09/18] media: ti: j721e-csi2rx: get number of contexts from device tree Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 10/18] media: cadence: csi2rx: add get_frame_desc wrapper Rishikesh Donadkar
2025-11-20 12:40   ` Tomi Valkeinen
2025-12-02  9:03     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 11/18] media: ti: j721e-csi2rx: add support for processing virtual channels Rishikesh Donadkar
2025-11-20 12:32   ` Tomi Valkeinen
2025-12-01  9:25     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 12/18] media: cadence: csi2rx: add multistream support Rishikesh Donadkar
2025-11-20 12:53   ` Sakari Ailus
2025-12-09  9:43     ` Rishikesh Donadkar
2025-12-29 11:14       ` Sakari Ailus
2025-11-20 13:14   ` Tomi Valkeinen
2025-12-09  9:45     ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 13/18] media: ti: j721e-csi2rx: " Rishikesh Donadkar
2025-12-01 13:03   ` Tomi Valkeinen
2025-12-09 10:08     ` Rishikesh Donadkar
2025-12-09 10:36       ` Jai Luthra
2025-12-09 11:52         ` Tomi Valkeinen
2025-12-09 12:06           ` Jai Luthra
2025-11-12 11:54 ` [PATCH v8 14/18] media: ti: j721e-csi2rx: Submit all available buffers Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 15/18] media: ti: j721e-csi2rx: Change the drain architecture for multistream Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 16/18] media: cadence: csi2rx: Support runtime PM Rishikesh Donadkar
2025-12-01 13:11   ` Tomi Valkeinen
2025-12-18  5:35     ` Rishikesh Donadkar [this message]
2025-11-12 11:54 ` [PATCH v8 17/18] media: ti: j721e-csi2rx: Support runtime suspend Rishikesh Donadkar
2025-11-20 13:16   ` Sakari Ailus
2025-12-08  7:47     ` Jai Luthra
2025-12-08  9:39       ` Sakari Ailus
2025-12-01 13:22   ` Tomi Valkeinen
2025-12-08  7:36     ` Jai Luthra
2025-12-29 10:07       ` Rishikesh Donadkar
2025-11-12 11:54 ` [PATCH v8 18/18] media: ti: j721e-csi2rx: Support system suspend using pm_notifier Rishikesh Donadkar
2025-12-01 13:46   ` Tomi Valkeinen
2025-12-08  8:01     ` Jai Luthra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9111c947-ef0f-4c4a-a09f-6da0901a8510@ti.com \
    --to=r-donadkar@ti.com \
    --cc=changhuang.liang@starfivetech.com \
    --cc=conor+dt@kernel.org \
    --cc=dan.carpenter@linaro.org \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil+cisco@kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jack.zhu@starfivetech.com \
    --cc=jai.luthra@ideasonboard.com \
    --cc=jai.luthra@linux.dev \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=s-jain1@ti.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sjoerd@collabora.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=vigneshr@ti.com \
    --cc=y-abhilashchandra@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox