[PATCH v2 5/6] arm64: dts: qcom: sm8450: Add fallback CCI compatible

Konrad Dybcio
2022-12-13T18:33:43Z

Add a fallback CCI compatible, as required by bindings.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Changes in v2:
- new patch

arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index a8f8ffd728d7..a9ed8443ac02 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2554,7 +2554,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};

cci0: cci@ac15000 {
- compatible = "qcom,sm8450-cci";
+ compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
reg = <0 0xac15000 0 0x1000>;
interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
power-domains = <&camcc TITAN_TOP_GDSC>;
@@ -2593,7 +2593,7 @@ cci0_i2c1: i2c-bus@1 {
};

cci1: cci@ac16000 {
- compatible = "qcom,sm8450-cci";
+ compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
reg = <0 0xac16000 0 0x1000>;
interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
power-domains = <&camcc TITAN_TOP_GDSC>;
--
2.39.0